Your cart is empty.

Sprite Extruder Upgrade Heater Block Kit High Temperature Pro 300℃ Titanium Heatbreak Plated Copper Nozzle Compatible with Creality Ender 3 S1/Ender3 S1 Pro/CR10 Smart Pro

4.8 (8) Write Review

Free shipping on orders over $29.99

$18.04

$ 7 .99 $7.99

In Stock

1.Style:High Temp Pro 300℃

2.Qty.:

【Package include 】Plated chrome Copper & Titanium Alloy Throat Tube x1,Copper-plated heating block x1, Silicone sock x1, Nickel Copper plated nozzle x1, 0.4mm MK nozzle x 5, silicone sock x 5. (if your printing temperature is over300C, please remove the silicone sock before printing). Compatible with Ender 3 S1/Ender 3 S1 PRO/CR 10 Smart Pro.
【Bimetal Heatbreak Throat Tube 】- Using TC4 titanium alloy and copper two kinds of metal processing, titanium alloy has good thermal insulation, copper to help heat dissipation.For a long time of printing has an obvious role in improving the quality of printing.
【Nickel Copper Plated Nozzle】It has smooth inner hole and outer surface, which is more smooth and stable for material extrusion. It can be applied to all kinds of materials, such as ABS, nylon, PEEK, etc., The maximum working temperature is 500°.
【Premium Preformance】High Strength-Good comprehensive mechanical propertoes Tensile strength：1.012GPa; Highly Polished-Ra<0.4 roughness inner wall enhances the fluidity of filament.
【Customized for Sprite Extruder】This heater block is an upgrade for Creality sprite extruder, compatible with FDM 3D printers equipped with sprite extruder like Ender 3 S1, Ender 3 S1 pro, CR10 Smart pro, Sermoon V1, Sermoon V1 Pro 3D Printer.

Product Description

Sprite Extruder Upgrade Heater Block Kit High Temperature Pro 300℃ Titanium Heatbreak Plated Copper Nozzle.

Product comparison

Heating Block

Material:copper alloy

Weight:0.67lb

Maximum working temperature:500°

EDB

Reviewed in the United States on September 30, 2024

Bought a set, using the throat tube to upgrade my existing Ender 3 S1+ extruder to a higher temperature. Installation is straight forward, the throate tube fits perfectly, not too tight, not tot loose. The silicone cover also fits perfectly.

Jeffrey Catalfamo

Reviewed in the United States on November 4, 2024

The perfect party pack to try different nozzle sizes. They fit perfectly, are easy to install and a great value for the price. I have not had any clogging or print degradation in using these. Will be buying again.

kutluch

Reviewed in the United States on October 9, 2024

These nozzles got the printer working for Flexible PLA. They are exactly as described.

Reviewed in the United States on October 14, 2024

They were the right size but when I installed it, it keep jamming and I have printed a lot of parts w/o this issue. I used the needle to slide it down through the nozzle and some of them, the needle would hang up when it reached the necked down end of the inside of the nozzle.

Krissi Rafferty

Reviewed in the United States on September 5, 2023

Nice variety of sizes, good quality. I like that it comes in a small case and the tool is perfect when switching out nozzles. Would recommend and buy again.

michele

Reviewed in the United States on May 25, 2023

ACROSSXD 22 pcs 3D Printer Brass MK8 Nozzles 0.2mm, 0.4mm,0.6mm, 0.8mm, 1.0mm Nozzle with 3D Printer Tools and a Ten-Grid Parts Storage Box for Ender 3 Series/CR-10First impressions: I like the different sizes of the nozzles. I’m new to 3d printing so I don’t know what I’ll need so I like having a choice. The nozzles are made of brass and seem well made with a few extra of the most commonly used.Installation/setup: Use to replace parts on your 3d printer.Final thoughts: I got this because my second hand Ender 3 pro’s printer nozzle was worn when I got it. That may have been the reason they got rid of it lol. I used one of these to replace it with the same size and it’s working well through my test prints. I like this and I’m glad I got it.⭐️1 star - I don't recommend it at all, poor quality.⭐️⭐️ 2 stars - I don't recommend it, it has multiple faults, or a very high price.⭐️⭐️⭐️ 3 stars - It's passable, It has some faults but the quality is ok for what it is.⭐️⭐️⭐️⭐️ 4 stars - Product quite acceptable, it does what it promises.⭐️⭐️⭐️⭐️⭐️ 5 stars - Product that I totally recommend.

Zero

Reviewed in the United States on March 16, 2023

I like the nozzle tool since it holds well and is long enough that the heat from the nozzle takes a while to get to finger depth so no gloves are needed. Be sure to lift your Z axis away from the bed enough for clearance. I'm used to a stubby ratchet but this L shaped tool works better.The nozzles are great. I love the selection. They are marked but after a while it's pretty easy to tell a .4 from a .6. I used a pTouch and put labels on the sections to identify the nozzles. I've also added my random loose nozzles from everywhere to this box for the betterment of everything.I broke one of the stabby things trying to unclog some silk that I ran too cold. I don't blame the needle as there's a balance between brittle and bendy and I think these are just right. They stab pretty well too and don't really hurt.I haven't tried the 1.0 nozzle yet but the .6mm is my new favorite. I tried the .8 in vase mode and got excellent result on my ender.

Brandon Lanham

Reviewed in the United States on December 12, 2023

"The MK8 Nozzles set is a comprehensive kit for 3D printing enthusiasts! With a variety of sizes including 0.2mm, 0.4mm, 0.6mm, 0.8mm, and 1.0mm, it offers versatility for different printing needs. The inclusion of DIY tools and a metal storage box adds convenience and organization to your 3D printing setup. A must-have for those who love to fine-tune their printing projects."