Your cart is empty.
Your cart is empty.Product Description
Mark L. Smith
Reviewed in the United States on March 5, 2025
This works well on a motherboard that doesn't have any RGB ports or controls. It's truly a stand-alone unit and a good value for some worthless lights that add no value to a case...
Hugo Parent
Reviewed in Canada on February 6, 2025
Remote doesn’t even work, and can’t control the lights on AuraSync like every other fan hub. Trash.
Customer
Reviewed in the United States on February 22, 2025
Works great. Lots of options to choose from in the settings on the remote. This will not work with some MB's (I have ASUS and does not work with Aura). Also does not work with Thermaltake software. It does have an MB mode on the remote but only does rainbow RGB for me when set to MB mode. Fans will run way too high so use your MB to program fan speed
William O
Reviewed in the United States on January 22, 2025
Cheap but effective. Lots of different color modes and compatibility. Kinda annoying you cant change the color besides the preset ones. Easy to set up.
Stephen H.
Reviewed in the United States on February 21, 2024
So I made the decision to consolidate all my fans and argb into one spot, make it look nice and neat, you know, ocd a little. So I continue to unhook a perfectly good argb pwm system and reroute all the wires to one spot. I hook this box is exactly as it says to do, turn the system on and white lights come on. Great, right? I grab the controller and go to hit a color and got nothing. Not a single button did anything to that box. So I was like, well maybe I got something hooked up wrong. So I power down and check everything to find out that it’s all hooked up correctly. I power it back on, all fans come on, no argb. Mash the buttons and get nothing. So at this point I’m starting to get angry and I just unhook the box entirely and reroute my wires to their original positions where the were working just fine. Power the system on, 3 fans have argb…so I unhook the 3 daisy chained fans from the argb port that they’re hooked up to and hook the argb plug to my arctic freezer ii 240mm still no rgb on it, so I try the other 3 daisy chained rgb fans and got nothing. This box apparently effectively killed the LEDs in 5 fans to include the ones on my aio. Now I have to replace them and since the daisy chained fans were corsair ql120s, I’m seriously considering what my options are in getting the seller to pay for the fan and aio replacement.
Zack
Reviewed in Canada on December 31, 2024
Easy to setup device for those who don't have an ARGB header on their motherboard or looking for a fan hub with manual control in general. Magnet makes its accessible when setting up.
Lemuel Gonzalez
Reviewed in the United States on December 30, 2024
I was skeptical with how cheap it looked & how not so name brand this product was. But desperate & on a budget, i took a chance on it. Im do glad i did, works like a charm, is magentic & convenient for most places on your pc. Can hold upto 10-12 fans(dont remember exact number) & is a life saver for me when i didnt have enough slack to flow my cords through a specific path. It also lights up & comes with a remote for preference. Honestly, a great fan hub all around. & with my corsair 3500x case, i can have more than enough air flow going through this hub!
Bandit
Reviewed in the United States on December 26, 2024
Works great and the remote has plenty of preprogrammed light cycles, but it really could use an app to fully customize. The magnet they advertise doesn't work at all for me, but I didn't really need it to stick to the case. Also the RGB on the unit itself is kind of goofy because it looks super ugly with all the fan cords sticking out of it, so it will always be hidden anyway.Works great though and can't beat the price!
Sever Tomorrow
Reviewed in the United States on December 24, 2024
The bad:Right when I took it out of its box it looked a little iffy. It looked like it has been handled a lot. However on a closer inspection it just looks like the manufacturing process to make this device is weak as there are inconsistencies everywhere. This does not look professionally made. Even the front brand sticker is crooked.No instructions were included either. I had to look up how to get this baby hooked up properly through a few different YouTube videos and articles.Also the fan power connections do lock in place but you have to push the connector in with A LOT of force. The ARGB connectors do not lock at all — the connectors just sit there and it doesn’t feel right. I’ve tried pushing them in as hard as possible without breaking it but nope.The good:It works and does its job. The RGB lighting on it is pretty cool too.Overall I still might return this as it just looks poorly made — I’m not feeling any comfort in longevity from this device.
Avfisher
Reviewed in the United States on July 15, 2023
Never heard of this brand but there isn’t a lot of universal pwm/Argb hubs on the market. All the “name brand” hubs all work specifically with their stupid proprietary connectors. This hub works with normal/standard pwm/Argb connectors that are standardized with motherboard headers. Most brands fans have proprietary fan connectors and then the connectors from the hub to the board are standardized. This hub was plug and play with no software needed(for remote control use). I wanted a hub+remote setup because this was being used in a home Nas I built with spare parts+new fans running unraid and while there are dockers/apps in unraid for controlling rgb it’s more complex than it needs to be so I wanted something I could control with a remote instead of software. I rolled the dice on this random cheap brand and couldn’t be happier. My only small complaint is that the magnet really should be stronger with all ports populated the magnet isn’t strong enough to hold it to the case. You’ll either need to mount it with a command strip, another stick on magnet that is stronger, or tuck it away some where as the included magnet is very weak. Other than that this is a really good piece of kit. Disclaimer: I can’t testify to how well this will work with motherboard software/3rd party rgb software since I am using it with the remote. It has responded and works well with the fan curves I set in my bios but as with most hubs you only get to set 1 curve per hub since all pwm functions correlate to the fan connected to the first slot of the hub.
Recommended Products
$27.95
$ 12 .99 $12.99