Shopping Cart

Your cart is empty.

Your cart is empty.

SpeTool 30 Degree V Groove Router Bit with Tiain Coated1/4 Inch Shank, 4-Flute Carbide Chamfer End Mill Carbide V Bit for CNC Engraving and Chamfering Lettering

4.5 (13) Write Review
Free shipping on orders over $29.99

$14.99

$ 7 .99 $7.99

In Stock

1.:45 Degree


2.NumberofItems:5


About this item

  • SPECIFICATION: 30degree, 1/4" shank, 2" overall length, can be used in routers with 1/4" collect;
  • 4 FLUTE V-BIT: 4 Flutes Designed Chamfer V Bits to make cutting more efficiently and clean surface. Suitable for high-speed cutting and harder materials.
  • APPLICABLE MATERIALS: SpeTool Solid Carbide V Bit With Tiain Coated tip, suitable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.
  • WIDE APPLICATION: Perfect for CNC routing, Woodworkers, including hobbyists and professionals, router V bits for tasks such as sign making, engraving, lettering and carving.
  • DURABLE AND PRECISE: SpeTool CNC Router Bits for V grooving, high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
  • SPETOOL SERVICE: V Groove Router Bits Good quality, cost-effective, efficient after-sales service, etc.


Product Description

tekton over firefighter flush trim dremel biscuit joiner bosch capri zopeal freud surfacing marking

V Groove CNC Router Bit

SpeTool V Bit Series

SpeTool specialized in manufacturing various V BIT tools including 4 Flute V Bit, 3 Flute V Bit, 2 Flute V Bit, Flat Top V bit and other woodworker tools; TAC coated, ZrN Coated,Titan Coated, Carbide Tip V Bit for professional and starter user.

SpeTool Detail Carving/Engraving Router V Bit Show Here

The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.

  • If new to woodworking router bit field, we recommend you purchase 2 flute router bit. If you are a professional/skilled woodworker/ enthusiast, carbide insert bit will save your cost.

  • The Chamfer End Mill is made of Premium carbide with high hardness and high wear resistant for the longest life and best finish on hard material.

  • If you choose 45 degree or 60 degree Carbide Insert V Bit, the general insert is B0C6XHCV52; If choose 90 degree Carbide Insert V Bit, The repacable insert is B08V8PWL6S.

  • Feed Rate (IPM) = RPM x # of cutting edges x Chip Load

    Chip Load = per cutting edge. IPS = Inches Per Second. IPM = Inches Per Minute. RPM = Revolutions Per Minute.

    # of cutting edges = # of flutes.*


Aaron Lamson
Reviewed in the United States on February 8, 2025
I bought these after I had another brand break on me. I had no issues with these on gnocchi boards. I made 20 or so boards (each with 15ish cuts) and it cut like a champ. If I made more boards I would use a brand new one because it felt like it was dulling towards the end (still cut decently though). To make sure the tip does not snap off, go very slow and controlled at the start. Once the cut is started, you can speed up quite a bitCant beat the price and the tip stayed strong unlike the other brand I bought
Cooler carts
Reviewed in the United States on February 18, 2025
just as good as any other
Randall Reyes
Reviewed in the United States on January 7, 2025
Inexpensive, durable, good quality.
The Computer Edge
Reviewed in Canada on July 20, 2024
I generally use SpeTool bits. They are affordable and long lasting.
615M&F
Reviewed in the United States on November 13, 2024
Been using this little guy on mild steel and aluminum. Leaves a nice chamfer every time!
Xillixio
Reviewed in the United States on October 26, 2024
Used moderately, cuts well but doesn't cut clean engravings in acrylic
Bandit Designs
Reviewed in Canada on January 19, 2024
What can I say cuts great
F. Mack
Reviewed in the United States on April 15, 2024
na
Aaron
Reviewed in the United States on July 15, 2023
This is my all time favorite vbit and for the price you can’t beat it. I like that it has 4 flutes and cuts super clean.
Bernd Seydel
Reviewed in Germany on April 9, 2023
Hohe Standzeit. Nutze ihn zweifach, zum Fasen fräsen und als Gravurfräser zum Sauberen anschneiden der MPX Deckschicht. Mit normalen fräsern splittert die Deckschicht von MPX meist großflächiger, als die zuletzt angefräste Fase. Fräst man die Werkstückkontur zuerst als Gravur mit diesem Fräser und so tief, wie man die Fase haben will, hat man Splitterschutz und Fase in einem Arbeitsgang realisiert und eine sauber Kante.
Jeffrey Sgrignoli
Reviewed in the United States on December 26, 2022
This bit is good for doing all v carving on a desktop cnc router. Sharp and leaves a good edge when done milling.
MiKE
Reviewed in Canada on April 28, 2022
Quality materials and cuts wellWorks well for my needs
Karsten Geißler
Reviewed in Germany on June 12, 2021
Hält was er verspricht