Shopping Cart

Your cart is empty.

Your cart is empty.

Rockford Fosgate P1T-S Punch 1' Tweeter Kit (Pair)

Free shipping on orders over $29.99

$89.99

$ 41 .99 $41.99

In Stock

1.:Tweeter Kit


2.ProductPackaging:Standard Packaging


About this item

  • The Punch P1T-S is a 1” PEI dome tweeter kit allows you to easily add on additional highs with natural sound reproduction
  • The P1T-S 4-Ohm black tweeters come as a pair, have a power handling of 60 Watts RMS/120 Watts Max and include cool looking outboard crossovers, and 3 mounting bezels to accommodate various installations
  • Recessed tweeter mount uses standard 1-3/4" hole saw and can be installed for flush, surface and angle configurations
  • High-Pass Crossover (HP): 3.5KHz @ 12dB/octave Butterworth
  • Famous Rockford Fosgate build quality with a full 1-year warranty


Product Description

Since day one, we have spearheaded the car audio revolution. Nothing has changed. Rockford Fosgate is still the global leader in audio innovation and your passion is our purpose. We engineer the best audio systems for your lifestyle!

Amazon.com

Car audio fanatics will love the Punch series tweeter kit. It features a 1" (25mm) PEI dome, cool-looking outboard crossover, and three mounting bezels to accomodate various installations.

The Rockford Fosgate Prime Series

A new generation of performance geared toward the "novice" car audio enthusiast, the Prime series full-range and component speakers feature legendary Rockford Fosgate sound quality while fitting into any budget.

R1T-S Features

  • One-inch PEI dome tweeters
  • Butyl rubber surround
  • Recessed tweeter mount uses standard 1-3/4" hole saw
  • Multiple mounding configurations: flush-surface-angle
  • External high-pass crossovers (3.5KHz @ 12dB/octave Butterworth)

    DDC Tweeter Mounting
    Rockford's DDC (Discreet Dual Clamp) Tweeter Mounting provides concentric clamping pressure around the perimeter of the mounting hole. This results in maximimum ease of installation.

    Car audio fanatics will love the Punch series tweeter kit.
    .

    R1T-S Specifications

    Configuration: Tweeter Kit Midrange Diameter: n/a Midrange Depth: n/a Tweeter Diameter: 1.0" (25mm) Tweeter Depth: 0.50" (13mm) Frequency Response: 3.5kHz - 22kHz Power Handling: 60 Watts RMS�
    120 Watts Max
    Crossover: High-Pass (HP): 3.5KHz @ 12dB/octave Butterworth Sensitivity: 90dB @ 1 watt/1 meter Grilles Included: Yes Mounting Hardware: Yes

    Thirty Years of Rockford Fosgate

    Rockford Fosgate products have been designed and engineered in Tempe, Arizona since the beginning. Rockford's 30 year reputation is grounded in engineering and manufacturing some of the finest audio products in the world. The company's no-compromise approach has yielded patented iconic products such as the Punch EQ, Punch 45 amplifier and the 3Sixty integrated signal processor. Today, Rockford's new products push the performance envelope even further. Each new product is a step forward--they sound bigger, they play louder, and run longer. Rockford never settles for "good enough."

    The 2010 product line represents the company's core philosophy. Rockfords new amplifiers, speakers and subwoofers have raised the bar on the competition.

    What's in the Box

    Rockford Fosgate Punch P1T-S Tweeter Kit, Grilles/Trim Rings, Mounting Hardware, Tweeter Surface/Angle/Flush Mounts, User's Manual

