Your cart is empty.
Your cart is empty.Shane S
Reviewed in the United States on March 9, 2025
The external battery pack is great, no tiny short lived expensive batteries needed.
Alexandre Velite
Reviewed in France on June 30, 2024
Rien de spécial, la cartouche laser fait le taf de préréglage à 10-15m. Néanmoins le pont laser est déjà très difficile à voir à 25m, est invisible sur 50m avec la lumière du jour. Autrement, pour une carabine à levier sous garde il est très truqué de l'introduire cette cartouche et pas simple de la sortir, car elle plus longue que la vraie 22LR. Pas de problème pour une carabine à verrou, ça passe nickel, au pire il faut juste sortir la culasse. Le fil électrique est très fine et fragile. Il faut y faire attention.
sai-john
Reviewed in Canada on December 27, 2024
Excellent quality. I used it for pistol and rifle sight alignment. Easy to use. Bright red dot.
Andrew
Reviewed in the United States on October 3, 2024
Excellent works great.
Matt R.
Reviewed in the United States on October 2, 2023
I tried the magnetic kind that go outside the bore, (don't bother wasting your time on that! They scratch your gun, overpriced, and inaccurate). This product however works great, it is plug and play. It does seem to aim high, but I don't know if it's due to bullet drop or physics. Aside from that, side to side it is centered, and I like that you can turn it on and off by the switch. I would have liked to have had a thicker cable, but I haven't had any issues. I tried cheap laser sighters, I tried really expensive laser sighters, and they all failed terribly. This is the one that was just right in terms of consistency and functionality. I wish I'd tried it first, it would have saved me a lot of time and effort!
Barrygarrett
Reviewed in the United States on October 31, 2021
the small bore of the 22 makes it a challenge to get the laser in and out of the gun but this was expected ... a small pair of needle nose pliers or needle drivers (roach clips) would do the trick. Be mindful of the wire coming from the battery to the laser is small and fragile. great product works well. Sighted my scope at night with the red laser no problems...a little harder to see in daylite. good luck
Race F.
Reviewed in Germany on January 8, 2020
An sich ganz okay. Nur war die Genauigkeit beim einstellen etwas abweichend. Und bei Tag auch auf 25m Entfernung sehr schwer zu erkennen. Was etwas nervt ist die Box mit der Batterie. Sie hängt die ganze Zeit am Kabel an der Waffe herunter. Aber das geht bei diesem kleinen Kaliber ja nicht anders. Also ist dies kein richtiger Kritikpunkt.
devildog
Reviewed in the United States on July 2, 2019
Awesome little thing. Far better than laser bore rods that slide down the barrel. Just slide this into the barrel as you were putting a single round in the chamber to fire. SLOWLY slide the bolt forward to snug it in the chamber and being CAREFUL of the attached small wire that powers the laser. I did this at night because the laser is a LOT easier to see in the dark. Adjusted my scope on the new Ruger 10/22 I got for my daughter. Put the crosshairs directly on the laser dot that was at about 50 yards away. Next morning, out to the range and the very first shot out of this new gun was less than 2 inches off my aiming point. Seconds later after adjusting the scope one more time, the next round was right on. Saves time and ammo. We had a blast. Highly recomended.
Matthew Ackerman
Reviewed in the United States on February 15, 2019
So this thing is a great idea in concept. Was looking forward to zeroing my new scope before wasting a box of ammo trying to even get the thing on paper. Unfortunately it's kind of a poor execution in practice. Firstly it's very difficult in my semi auto rifle to get this into the barrel. It just BARELY fits and I have to use a pair of hemostats to get it lined up. Secondly it has a ridge on it that doesn't sit exactly flush with the end of barrel. So I installed it and then I get a fuzzy half moon shaped light coming out the other end. I have to lock the action back, and then fiddle around with it until I get a solid laser dot. VERY carefully don't move anything and then zero the scope to the dot. I was hoping this laser would load like a bullet and sit snug in the barrel. That is just not the case. I have seriously considered returning it, but unfortunately I don't see anything that is much better of an option. I can't bore site the gun as I can't see down the barrel with the action removed. Just the way my gun is designed. So I give it three stars. It sort of works but it's not exactly what I expecting. It's very fiddly and hard to install and remove. It has to be aligned just so for it to actually project a solid dot through the barrel of the gun.
Mr. M. Lazzeri
Reviewed in Canada on December 5, 2018
Works as expected. Boresighted my .22s with this. Did the job. Laser is strong enough for bore sighting. The connection wire from the battery pack is thin, it has to be handled gently. A gentle tap with a finger and the brass laser holder will stay in the chamber.
ulderico montanari
Reviewed in Italy on September 25, 2017
Spedizione amazon come sempre conforme agli standard. Boresight SM39021 semplice e pratico da usare consente precisa taratura sia per pistola che carabina il prezzo ritengo sia elevato ma attualmente no si trova niente di meglio qualità 4* prezzo 2*. Comunque fa quello che deve fare
don't have a witty username
Reviewed in the United States on March 31, 2015
Is simple to use and protect the wire. This works for any laser boresighter whether it has a wire or not. Cut a small bit of cloth rag. I used an 8" x 6" piece of a pair of athletic shorts. For larger caliber & wireless sighters a much larger rag can be used. Lock the bolt back. Put the sighter in thru the ejection port. Roll the rag & push it up thru the mag well. For wireless sighters you can jam the rag in through the ejection port. Slowly (very slowly) let the bolt compress rag against the the sighter. Push the rag toward the far wall of the receiver so that it doesn't stress the wire but securely holds the sighter in the chamber. (This step doesn't apply to non-wire sighters.) I wasn't impressed with the storage case - I think it is it too small and will stress the wire to use it. (But it is a good size to put other wireless cartridge type sighters in.) I very carefully opened the package so I could store the sighter in the clear plastic it was packed in (with the sighter appendage part removed).
LoLo
Reviewed in the United States on April 2, 2015
This little boresight is awesome! You have to take your time and be patient. I placed it in my Savage Arms to sight in my scope and it is a little difficult to get in and out of the chamber, but patience is a virtue. Once I got it in and placed the laser on the bulls eye at 25 yards, sighting in my scope was a breeze. I used it to sight in my new Nikon P-RIMFIRE BDC 150 reticle scope and had it sighted in at 25 yards in 2 shots and less than 10 minutes. I spent more time putting the boresight in and removing it than I did sighting in the scope. The laser is bright and easy to see at 25 yards. I will be using this to sight in another Nikon scope on my Ruger 10/22. Well worth the $, and although I have not used the mini boresight that looks like a thermometer, I can say that this type seems easier and more accurate to me if you just need a boresight for .22 LR or .22WMR. I like it. You have to be careful not to pull on the cord or slam it in the action when placing it in and taking it out but like I said, "with patience", it works great.
Recommended Products
