Your cart is empty.
Your cart is empty.Product Description
Compatible with M.2 NVMe SSD based enclosure adapter
Package Included
1 x M.2 NVME to USB 3.1 Type-C SSD Enclosure
1 x USB C to USB C Gen2 Cable (10Gbps)
1 x USB A to USB C Cable (10Gbps)
2 x Thermal Pad
1 x Screw Set : 2 screws (1*Scew A and 1*Screw B)
Notice：Insert your NVMe SSD into the enclosure and connect to your laptop’s USB-C or Thunderbolt 3 port to transfer movies, music, and more at speeds of up to 10 Gbps.
The actual speed depends on the speed of your SSD, USB Port type, your computer performance etc, nvme ssd is not included.
SSK USB C M.2 NVMe Tool-Free SSD Enclosure
M.2 NVMe PCIE SSD Based
SSK M.2 NVME SSD Enclosure adopts high performance controller Chipset RTL9210B, with high-speed data transmission speeds up to 10Gbps . 1GB file only takes1 second ;
Attention: It supports PCI-E based M key M.2 NVME SSD read/write speed up to 10Gbps Only;
Not compatible with B Key and B&M Key Connectors. Does not support M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.
- Tool-Free,No tool required
- Interface type: M.2 NVME to USB 3.1 Gen 2
- Support SSD Drivers Size: 2230, 2242, 2260, 2280mm
- Cable 1 : USB C to USB C(150MM)
- Cable 2 : USB3.0 AM to USB C(150MM)
- Color: Silver Grey
M.2 NVME PCIe M key Enclosure Adapter
- Only compatible with NVME M Key connectors
- Not compatible with B Key and B+M Key Connectors.
- Does not support M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.
Attention: NVMe SSDs are not included.
If youdon't know which type is your SSD and you have any questions, please ask SSK Direct before purchasing.
Main Features
Easy Installation & Extreme Data Transfer
Plug and play, no driver required. With USB 3.1 Gen2 interface,provides transfer speeds of up to 1000MB/s,1GB file1 second. Backward compatible with USB 2.0 and USB 1.1.
2* Thermal Pads included for Excellent Heat Dissipation
Everything you need in one package, included 2* thermal pads, you can paste one thermal pad or two side by side to achieve rapid heat dissipation.
Attention: Due to the nvme SSD extreme transmission speed, the temperature is higher than USB3.0 HDD, we tested ours is around 50 °C in writing and below 40 °C in reading, even after a long time R/W, the speed will not drop down or device will not shut down.
Fashion Design
Adopts aluminum alloy shell, Slim design, and excellent heat dissipation, be portable and easy to carry.It will be the best choice for trip and business travel.
Main Features
Tool-free design and fastest USB storage speeds!
Tool-free design and no additional tools required. With two cables, USB A to C and USB C to C which suitable for all Host PC ports.
Supports Plug & Play and Hot-Swapping.
M.2 NVMe SSD Compatibility
- Compatible with M.2 NVMe SSDs
- Not compatible with B Key and B+M Key Connectors. M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs
- NVMe SSDs use exceptionally high performance storage media that will run hot when under load.
- The rubber SSD retention peg can be moved to support multiple M.2 NVMe SSD lengths including: 2280, 2260, 2242, 2230.
Multi OS Compatible
Windows 7 or above, Mac OS 10.10.5 or above, Linux, and Type C Android Phones.Blue Indicator is always on when plug in, and flash when read or write data.
Installation Instructions
1. Ｐlease slid to open and take the middel frame out of the enclosure.
2. Place the SSD at and angle of 45 degress into the PCB.
3. Insert the fixing hole at the end of the M.2 SSD into the slot in the middle of screw B, insert screw A and tighten it. Otherwise, there will be large screws preventing the installation of the enclosure.
4. Put the thermal pad on the SSD,leave the sheet on the thermal pad.
5. Inserting in the direction of the arrow,the end with the hook goes slowly slide into the shell first. When you hear a bang, it means that it is locked
Note:
１.After installed, when the first time to use the new SSD, it may not be found, please partition and format it first under disk management, then it can be used normally. If want to work on both Mac and Windows OS, please format it to EXFAT.
２. Pless kindly noted our item work well on all brands M.2 NVME PCIe 2230, 2242, 2260, 2280mm SSD up to 4TB including Intel 600p, 660p, Sumsung, WD, Crucial etc. If any question you have, please mail us, we will help you well.
３.Not compatible with MacBook original SSD．
Thank you for your notice!
According to the New USB-IF standard, the USB 3.2 specification replaces the USB3.0 USB3.1 specification and it introduced a new nomenclature, the USB 3.2 specification absorbed all prior USB 3.0/3.1 specifications, So, our 10Gbps USB C NVME SSD Enclosure, we can say USB3.1 Gen 2 or USB3.2 Gen 2(Old Nomenclature /New Nomenclature)
USB 3.2 New Nomenclature:
1. USB3.2 Gen 1 = USB3.1 Gen 1 , Product transfer rate is up to 5Gbps, Marketing name: SuperSpeed USB
2. USB3.2 Gen 2 = USB3.1 Gen 2 , Product transfer rate is up to 10Gbps, Marketing name: SuperSpeed USB 10Gbps
3. USB3.2 Gen 2X2, Product transfer rate is up to 20Gbps, Marketing name: SuperSpeed USB 20Gbps
mike mac
Reviewed in the United States on March 2, 2025
Great enclosure have 6 of them pretty solid!
