Your cart is empty.
Your cart is empty. This is a short geared NEMA 17 Stepper motor. It has an integrated planetary gearbox with a 26.85:1 gear ratio, the resolution reach 0.067 deg. step angle.
It's a good solution in applications that need very low rotation speeds and/or lots of torque.
Electrical Specification:
* Manufacturer Part Number: 17HS13-0404S-PG27
* Motor Type: Bipolar Stepper
* Step Angle: 0.067 deg.
* Holding Torque: 3Nm
* Rated Current/phase: 0.4A
* Phase Resistance: 30ohms
* Inductance: 34mH+/-20%(1KHz)
Gearbox Specifications:
* Gearbox Type: Planetary
* Gear Ratio: 26.85:1
* Efficiency: 81%
* Backlash at No-load: * Max.Permissible Torque: 3Nm(425oz-in)
* Moment Permissible Torque: 5Nm(708oz-in)
* Shaft Maximum Axial Load: 50N
* Shaft Maximum Radial Load: 100N
Physical Specifications:
* Frame Size: 42 x 42mm
* Motor Length: 34mm
* Gearbox Length: 35mm
* Shaft Diameter: 6mm
* Shaft Length: 18mm
* D-cut Length: 12mm
* Number of Leads: 4
* Lead Length: 500mm
* Weight: 420g
Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)
Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
a teacher
Reviewed in the United States on May 19, 2023
This geered stepper motor costs much much less that assembling a gear box to an existing stepper motor.The slippage on the shaft is very small and was not noticible or an issue in my table top experimental apparatus.For the cost and the reward of controlling the rotation of a small apparatus, this might be the way to go for many projects.The quality of the stepper gear system to me was excellent.
Stratocaster
Reviewed in the United States on November 21, 2022
Used with an arduino for a telescope auto focuser.
KELEN
Reviewed in the United States on July 18, 2019
The stepper/gearbox combos have a ton of torque for you CNC application but are extremely slow at this 27:1 ratio due to hitting the steppers max RPM. Depending on your drive method, only about 10mm/s is achievable. trying to go any faster will stall out the motor. Im getting the 5:1 instead, leaving me with enough torque to feed the spindle yet still able to fast travel when i need to.
Jeremy
Reviewed in the United States on August 4, 2018
Great price for motor + gearbox. I bought four.They have approximately 1 degree of backlash.
Customer
Reviewed in the United States on March 19, 2018
Works as advertised. Power/control wires plenty long enough.
Shawn W
Reviewed in the United States on February 7, 2017
Great price and great motor
Recommended Products
$25.08
$ 12 .99 $12.99