Your cart is empty.
Your cart is empty.Product Description
The NA-SYC1 chromax.black is a fan accessory set consisting of three NA-YC1 y-cables that make it possible to run two 4-pin PWM fans on a single fan header and to let the motherboard control the speed of both fans simultaneously. Multiple NA-YC1s can be daisy-chained to control more than two PWM fans via one header. The NA-YC1’s 4-pin connectors are compatible with both 3-pin and 4-pin PWM fans, but PWM control is only supported with 4-pin fans. Thanks to the black sleeving, the cables are ideal for creating PC builds with neat, focused aesthetics and are a perfect match for Noctua’s chromax edition fans.
Specifications
- Connector: 4-pin
- Colour: Black
Scope of delivery:
- 3x NA-YC1 chromax.black y-cables
Please Note:
Common mainboard fan headers support up to 9.6 or 12W (check your mainboard manual for detailed information). Please thus make sure that the combined power draw of the fans connected to one fan header using NA-YC1 adaptors does not exceed this value!
chromax.black Edition
Combine with our chromax edition fans, heatsinks and accessories to create an all-black build! Ideal for enthusiasts looking for true premium-grade products that can be colour-coordinated with popular build themes.
max reyburn
Reviewed in the United States on January 22, 2025
White looks clean
T. A. K.
Reviewed in the United States on July 1, 2024
5 star product easy fan splitter. Nothing extra just simple life saver if you do something like push and pull airflow for your AIO.
Luis
Reviewed in Mexico on June 3, 2024
Lo usé para poder usar todos los ventiladores de mi gabinete y es perfecto ya que es de 4 pines por si requieres todos los pines.La instalación es muy simple y el material permite doblarse bien. No tiene cables expuestos mientras lo trates bienEs perfecto, pero un poco caro para lo que es.
Kienan S Williams
Reviewed in the United States on May 5, 2024
Ordered these to avoid using a fan controller as this adds software that I’d rather not deal with. Prefer BIOS. I can split 2 x 4-Pins from one motherboard header. (One header for 2 x140 mm -Top) (One header for 2 x 140 mm- Front) these should work with an 4 pin.One included was included with my Noctua Air cooler for bilateral cpu fans.Now you can control pairs of fans in bios by changing one header setting. I.e Top, Front etc.Pros: Quick, Easy to Use, Enhanced Protective Sleeving, Malleable, Price.Cons: Lacks a few inches, could be a bit longer to feed through case cable management system. Not worth deducting a star, very mild issue.
Pablo
Reviewed in the United States on May 13, 2024
Easy purchase if you're looking to cut down on motherboard fan header use with the number of fans in your system. I have 10 fans in my case, so it was great to use this and the extension cable also offered by Noctua. Works great, quality, no complaints.
KF
Reviewed in Germany on December 11, 2024
Kabel hervorragend, wertig und gut verarbeitet, einfach toll
kevin
Reviewed in France on December 10, 2024
Je vous recommande grandement d'en acheter un kit si vous installez vos ventilateurs NOCTUA ou un ventirad NOCTUA, le câble management se fera tout seul même pour les débutants comme moiBonne qualité de fabrication, juste dommage qu'il ne soit pas full white car la touche de blanc est quand même assez minime, en terme de prix je ne les trouve pas excessif au contrario des 16 pads de protection
Automatic cat box
Reviewed in the United States on November 29, 2024
Works as it should, fit was perfect
MarquesAndreLuis
Reviewed in Brazil on November 22, 2024
na descrição lemos "Cabo adaptador de energia p/ ventoinhas, 10cm de comprimento, transforma um conector de 4 pinos (PWM) em dois conectores de 4 pinos (PWM).". mas na verdade "uma das pontas" tem 3 pinos (ver imagem). um dos fans não será controlavél. pensem bem antes de comprar. agora eu vou usar assim, até encontrar uma solução melhor.
Paul
Reviewed in the United States on April 8, 2024
It was hard to find white fan extension cables to go with my all white build so I chose these. Noctua has a nice selection of colors if you are doing themed builds. As you'd expect from Noctua these cables are well built. The connectors fit snugly on both ends (motherboard and fan) so I doubt they'll come loose. PWM and RPM work as expected. Just wish the protective rubber sleeve on the ends was also white.
P Hijduk
Reviewed in the United States on May 12, 2022
I was adding two additional fans to a MATX case and needed splitters as the MB only has two connections for fans. The cables on the fans being connected are lengthy and knowing this I started my search. As I was going through all the options on the market, I came across these in Red which I thought would give good additional color to the red theme already going on in the case. Knowing Noctua is one of the best brands of fans I had no additional thoughts about bad quality and made the purchase.Upon receiving them I was a little surprised at their length. Please see my photos. I used Quarters to scale it out on this review. The red is two quarters and total length is four quarters. However, I knew the case set up and I just needed enough to in total length to get it behind the decorative rail where all the cable management was. For my set up it is perfect.Talking about the quality of the cable build, I find it to be top notch.Regarding the split of connections. One will report back to the MB the speed the other will not. I only have three pin connections on the fan cable and this splitter accepts both three and four pin.
shane
Reviewed in Canada on December 3, 2022
Nicely constructed cables
Recommended Products