Your cart is empty.
Your cart is empty. This is one of strongest bipolar Nema 17 stepper motor with 1.8 deg. step angle (200 steps/revolution).
Each phase draws 2.1A, allowing for a holding torque up to 65Ncm(92oz.in).
Electrical Specification:
* Manufacturer Part Number: 17HS24-2104S
* Motor Type: Bipolar Stepper
* Step Angle: 1.8 deg.
* Holding Torque: 65Ncm(92oz.in)
* Rated Current/phase: 2.1A
* Phase Resistance: 1.6ohms
* Inductance: 3mH+/-20%(1KHz)
Physical Specification:
* Frame Size: 42 x 42mm
* Body Length: 60mm
* Shaft Diameter: 5mm
* Shaft Length: 24mm
* D-cut Length: 15mm
* Number of Leads: 4
* Lead Length: 500mm
* Weight: 500g
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
Niclas
Reviewed in Sweden on September 28, 2024
it works
lorenzo
Reviewed in Italy on February 22, 2024
ottima per la mia cnc
Daniel
Reviewed in Spain on February 12, 2024
Usado en una impresora 3D para el eje Y ya que el peso de la cama influye en la velocidad y precisión, lo recomiendo al 100%, consigo alcanzar velocidades de 500mm/s en recorrido y 6000mm/s cuadrados en aceleraciones en una simple cartesiana, eso si, chetada hasta los topes y klipper. Si queréis un proyecto similar recomiendo este motor para el eje Y, para el X quizás sea demasiado pesado y tendréis que actualizar los motores del Z para contrarrestar el peso extra
R George
Reviewed in the United States on February 11, 2023
I have two drives for the Right Ascension on my telescope. A smaller stepper drive for the clock drive, and this larger more powerful stepper motor to slew the telescope around ( 6 hours in about 10 seconds). A smaller motor doesn't have enough power to overcome the clutch system to turn the telescope, but this larger motor (running at 2400 steps per second) easily turns the telescope.
Dan
Reviewed in the United States on March 20, 2022
These are great steppers. I am using them in a new 3D printer build. They have a lot of torque do not get very warm after hours of printing.
Manuel Bergeron
Reviewed in Canada on February 2, 2022
Même couleur que sur la photo!
quompaCC
Reviewed in Germany on November 3, 2022
Hab die Motoren beim meinem voron clone im Einsatz. Habe die Motoren mit 1A im Betrieb, die werden nicht mal lauwarm. Im Vergleich mit den kleinen Motoren die ich vorher im Einsatz hatte, die schon bei 0,8A extrem heiß geworden sind. Kann ich auf jeden Fall nur empfehlen.
LionCat
Reviewed in the United States on November 2, 2022
Small size for torque in a NEMA 17 MOUNTING
Nathan M.
Reviewed in the United States on March 24, 2020
I use these guys for my extruder, awesome stepper motor, strong and hasn't given out for the beating I give it.
Biggie's Equipment
Reviewed in the United States on February 2, 2019
Great little motor and after running hard it was not very hot always a good sign of good quality.
Firephinx
Reviewed in the United States on June 9, 2018
Very well built, powerful, and well packaged stepper motor. Does exactly what I needed it to do and came quickly. If I needed more stepper motors, I know that I can buy one of these again with no problems. I used it for a class capstone project and it never failed me.
leland modoc
Reviewed in the United States on November 7, 2018
Came exactly as advertised. was packaged extremely well.
John
Reviewed in the United States on December 16, 2016
These seem to be great steppers, beefy, solid, work well on my DIY CNC machine and are producing reliable results.
Recommended Products
$39.90
$ 20 .99 $20.99