Stuart Hedden
Reviewed in the United States on March 1, 2025
Works great.
Mark in NC
Reviewed in the United States on February 5, 2025
I was really struggling about how I was going to get data off my old dead computer. I had the hard drive, but some data ended up on the SSD. This solved the problem, and now I have a really sleek 256 GB storage device when I need it.
Worked perfectly
Reviewed in the United States on February 21, 2025
Worked perfect for what I needed it to do lil confusing how to screw it in but just read the instructions it’s self explanatory, would buy again if needed
AlperDosdemir
Reviewed in Turkey on February 19, 2025
Fiyatına göre çok kaliteli bir ürün.İçerisinden m2 soğutma pedi çıkması bile harika. Kasanın alüminyum olması izmir gibi yazın 40 derece üstü sıcaklarda çok işe yarayacak.2. bir ihtiyacım olursa yine bu ürünü alırım.
Veritas
Reviewed in the United States on January 5, 2025
Everything worked great out of the box - no tools needed.
Dr-Phone
Reviewed in the United States on January 21, 2025
I'm totally blind. I got this so I could use a 4TB M2M drive to back up my computer. The drive feels like a pack of gum for the most part. There is a USB C female plug on one end and a slide lever on the other end of it. I point this out being it took me a few minutes of playing with the drive to figure ou8t how to get it apart. You must press and slide the lever over and then you can press on that end of the drive to push out the center part that holds the M2M drive. Wants you have that out! You can put the M2m drive in the center part. Please make sure your hands are clean and dry! Also make sure you touch something madel to get rid of any static charge so you don't mess anything up before doing the below. You need to feel the drive and you will feel a small notch ware the pin connection is. On the other end of the drive, you will feel a whole. When feel near the center part close to the USB C connector you will feel a small raved area that is ware the pin side of the drive goes in first. Tilt it at a 45 degree angle and make sure you have the chips side of the drive facing up! Then teh M2M drive should slide into the center part easy and lay down teh drive. At this point, the screw whole in the M2m drive should line up with teh whole in the center part of the holder. Take teh two sdcrews out of the baggy that comes iwth the M2M reader being careful not to drop them being they are small! Put the small one in the underside of the center part holding it with something and then take the larger one and screw it down into the whole through the M2M drive locking it in place. Then take the heat sinc pads that come with the M2m Thumb drive holder and set them on top of the M2M chip! Placing your thumb gently on the heat Sinc pads slide the center part back into the housing. If you did things correctly! It should lock back in place. Now you should be able to plug it into yiour computer.Note! You probably need to bring up disk manager on your computer to be able to get the drive ready to go. If you are using a 4TB or lager drive! You will need to use the GPT option so you can then use all the space on the drive.Now in testing this, I was trying to copy over 1.21TB from my computer to the M2M drive. I got good transfer speed for about 20 or so minutes. Then the drive slowed way down but the copy process did continue. This was going on a USB 3.2 Gen 2 port using a 10GB cable. For the first part of the copy process! I was getting over 700MB and as high of 1.11GB per second. Then it dropped to 200-300MB per second. Like I said, it went good for about 10 to 15 minutes before slowing down.Now in saying the above! I do not know if this is do to the GPT option or not! But wanted to point it out.Other than that, I'm content with the thumb drive.
Baldi
Reviewed in Germany on August 13, 2024
Verarbeitung und Einsatz sehr gut
Zoo2007
Reviewed in the United States on July 7, 2024
The tricky part about these types of closures is heat they do get hot if they are being used constantly so you wanna make sure that we keep them cool does affect performance when they get hot but they are good value they work as well as all the other external cases out there
FlowTime
Reviewed in France on October 27, 2024
J'en ai acheté plusieurs, un nomade et un fixe pour nvidia shield, je ne suis pas déçu.La vitesse est au rendez-vous avec un samsung evo et aucune perte de données. La chaleur est parfaitement dissipée.
S. Fox
Reviewed in the United States on April 6, 2024
My Samsung 512 gb M.2 drive plugged into this case without a problem. The screw was a bit of a hassle to attach, but the drive fit the furthest hole from the connector. There was sufficient room to attach both heat transfer pads and fully close the case. I used this to remove some files from an SSD drive from a laptop that died onto a new laptop. All of my files and folders came up immediately and I had no issues transferring them. I kept the drive plugged in for about two hours and it did not get warm at all. I plan to store the drive in the case for future use, if needed. Due to previous reviews, I did not try the USB C cable. The USB A cable worked fine and data loading and transfer was immediate. As I already have a full size Crucial SSD for backups, I won't be using the M.2 for that purpose. I agree that the instructions are lacking, but there really isn't much to figure out before using this case.
WimS66
Reviewed in the Netherlands on April 15, 2024
Prima product
Txukysam
Reviewed in Spain on April 11, 2024
Es muy facil de montar con el tornillo interno incorporado. La apertura de la caja para montar el disco es muy facil e intuitiva. 100% recomendable.
Recommended Products