    Rockford Fosgate Tweeter Kits


Marty Miller
Reviewed in the United States on June 24, 2024
Installed two pair of these the highs are unbelievable
Marty Miller
Reviewed in the United States on June 24, 2024
Installed two pair of these the highs are unbelievable
John
Reviewed in the United States on June 21, 2024
These are clear and sound good. Would recommend.
John
Reviewed in the United States on June 21, 2024
These are clear and sound good. Would recommend.
William
Reviewed in Canada on November 30, 2023
Made a huge difference in my stereo system.
William
Reviewed in Canada on November 30, 2023
Made a huge difference in my stereo system.
Terminator
Reviewed in the United States on June 9, 2020
Bought these to replace a pair of Kicker tweeters that I got for $50 about 2 years ago. These were $10 more so I was really curious if they would be a better replacement.I installed one on the right side and left the Kicker tweeter on the left side to compare. Played some rap, rock and acoustical music and my attention kept turning towards the the Fosgate tweeter. It sounded more natural and clearer. Took the Kicker tweeter out and put the Fosgate tweeter in and was satisfied with the sound quality. I highly recommend these if you want something that sounds natural and clear. I used the -4db input on the crossover if anybody wants to know.
Terminator
Reviewed in the United States on June 9, 2020
Bought these to replace a pair of Kicker tweeters that I got for $50 about 2 years ago. These were $10 more so I was really curious if they would be a better replacement.I installed one on the right side and left the Kicker tweeter on the left side to compare. Played some rap, rock and acoustical music and my attention kept turning towards the the Fosgate tweeter. It sounded more natural and clearer. Took the Kicker tweeter out and put the Fosgate tweeter in and was satisfied with the sound quality. I highly recommend these if you want something that sounds natural and clear. I used the -4db input on the crossover if anybody wants to know.
Rob Tacker
Reviewed in the United States on February 4, 2020
Got these to replace the horrible factory tweeters in the F150. Install was fairly easy and the crossovers are small enough to stuff in the empty space at the bottom of the A-pillar. These are 60 RMS and I don't have an amp on them and they sound amazing (had to adjust the treble down actually). The system will get a full upgrade with amps, but these will probably stay as part of the upgrade! 👍👍👍
Rob Tacker
Reviewed in the United States on February 4, 2020
Got these to replace the horrible factory tweeters in the F150. Install was fairly easy and the crossovers are small enough to stuff in the empty space at the bottom of the A-pillar. These are 60 RMS and I don't have an amp on them and they sound amazing (had to adjust the treble down actually). The system will get a full upgrade with amps, but these will probably stay as part of the upgrade! 👍👍👍
Jessy3881
Reviewed in Canada on September 10, 2019
Just sound amazing in my F-150
Jessy3881
Reviewed in Canada on September 10, 2019
Just sound amazing in my F-150
Riley Jones
Reviewed in the United States on January 15, 2019
These tweeters are great for the price. I put these in my tweeter mounts in my jk wrangler to replace the stock ones. I did do a little modification so I would be able to use the Rockford grill and it looks great. Very sturdy and they also sound great. These are great for the price if you’re wanting to upgrade your old tweeters or even add some. You can’t go wrong with these. Feel free to comment and ask questions.
Riley Jones
Reviewed in the United States on January 15, 2019
These tweeters are great for the price. I put these in my tweeter mounts in my jk wrangler to replace the stock ones. I did do a little modification so I would be able to use the Rockford grill and it looks great. Very sturdy and they also sound great. These are great for the price if you’re wanting to upgrade your old tweeters or even add some. You can’t go wrong with these. Feel free to comment and ask questions.
Dada
Reviewed in the United States on August 3, 2018
I replaced my factory A Pillar tweeters with this tweeter kit. After some easy mods it provides a decent upgrade to the factory ones.I read in an earlier review that these were more or less "plug and play"..that is not necessarily the case. The tweeter is too big to wedge into the factory hole, so you have to figure out how you want to mod it. Some people "bored" out the opening so they fit, I didn't want to alter the trim, so I made a bracket out of a cardboard piece from the box (I fastened a small piece of cardboard with the bracket screws from the factory bracket against the back of the speaker in the pillar). That worked like a charm and should keep it snug against the plastic.I tested the crossover db settings and I agree with the folks who set the db at -4db, this adds plenty of highs to the music. The other options are -2db and 0db.The kit comes with 2 pairs of leads that have bare wire on one end and female leads on the other (for factory wire and crossover) and 2 pairs of leads with female to male ends (for extending the speaker wire to the output on the crossover). These are great and a must have, at least in my vehicle.All said and done a little over an hour to install these for me. Some stupid bumps in the road like the pillar trim snap in piece getting stuck added to the time as well as figuring out what I was going to do about the bracket, but thats how it goes when you save some money...very happy
Dada
Reviewed in the United States on August 3, 2018
I replaced my factory A Pillar tweeters with this tweeter kit. After some easy mods it provides a decent upgrade to the factory ones.I read in an earlier review that these were more or less "plug and play"..that is not necessarily the case. The tweeter is too big to wedge into the factory hole, so you have to figure out how you want to mod it. Some people "bored" out the opening so they fit, I didn't want to alter the trim, so I made a bracket out of a cardboard piece from the box (I fastened a small piece of cardboard with the bracket screws from the factory bracket against the back of the speaker in the pillar). That worked like a charm and should keep it snug against the plastic.I tested the crossover db settings and I agree with the folks who set the db at -4db, this adds plenty of highs to the music. The other options are -2db and 0db.The kit comes with 2 pairs of leads that have bare wire on one end and female leads on the other (for factory wire and crossover) and 2 pairs of leads with female to male ends (for extending the speaker wire to the output on the crossover). These are great and a must have, at least in my vehicle.All said and done a little over an hour to install these for me. Some stupid bumps in the road like the pillar trim snap in piece getting stuck added to the time as well as figuring out what I was going to do about the bracket, but thats how it goes when you save some money...very happy
