Your cart is empty.
Your cart is empty.Product Description
HDMI RF Modulator Coax Converter VHF HD Adapter for Roku Fire Stick Blu-ray Player PS4 Xbox One Nintendo Switch to F Type Female ANT Output Coaxial TV
AoeSpy HDMI to RF Modulator Quick User Guide
- Plug and Play：No additional driver/software required, very easy to use.
- Video & Audio Signal Output without Delay : FHD 1080P@60FPS Video with HDMI input, NTSC/PAL anlog RF Video & Mono Auido signal output.
- NTSC-M/PAL-BG/PAL-l/PAL-DK Selectable : The default setting is NTSC-M standard format which is met most TVs in North American.(The item will work improperly if you use other standard format, please switch the standard format by the SYS key on the included remote control )
- CH3/CH4 TV Channel Selectable：The default setting of output is channel 3 and you can switch to channel 4 through the remote control when channel 3 is occupied (Channel 3-61.25MHz, Channel 4-67.25MHz).
- Video ZOOM : 10 levels picture zoom function is convenient for you to observe the details of the video, browse the monitoring picture.
- IR Remote : The infrared remote control has more special and interesting functions waiting for you to explore!
Warm Tips:
- If the old TV that has been stored /on hold for a long time, you need to power on and warm up for 1-6 hours until the picture can be displayed normally before attempting to connect to the device, then the work can get better results.
- If the indicator light on the item is red that means there is NO HDMI input signal, please check if the HDMI video source and HDMI cable are working normally or try with a new hdmi cable & device!
- The picture and sound are abnormal:It may be the output format is set incorrectly, please adjust according to the system supported by the TV (The standard format of TVs in The United States, Canada, and Mexico should be NTSC).
- The remote control does not work : Please check whether the battery insulation gasket has been removed.
Better Choice for old CRT TV
It outputs analog TV signals. Please note that it has the following disadvantages.
Picture Characteristics
- Resolution: Generally has a relatively low resolution, usually around 480i, with visible graininess and less sharpness.
- Color Representation: The color may have slight inaccuracies and is prone to color bleeding or distortion.
- Signal Interference: Susceptible to interference from external factors, resulting in picture noise, such as snowflakes or horizontal stripes.
Audio Characteristics
- Sound Quality: The audio quality is relatively poor, with a limited frequency range and lower fidelity. It may be accompanied by noise and distortion, especially at high or low volume levels.
- Channel: Mono channel, not stereo. The separation between audio channels is not very precise, and there may be crosstalk between channels.
Therefore, we recommend that you use this device with a CRT television. If you connect it to a large-sized digital TV, you will experience a loss in both picture and sound quality.
HDMI RF Modulator Coaxial Converter VHF HD Adapter for Roku Fire Stick Blu-ray Player PS4 Xbox One Nintendo Switch to F Type Female ANT Output Coax TV
HDMI to Coax RF Modulator Converter For TV
This TV modulator is a HDMI RF converter that comes with hdmi input F type female ( antenna / ANT ) coax output to convert hd digital signals into analog coax signals and help hook up your Apple TV, Amazon Fire TV Stick, Amazon Fire TV Cube, Nvidia Shield TV, Nvidia Shield TV Pro, Chromecast, Roku Streaming Stick, TiVo Bolt OTA DVR, Tablo Dual Lite OTA DVR, Sony UBP-X800 4K Blu-ray Player, LG UBK90 4K Blu-ray Player, Panasonic DP-UB820 4K Blu-ray Player etc. streaming media players or PS4 PlayStation 4, Xbox One , Nintendo Switch etc. game consoles; Or even Microsoft Surface Go, Microsoft Surface Pro 7, Google Pixelbook Go, HP Spectre x360 13-inch Laptop, Dell XPS 13 Laptop, Acer Predator Helios 300 Gaming Laptop, ASUS ROG Zephyrus S Gaming Laptop / PC etc. modern HDMI-equipped components with a RF splitter to share the program on multiple screens or to televisions that come with coax analog signal ( without HDMI output ) directly to dispaly tv program videos, even to connect your security camera / CCTV surveillance equipment to the monitor , projector or TV , then you can monitor the surveillance video screen while watching TV if your TV supports Picture-in-picture function; No more cables nor accessory behind each television , plug & play.
The Steps to Use the Item：
- Please remove the insulation piece on the battery compartment of the remote controller to ensure that the controller works properly.
- Connect the converter to your old tv with the included RF cable and adapter; Power on the device and the red indicator will be light on; Then, connect it to your HDMI output source ( DVD / Blu-ray player, game consoles, Set-top box ) with a hdmi cable until the red indicator turns green.
- Set the TV to channel 2 or 3, press the Mode button until you are able size the picture correctly on your TV.
Special Extension
Share HDMI Device to All TVS at Home
Generally, HDMI devices have a very short distance limit when connecting to a TV. Through this converter, there is no longer a distance limit. Share TV box programs, Blue-ray DVD Player, PC, Laptop, Game Console or Security DVR to all TV sets at home through TV channel 2 or 3.You can even watch surveillance on all TVs in your home through this device.
