Your cart is empty.
Your cart is empty.***Upgraded PT1000 thermal sensor***Max Printing temperature 350°C What's in the package: 1* Rapido HF PLUS Hotend 1* 0.4mm 1.75mm hardened steel nozzle 1*0.4mm 1.75mm Plated copper nozzle The hotends are compatible with all thermoplastic filaments including but not limited to typical fibre composite filaments such as PLA, ABS, PETG, TPU, PP, PA and PLA-C, ABS-CF, PETG-CF, PA-CF /GF, as well as composite filaments such as steel, wood, boron carbide, tungsten and fluorescence.
BSH87
Reviewed in the United States on January 5, 2025
This item is the older version and is the same price as the new v2. When I purchased this item I didn’t see or know the difference at the time or I would have waited to get the newer style since it’s a better unit.
Steven Lewis
Reviewed in the United States on September 22, 2024
I love this thing. I had read an article about boosting an Ender 3 to 1000 m/s and the first step was to boost volumetric flow. This hotend was recommended as a part of that process. It works very well, but being a V6 in order to install it to an Ender 3 you will need a V6 mount, which the article failed to mention. Additionally, if you wish to attach a 3D printed fan duct, you will need to make sure it fits a V6 hot end.
metalb00
Reviewed in the United States on February 17, 2024
The media could not be loaded.
Riaan
Reviewed in the United States on July 12, 2023
Great brand!
Zahid Manzar
Reviewed in the United States on October 26, 2023
Understandable not a seller fault, the Rapido UHF came working as intended and was simple to install. All accessories were included too.The problem lies within the heater, I was PID tuning the hotend for the install and the ceramic heater core failed open. The resistance shot up to 300 MOmhs which sounds the ceramic failed when heating up for the first time. Verified that my system was 24V and could supply adequate power, simply stopped heating after 2 minutes of use. Now I am well outside the return window due to waiting for parts to ship internationally that were required for the install and down another $50 in replacement parts.I don’t see a way to contact the seller regarding the issue, hence the low rating. But I will re-assess the rating given overall customer experience if they are willing to work with me regarding the problem.Flawed product, nothing wrong with the seller so far. Rapido 2.0 solves this issue so go for that instead.
Mark
Reviewed in the United States on January 19, 2023
1 star due to the genius who decided to put thick ptfe tubing over the connections and wire. Then for extra measure used a heat gun to shrink it. The new gouges in my fingers are so thankful. You literally have no choice but to risk cutting a wire to get this off. Also, include hardware for mounting this? You couldn’t just make the holes m3, the screws everyone has. Oh no let’s do 2.5 and then not send them any. Sad.The hotend itself is great.
Customer
Reviewed in the United States on May 20, 2022
Very good seller and the product is amazing it prints amazing quality at high speeds. Had many issues with other cheaper model that get clogged instantly when printing pla but this hot end handles all filaments amazing.
Alex
Reviewed in Canada on November 22, 2022
The hotend heat really fast and the filament flow is really good. At first I was using a regular extruder and had clogging issues. I decided to change to a dual gear extruder and everything work like a charm.The downside is, the first time I've disassembled the hotend to unclog, one of the three small screw broke in the socket. The other two are okay but this one is stuck there and I can either replace it (can't find these type of screw) nor remove it since it's kind of deep in the screw socket.I've printed since with only two screw attached. For small print, everything is fine... but for higher print, there is over-extrusion on the side opposite to the missing screw. It's seems that I can't equally adjust this section of the hotend and create a small angle that cause this problem.Anyone have any idea how I can replace/fix this part?
PeteK
Reviewed in the United States on November 18, 2022
Awesome hotend used on my Voron 2.4r2 300x300 with Stealthburner. I opted not to get the UHF Ultra Hiflow because it's longer and puts the nozzle too far below the fan ducts. This works with the official Voron Rapido Stealburner mount without modification. The connectors did not match the ones on my build (Formbot Kit w/ Dragon HF) so I had to cut, crimp and replace with ones that works. Of course your mileage will vary but if you built you printer with a Formbot kit... be aware that it's not just plug in and go. I've been running this with a Diamondback .4mm nozzle. Now flow issues printing at speeds up to 300mm/s but mostly I print around 150mm/s.
Recommended Products