Ricardo
Reviewed in Mexico on July 19, 2018
100% recomendados, tengo dos pares instalados y no me han decepcionado en lo más mínimo.Cuentan con crossover dedicado con ajustes de ganancia para empatar con tu sistema de audio y no opaque el sonido de los medios (los ajusté a -2dB) suenan muy fuerte y con excelente fidelidad. Muy bien fabricados con materiales de muy buena calidad. Vienen con dos tipos de soporte y todo lo que necesitas para instalarlos.
Ricardo
Reviewed in Mexico on July 19, 2018
100% recomendados, tengo dos pares instalados y no me han decepcionado en lo más mínimo.Cuentan con crossover dedicado con ajustes de ganancia para empatar con tu sistema de audio y no opaque el sonido de los medios (los ajusté a -2dB) suenan muy fuerte y con excelente fidelidad. Muy bien fabricados con materiales de muy buena calidad. Vienen con dos tipos de soporte y todo lo que necesitas para instalarlos.
Derrick LeBlanc
Reviewed in Canada on June 15, 2018
very clear and very powerful
Derrick LeBlanc
Reviewed in Canada on June 15, 2018
very clear and very powerful
Ladd Scavnicky
Reviewed in the United States on May 14, 2018
Wow, did these wake up my system!! I installed a full Rockford-Fosgate Punch amp/sub/speaker system and it sounded great. Only issue was the placement of the front stock speaker location....in the lower corner of the door panel. (2007 Monte Carlo SS) The system sounds great, but need a little extra to get the music off the floor. I installed these tweeters on the top of my dash, out by the windshield in the left and right corners. The driver side is on -2dB and the passenger side is at 0 dB. This did what they call "raise the floor" of the music. It sounds so much fuller, brighter and more enveloping. I actually had to adjust the head unit's equalizer flatter. But, wow, what an improvement to an already fabulous system. You will not be disappointed with these.
Ladd Scavnicky
Reviewed in the United States on May 14, 2018
Wow, did these wake up my system!! I installed a full Rockford-Fosgate Punch amp/sub/speaker system and it sounded great. Only issue was the placement of the front stock speaker location....in the lower corner of the door panel. (2007 Monte Carlo SS) The system sounds great, but need a little extra to get the music off the floor. I installed these tweeters on the top of my dash, out by the windshield in the left and right corners. The driver side is on -2dB and the passenger side is at 0 dB. This did what they call "raise the floor" of the music. It sounds so much fuller, brighter and more enveloping. I actually had to adjust the head unit's equalizer flatter. But, wow, what an improvement to an already fabulous system. You will not be disappointed with these.
Z
Reviewed in the United States on July 8, 2017
For the cost, these are simply an awesome buy. I placed them in a newer F-150 that came with a stock sound system (which is pure garbage...all Chinese paper cone crap). I've ended up replacing/upgrading everything except the head unit which is touchy for the new F-150s due to the harness. Anyway, the tweeters in the A-Pillars were the last component and these got decent if not great reviews. For just over $50 though they looked to me like the right product at the right price intersection. Glad I bought them. Along with the rest of my system, I can now push the fade back toward the rear of the truck, crank the volume to allow the amp to drive some power into the speakers, dsp and sub, and the tweeters and center speaker are able to fill in the vocals very well with nice clarity and not-too-harsh highs. The crossovers allow for 0, -2 or -4db operation which provide some nice options depending on the system. I could've gone with the higher priced, higher rated and assuredly better sounding T1T-S tweeters, but they are 3 - 4 times the price. These are fine. Maybe someday I can justify the audiophile solution, but not today.
Z
Reviewed in the United States on July 8, 2017
For the cost, these are simply an awesome buy. I placed them in a newer F-150 that came with a stock sound system (which is pure garbage...all Chinese paper cone crap). I've ended up replacing/upgrading everything except the head unit which is touchy for the new F-150s due to the harness. Anyway, the tweeters in the A-Pillars were the last component and these got decent if not great reviews. For just over $50 though they looked to me like the right product at the right price intersection. Glad I bought them. Along with the rest of my system, I can now push the fade back toward the rear of the truck, crank the volume to allow the amp to drive some power into the speakers, dsp and sub, and the tweeters and center speaker are able to fill in the vocals very well with nice clarity and not-too-harsh highs. The crossovers allow for 0, -2 or -4db operation which provide some nice options depending on the system. I could've gone with the higher priced, higher rated and assuredly better sounding T1T-S tweeters, but they are 3 - 4 times the price. These are fine. Maybe someday I can justify the audiophile solution, but not today.
sully
Reviewed in Canada on October 8, 2016
I bought these for use in one of my work trucks. First off the description on size wasn't accurate so I was planning on returning them until I was told there was a 20% restocking fee and return shipping of 30 dollars. The box it came in looked like it had been opened as well. I decided to use my hole saw to enlarge the hole required for these to fit and went ahead and installed them. I got a clipping sound from on of the speakers so I tried it on the other side and go the same sound. They dealer sent me out another single tweeter than had the same issue so I think it might be an issue with the crossover. Dealer wasn't much help and said it was an installation issue but when I put my old stock speakers back in there was no issue remaining.
sully
Reviewed in Canada on October 8, 2016
I bought these for use in one of my work trucks. First off the description on size wasn't accurate so I was planning on returning them until I was told there was a 20% restocking fee and return shipping of 30 dollars. The box it came in looked like it had been opened as well. I decided to use my hole saw to enlarge the hole required for these to fit and went ahead and installed them. I got a clipping sound from on of the speakers so I tried it on the other side and go the same sound. They dealer sent me out another single tweeter than had the same issue so I think it might be an issue with the crossover. Dealer wasn't much help and said it was an installation issue but when I put my old stock speakers back in there was no issue remaining.