I purchased this because there really isn't a pouch for inline cordless screwdrivers. This did not disappoint! I loved how the tool slipped on my pants or tool belt and the tool was secured from falling. Much better than my old drill holder on my tool belt. I can definitely recommend this!

Doesn't fit without a little coaxing on my m12, but got it and is working great.

I HAVE FULL SIZE DRILL HOLSTER & A COMPACT HOLSTER FOR IMPACT DRIVER FROM TOUGH BUILT BUT THIS LIGHTWEIGHT INNOVATIVE DESIGN THAT SECURELY CLIPS ONTO ANY BELT & LOCKS UR TOOL IN PLACE IS GENIUS. U COMPROMISE PROTECTION FOR UR TOOL FROM SCRATCHES & DINGS BUT THE TRADEOFF IS LIGHTWEIGHT, MODULAR & EASE OF ACCESS. GREAT DESIGN, CHECK ONE OUT. IF U NEED AN ARRESTING LANYARD BUY THE KIT THAT HAS THE HOLSTER, LANYARD, PINS & SOME OTHER USEFUL & UNIQUE ACCESSORIES ALL IN ONE PACKAGE.

Very sturdy and easy to use!

This is perfect for my screw gun on my tool belt.With a traditional holster my screw gun would occasionally fall out, however with a spider holster it stays in place!

Had a few of these over the years but be aware over time the end finds it self wearing away and falls out of the holster so if your working at height you will drop what ever it is attached to and could possibly loose the peice of equipment and be out of pocket

I'm an Appliance and Refrigeration Technician, and respond to service calls all day long. I use a backpack to carry all my tools into customer's houses, and there's no room for my Milwaukee M18 Impact Driver. Until now, I've hung it off one of the handles of the backpack using a velcro strap and carabiner rig. This not only made my already heavy backpack even heavier, but my drill was flopping and banging around. I figured I would try the Spider, but didn't have very high hopes... mainly because the belt clip that comes with the driver was always loose and falling off, and I expected the same with the Spider. I figured the little doo-dad would get loose and fall off the driver. The screw they give you to secure the doo-dad tighens it perfectly to the driver. And the driver hangs securely enough to your belt that it doesn't get damaged, while still controlling it so that it isn't flopping around. Everything is made tough, but light. The belt clip is heavy duty and the receiver locks and releases easily each time you use it. The best part is the price. I would've paid double for this thing, now that I know how important it has become in my work day. Highly recommend!

The drill set i purchased didn't come with a belt clip or a place to put one on, so this clip setup came in very handy. And it came with enough stuff to setup both of my drills. Good price, good quality, fast shipping. And the extra bit holders that came with it worked great. The tape used is very strong and isn't going to come loose for quite a while.

Sick to death of my screw gun digging me in the leg as I walked about or climbed a ladder with it hanging from the hammer loop of my tool belt, I just had to find another option. Holster? Nope, too much of a pain to stow and release one handed as I work off a ladder, especially as you’d need to re-buckle it every time to ensure tool security. Holsters are pretty cumbersome to have on your belt too. Often, even with the belt pulled so tight I could barely breath, it would still start to creep down around my arse and just be uncomfortable to climb with.I made the decision that I wanted my screw gun up near my abdomen to keep it out of the way. Only way to do that was with a vest. Didn’t like the Snickers one because I couldn’t see a way of securing my screw gun in the place I wanted it, so in the end I opted for a police/military style Molle vest with multiple loops. Looks ridiculous I know but I just don’t care, with hindsight I’d have gone for black though.Got my vest, now…how to attach my screw gun? Tried a rhino hook thing but the trigger would operate when I dropped the gun in, plus it stuck out too far. So more googling led me to Spidertools. HOW BLOODY MUCH??!!Yep, they are crazy expensive but they are worth every penny.I feel a warm glow every time I grab and re-stow my tool. Though that may just be from the embarrassment of looking like a wannabe copper climbing a ladder. Oh well, it works! They lock every time you stow the tool and they’re easy to get the hang of releasing one handed. It’s a bit of a faff putting the lug onto your tool and I was convinced it would make holding the tool uncomfortable but you don’t even notice it’s there. Brilliant design that just works.

This has been - by far - my favorite method of carrying my tools around while on a job. It's SOOO quick and easy to take the tool on and off my belt with this.I bought the "Quad" kit, and I've used most of it. In fact, I've found that most days I just slide the clip onto my belt just in case I need to grab my impact driver at some point during the day. I know that seems a little crazy but it's quarantine we're all crazy now.I've hand no trouble sliding my tools in and out of the clip. And when I'm moving around a ton it's nice to know that the lock will keep the tool in place. I've never had it slip out on me, like I have with other tool holders.The bit holders I initially viewed as a silly throw-in, and now they might be my favorite part of the kit. I absolutely LOVE these things. I put two of them on my DeWalt impact driver and I have all six slots loaded at all times with the 6 bits that I use the most often.I gave this system 5 stars and I stand by it. That doesn't mean there aren't things I dislike though. They just aren't enough to keep me from absolutely loving this system. But here they are anyway:- the "open" mechanism simply doesn't stay in place. There's a lever you lift up to release the tool, and if you pull it all the way up it supposedly sticks there and now you can take a tool on and off and it won't be locked in place. I like this feature for the times when I'm doing something where I need my drill in rapid succession. I also like it for times when I'm purely taking measurements and I want to be able to quickly take a tape measure on and off the clip. But the mechanism locks back down SUPER easily so that feature is essentially worthless. Hopefully they'll fix that in the future. I wouldn't even mind having a clip with no lock at all (they could make it a different color to keep track or something).- the bit holders - which I adore - are billed as being able to hold up to 6 bits in each unit as long as they're the stubby kind that you put into an extension bit. Yes, this is technically possible and I did it for a while, but I found that those bits fall out much too easily. Now I only keep full-sized bits in those sleeves so they fit 3 in each unit. I just put two of them on one drill and then I have six bits again :)- while I like the design, I will say that the tools get a little wobbly on you, and rotate into awkward positions. If there's a bit in your drill, sometimes that ends up poking you a little. It's not the end of the world, but a minor annoyance.- I've put the straps on heavier tools, but naturally I've found there's a limit. Frankly, this isn't for anything much heavier than a hammer drill. I have the straps on my drill, driver, and a cable stapler I use, and that last one is the heaviest I go. I tried it on a cordless brad nailer once and it was way too heavy for my belt and pants to hold up comfortably.That's it! I love this system and strongly recommend it.

Ich habe etwas gesucht um meine Akku Hand kettensäge immer griffbereit zu haben, wenn ich im Garten Rückschnitt mache.Top Produkt für meine Zwecke!

Kaufen und glücklich sein! Nicht mehr wegzudenken. Schnell umgeschnallt und los gehts. Gerade als Dachdecker perfekt. Ob an der Schieferschere, am Maßband oder am Akkuschrauber. Arbeitskollegen steht der Neid im Gesicht. Am besten gleich das große Paket kaufen. Weil die klebepads in kombination mit einer zusätzlichen Schraube zur Befestigung es gerade nützlich machen. Loch ist im Pad schon dafür eingelassen. Klare Kaufempfehlung 🤪