Warm Tips About How to Use This Item：
- Please use the channel search of TV to get the signal, then press "SYS" to switch PAL / NTSC to match your TV signal until the picture and sound of tv are clear (The default setting of product is grayscale PAL and find "USER" from "SYS").
- When the indicator of the converter is red that means there is not any HDMI signal input ; If the light is green , that means there is HDMI input .
- If your HDMI source works well and the indicator is red , please try again via another HDMI cable to ensure the converter can receive the video signal properly.
- The item ONLY supports mono sound output.
- When power is turned off to the RF converter it did loss the setting and needed to be set up again.
Customer
Reviewed in Canada on September 4, 2024
HDMI inputted from security DVR and then I Connected a 25 foot RG6 coax and the picture on the TV looks horrible. Instructions are from someone that does not communicate in english well at all. Cheap quality and terrible picture I am returning for refund I do NOT recommend
Peter H
Reviewed in Canada on May 22, 2024
Easy to use; connect HDMI cable from Shaw/Rogers Sat box; connect Coax Cable leading to older TV ; Plug in supplied power cord and it worked.
BruisedKnuckleHead
Reviewed in the United States on February 20, 2024
Easy to set up. Worked pretty good. Picture is grainy. I put a booster on it that helped. Needs a little bit more power in the RF output.
Christian Arnold
Reviewed in the United States on February 15, 2024
Tried using this to make SD content be in actual 4:3 on my CRT. It does have plenty of adjustment for size and zoom (which is more than you can say for other cheap analog video converters), but the picture quality is hot garbage. If you turn up the brightness to a viewable level it starts to get washed out and still isn't bright enough. The other issue is that picture quality is inconsistent. Depending on the scene, the picture would get brighter or darker and the colors would slightly change hue.This thing just really is not good. I don't recommend buying it unless you're dead set on getting something that is cheap and allows adjusting picture size, and you don't care about picture quality. I sent that thing right back.
daniel routhier
Reviewed in Canada on December 4, 2024
no problem
Mother Nature
Reviewed in the United States on October 5, 2024
I like to really test out certain products before reviewing so I've been using this daily for 8 months now on an old 80's tv with no issues. I love the remote b/c for older tv's you have to play a bit with the size etc. which is easily done and I really have not had to adjust since. I have it connected to my firestick the picture is clear. I'm really happy my perfectly good old tv got an extended life.
Tire guy
Reviewed in Canada on January 22, 2024
I purchased this to hook up an older TV that had only a coaxial cable input. It was easy to install and worked perfectly right out of the box. It has a very good picture and audio and saved me from having to purchase a new TV.
David L. Cutler
Reviewed in the United States on January 16, 2024
Purchased for an old analogue TV. Worked with a bit of fiddling, but it did work.No longer using as we have replaced the kitchen TV with a digital TV.
Andrew Naito
Reviewed in the United States on April 5, 2024
Just received and installed. Connected to an old Sony TV from the 1990s that still works. Easily converted from HDMI 1k source to coax cable. Tested with multiple streaming devices, including Roku Ultra, NVIDIA Shield Pro, and Amazon Fire Cube.Hopefully will work reliably. The Sony is in the family room and is rarely used. We should probably replace with a LED, but this unit makes the Sony useable since we finally cut the cord on cable TV. What's the point of cutting cable if you spend more money on replacement technology? This device fits perfectly if you want to save money on an occasionally used TV. If you're using the old TV regularly, then spend the extra money and get a new LED TV since the power savings should justify the expenditure.
Customer
Reviewed in Canada on July 10, 2023
Easy to connect and works right out of the box. Have not figured out how to use the remote which comes with it, but I have not needed to use is. The converter allows me to hook up my DVD recorder to the TV broadcast signal carried on the HDMI cable and record a program. At a cost of $50 Canadian dollars it is a bit expensive but it does the job and that is what counts.
Nerd Meet at 5
Reviewed in the United States on December 20, 2023
The media could not be loaded.
James Francis
Reviewed in the United States on November 10, 2023
I have had this for a while. I have an old treadmill with a built-in tv which uses a coax connection. I bought a firestick and needed a way to connect it up to the coaxial connection on the treadmill. This worked perfectly.I really don't understand the negative reviews but if you have a similar requirement, buy it. Setup is easy. Plug the HDMI device or cable into the HDMI port. Connect it to your coax port. Plug it in and you have a tv picture. Supplied remote is useful to tweak the picture. I liked mine zoomed in a little.Pros------Durable, I have had mine over a year, and it is still going strongEasy to setupAllow you to continue to use old coaxial devicesCons------Picture could be a little clearer, but I don't think that is an issue with the converter. It is just the nature of the beast.
Areej Ali
Reviewed in the United States on September 1, 2022
The devise worked on my old Mitsubishi TV. But unfortunately, when connecting the Fire-TV Stick after a few minutes of browsing or streaming the devise gets overheated, which then causes it to continuously disconnect/restart.Just to be sure, I connected a Google Chromecast HDMI devise and it was doing the same thing. Definitely was not worth purchasing for the listed prices, because I expected a greater quality. So disappointed!
Recommended Products