Your cart is empty.
Your cart is empty.Product Description
COOL LOOKING
Classic Japanese Braided Pattern and vivid dragon pattern, unique and cool design, upgrade your car interior appearance. Perfect for those who are ready to hit the track or those who want to style out with their show cars!
Durable aluminum base
Classic Japanese braided pattern
Clear and exquisite design
EASY TO INSTALL
1.Remove the original shift knob, fit the sleeve and put the spring in.
2.Install the shifting knob, (If the length is not enough, install the adapter to the bottom of the shift knob) then adjust the angle, and screw the below screws.
3.Press the shift knob down and fit the sleeve,then tighten the upper screws
4.Finish!
THREE LENGTHS ARE OPTIONAL
Length :100MM,about 0.38kg
Length :150MM ,about 0.41kg
Length :260MM,about 0.45kg
The proper length and the proper weight allow you to feel a very smooth shift and also there’s no added stress on the gear shift.
Package Include：
1 x Shift Knob + 1 x Sleeve + 1 x Spring + 1 x Wrench+ 3 x Adapter + 1 x Set of screw kit + 1 x Demolition rod
eric pollard
Reviewed in the United States on January 18, 2025
No clear instructions
Lui T.
Reviewed in Australia on November 3, 2024
The media could not be loaded.
Donavyn Murchison
Reviewed in the United States on January 25, 2024
The media could not be loaded.
Chili Davis
Reviewed in the United States on June 7, 2023
Pretty straight forward I didn't have directions and had to play around with the different size spacers in 04 g35 sedan automatic, turns out don't need the spacers. Note that when installing be sure to set the metal sleeve that goes over gear shifter and holds it all in place is tightened down while you have katana pressed down/in to shift and be at the lowest point in transmission for me that was in D then press and hold katana down like shifting out of park to reverse while pressed you will need to put screws through side 2 holes that have longer cut outs to allow for the spring action to pop when in different gears additional set of hands will help immensely... hope this helps
Nick L.
Reviewed in Canada on March 13, 2023
Only took 25 minutes to install, faster if I knew how from the start lolEdit: it's been over 6 months and the product is still functioning properly with no cons.
Paolo Nautan
Reviewed in the United States on February 2, 2023
the item was easy to install on my automatic Mazda 3 and it works like a charm. The only complaint is that there is still a bit of "play" from the provided metal harness to the shift. The harness itself is snug fitting but u can wiggle the Katana still a bit around. Also despite the looks it feels really plastic, but thats to be expected. Overall it does what it claims to do and at a good price.
カスタマー
Reviewed in Japan on December 22, 2022
説明書はありませんでしたがそんなに難しいものではないのですぐに取り付け出来ました。軽トラのatに乗られてる方はほぼ適合すると思われます。きちんとキーも抜けるので良かったです
Brad
Reviewed in the United States on November 17, 2022
It looks really cool and works just fine as a shift knob but after some use it constantly needs to be retightened. Also it didn't really come with clear installation instructions so it took a while for me to figure out as this was my first time doing something like this.
R. Shackleford
Reviewed in the United States on June 22, 2021
Looks pretty good, install was easy, doesn’t come with any instructions but from looking at other pictures from reviews and some videos on the YouTubes it was pretty easy to assemble, took me about 20min. I was a little skeptical as to if it would fit in my 2012 HONDA ACCORD, and it did fit pretty well but me personally wasn’t a huge fan of how it looked connected to the shifter with the exposed silver and such so the same day I ordered a leather gear shifter boot also off of Amazon for $13 and tucked it into the trim and I think it really completes the look and is so much better. I love it
Ryan Chandler
Reviewed in the United States on May 18, 2021
So first off, this is a great product it both looks and feels great in my car, (2021 Toyota Corolla SE Nightshade). I have used other shifter knobs before, and I can honestly say that this one is built better, it has 8 total screws securing the base, as opposed to my others which had 3-4. But before you buy this, make sure that the size will fit, my shifter is slightly angled forward, and the top of the handle is very close to the area with the stereo. Now onto how to install it, it is not super difficult, but there are no instructions that come with it, so this is for anyone who needs a little help.1.) once you have removed your stock shifter knob, grab the largest of the black screws from the bag, and just twist them into the holes on the lower half of the black part with the 8 holes on it.2.)place that over your shift rod, and tighten them equally and I cannot stress this enough tightly.3.)place the spring inside of the black piece around your shift rod.4.)The big silver screws go into the bottom of the handle, you need to experiment and find out which one is going to work best for your car. 4a.) you need to adjust the silver screw so that handle is able to be pressed down so that the four screw holes on the side line up with the slit on the side, and make sure that silver screw is just resting on top of your shift lock button thingy5.) once you have that lined up, its a little tricky, but you have to screw in the screws through the slit on the side, and into the holes on the side of the handle, make sure you use the screws with the pointed ends for this.6.) just to be safe go back over and make sure everything is as tight as it can be, and doesn't jiggle or turn when you grip it
Cal
Reviewed in the United States on August 6, 2020
Great product and definitely worth the purchase! Took me a while to figure it out. Wish it came with instructions! Use 8 screws at the bottom of the base of ur shifter pole. Tighten evenly on each side so base is secure and even. The bolt didnt fit inside the hole on shifter pole so i used a pointy screw to stab against where the hole in shifter lined up.Insert spring.This was the tricky part for me, the plastic piece that pushes down the button was too long on mine . i had to use the short screw attachment inside the handle all the way and then i had to do maybe a quarter turn back. Its tricky i actually took that plastic piece and rubbed it on the pavement until it was sanded down enough. If it wasnt placed just right/ in line it either wont go down far enough to shift or its not up high enough to remove key from ignition.. I would recommend not screwing in both sides of the screw on top. Just get it to fall close enough in line that you can smoothly put in one screw and test it. Than once you figure it out put the screw in the other side and tighten it all down. Should be good to go. This shifter fixed the issue i had with my old shifter. Should work for any car with push button. Hope you dont struggle as much as i did. Great buy.Sorry i shoulda made a video(Edit:)After a while with the shifter the more i used it the less the screw on the inside wanted to stay perfect where i needed it so i just tightened the 2 screws i had in the handle so they locked the little plastic piece into the handle which is better than how i had it originally. Only down side haha is when im moving too quick like if i slam my car into park the spring will launch the handle out because i just have it set in loose. But it slides right back into place easily and everything is very sturdy/well made. Not positive how long ive had it but i still love it! Great purchase, looks good, and functions great. I hope this helps someone.WORTH BUYING 100%Another side note, eventually the plastic peice I had ended up breaking so I ended up taking my grinder and cut off a piece from the end of a drill it I had laying around to use to push the button in order to shift. (should be able to use anything that will fit in the hole)
Recommended Products