Your cart is empty.
Your cart is empty.Product Description
VALISY Ball-bearing Self/Soft Closing Drawer Slides
- Material: Cold Rolled Steel with zinc plated finish, rust-proof.
- Thickness: 10 mm.
- Load capacity: 110LBS high load-bearing fits for multiple types of drawer.
- Installation: Side-mounted.
- Package: drawer slides, Mounting screws and manual included.
- Note: Mounting brackets NOT included.
- Damping-Hydraulic-Cylinder then provide a buffer force when the rail is nearly back in place.
- Drawer finally close softly.
- Strong restoration springDamping Hydraulic Cylinder
- Drawer close automatically, saving effort.
- No concern about pinching your hand.
- Damping-Trigger activate the system when touched by the sliding rail.
- Triggered Double-Spring then pull the rail back.
- Triggered Double-Spring then pull the rail back.
- Make your drawers slide smoother for lifetime.
- Multiple fixed hole positions for easy adjustment.
- Allow for full-extension.
- Maximizes the use of drawer space and improves space utilization.
- Measure the depth of the drawer.
- If length is not even, please choose 1 inch shorter.
- The length of slides can't be longer than the cabinet case depth.
- 2-Row of Solid stainless steel balls in the ball positioning groove, not easy to derail.
- Snap-on design for quickly separating the third track when installation and effortlessly pull the entire drawer out for cleaning task.
kmadison
Reviewed in the United States on June 2, 2024
Outstanding value.Easy to install and works great.
Customer
Reviewed in the United States on November 22, 2024
Functions great!
B
Reviewed in the United States on February 22, 2022
Was looking for a solid drawer slide that wouldn't break the bank. Would have loved to install the top of the line name brand slides but these fit the budget much better and seem to work very well. This type of slide is touchy to install properly as the drawers need to be square and the slides need to have the correct clearance on each side of the drawer, these are no different than any other slide of this type in that regard. They are a good value for the money and operate very well, they lock closed slightly and have just a little drag going in and out which I think is correct operation of a drawer slide. Would not hesitate to use these again.
Rich
Reviewed in the United States on April 15, 2021
My harbor freight tool cart large drawer slides were worn out, box was still good so I didn't want to go buy another one and I didn't want to order just slides from harbor freight as all their repair/replacement parts come from china and take many weeks to show up, so purchased these slides, these slides worked perfectly. Tool cart drawer slides in and out just like new.
Art
Reviewed in the United States on September 21, 2020
So, I'm building a small cabinet to sit under my drill press, and it has two drawers. I used two pair of the twelve inch slides to mount the drawers. Installation was a breeze, and the drawers slide very smoothly and "lock" into place when closed. The drawers open with a gentle tug and then a smooth slide - these slides work great!
Curious George
Reviewed in the United States on July 4, 2020
UPDATE (7/11/2020): It’s been a week since I corresponded with the seller about the not packaging enough screws. The seller was quick to respond and asked for my mailing address indicating that the replacement screws would be sent with a tracking number as soon as the warehouse sends it to him/her. As of today, I have no messages or any indication that anything was sent. I would recommend the drawer slides still as they are a great value. However, plan on buying extra screws if you want to install all 6 pairs.——————————————————————The drawers are decent. I have had no problems with the stiffness nor the bearing falling out during installation. I think people tend to jam the drawers with too much force when they first install and push the drawers in. The slide is made up of three sections: 1) the back side which gets mounted to the cabinet; 2) the middle slide that glides within the back side; and 3) the front slide that glides from the middle slide to allow the full extension. The trick is to pull the middle slide toward the front so it becomes flush with the front slide. Then push the entire drawer back in. My only gripe is that the seller does not include enough screws for the complete installation. You need at least 12 screws per pair of slides that holds the drawer (6 to mount to each side of the cabinet and 3 per side of the drawer). I was able to do a complete installation of 5 drawers (using 5 pairs of slides), but afterwards, was left with only 6 screws to install the last drawer. I've contacted the seller to see if they could ship me some more screws.
LBHighland
Reviewed in the United States on March 12, 2020
Great product!I recently bought a piece of furniture, and had one of the original slides go bad on me.This was an Easy replacement.Ps I’m a nurse not a handyman.Once I removed the old slide, I penciled-in a line down the middle of the original screw slots.Then, using a flashlight lined up the screw-holes of the NEW slide with the pencil line I drew.Then marked, and pre-drilled.Lastly, screwed to bottom into place.First try, got it!This product is very well balanced for an oversized chest of drawers.I am considering replacing all of the drawer slides with this particular product.
Matt Troyer
Reviewed in the United States on January 22, 2020
I was surprised by the quality, smoothness and heft of these drawer slides. Much nicer than the ones I recently purchased from the local big box store.One tip for DIYers, when you install them on the cabinet side, use the tabbed mounting holes. This way the slides self-adjust if your fit is off my a millimeter or two.
Recommended Products