Your cart is empty.
Your cart is empty.Minwax Water Based Wipe-On Poly is a durable, clear finish that combines polyurethane protection with classic, hand-rubbed beauty. Applied with a cloth - no need to worry about drips and brush marks. Great for furniture, railings and trim. Easy water clean-up. Size: 1 Pt Hand rubbed beauty with polyurethane protection Easy water clean-up Applied with a cloth - no need to worry about drips and brush marks Fast-drying Great for furniture, railings and trim. Specifications Sheens: Satin Application Tool: Lint-free cloth Location: Interior wood surfaces Recoat: After 2-3 hours Dry Time: 24 hours before normal use Cleanup: Mineral spirits or paint thinner Coats: 2-3 VOC Content: Maximum VOC of 275 g/L. Recommended Uses Furniture, cabinets, woodwork, trim, doors; small floor touch-ups (scratches). FAQ's What is the benefit of using Minwax Wipe-On Poly versus a traditional polyurethane? Minwax Wipe-On Poly is easily applied with a cloth, without any drips or brush marks. It is the perfect choice for furniture, interior doors, trim and other woodwork. Can I use Minwax Wipe-On Poly on floors? Minwax Wipe-On Poly provides a durable layer of topcoat protection but it is thinner than regular polyurethanes. It can be used on floors to touch up small areas that are worn or scratched. For new floors or floors that need to be refinished, Minwax Fast-Drying Polyurethane or Minwax Super Fast-Drying Polyurethane for Floors should be used. Can Minwax Wipe-On Poly be applied over Minwax Wood Finish or other stains? Yes. Minwax Wipe-On Poly is a great way to protect finished or unfinished wood. Be sure to allow wood that has been stained to dry completely before top coating with Minwax Wipe-On Poly. Should Minwax Wipe-On Poly be sanded between coats? Yes. A light sanding with very fine sandpaper (#220) or fine steel wool will remove any fine particles of dust t.
smitty ruckus
Reviewed in the United States on February 1, 2025
Get inconsistent results with this product if it’s wiped on just a little too thick it resembles a permanent foggy glow which clearly is not the desired result.
John Sulsenti
Reviewed in the United States on January 17, 2025
Easy application, large amount for several small projects. I just wish it was a little duller of a finish or be available in Satin. The semi-gloss sheen should be great if you don't want a full on gloss on furniture. I'm using this in my modeling & on wooden folding knife scales. Do apply in very thin coats with very light very fine grit sanding in between coats for best results. My projects are small enough I apply it with my finger tip.
Javier Rodriguez
Reviewed in the United States on December 21, 2024
The Minwax Clear Wipe-On Poly is the first and only product I’ve purchased for my furniture refurbishing projects, and it has completely exceeded my expectations. This water-based polyurethane is incredibly easy to work with, providing a beautiful satin finish that enhances the natural beauty of wood while sealing and protecting it effectively.I use sponge painting brushes to apply an even layer of coating, and the results have been consistently impressive. The finish is smooth, durable, and adds a professional touch to my projects. Even furniture I coated two years ago still looks fantastic and shows no signs of wear, which gives me hope for its long-term durability.For anyone looking to refurbish or protect their furniture, I highly recommend this product. It’s simple to use and delivers stunning, lasting results!
J. C
Reviewed in the United States on December 20, 2024
This is one of my favorite finishes. If you want an easy job of applying a coding finish this might be your ticket.
Customer
Reviewed in the United States on July 9, 2023
I needed convenience for several small projects & didn't want to bother with buying a can as I usually do because there is always poly left over & this container is easier to seal than a can. I've used Minwax products for years and so this isn't my 1st time using their polyurethane at all. I sealed 3 sets of custom made furniture risers that had been stained but not sealed. I wanted to retain the stain color yet put on something durable to protect against scuffs. This flows on smoothly & dries evenly. It did a wonderful job.
Kelcie
Reviewed in the United States on June 9, 2023
This is my dogs wood food bowl holder, it was actually a shade lighter before and had no real polish/varnish so I decided to try and do it myself. I’ve neverrr done any kind of wood work so I was nervous, but I chose this one because its whipe on! It does exactly as stated, no brush strokes left on it, super easy, dries very fast and there was no real smell! I could even do it inside in a separate room where I let it dry! Just put some kind of cloth or sheet under so if it drips, but even then it was easy to get out of the floor! Also keep in mind, it DID make my wood a slight shade darker, it is something to be informed of. It wasn’t a lot just some but important to be aware of. Mine was the satin water based and as you can see not a lot of gloss at all which is what I wanted! Just smooth! very happy 😍
Aurora
Reviewed in the United States on February 28, 2023
I had a new handrail installed that was unfinished oak. I liked the natural grain of the rail and didn't really want to paint or stain it. After I sanded the rail down, I used this product on it, and it came out with a really nice satin kind finish. It did darken the oak a smidge, but love how easy it was to use. I put on 3 layers in 2 days. Plus, SUPER easy cleanup and not that toxic paint smell. I only used 1/2 the bottle and I'm trying to find something else to use it up on. Works great on wood, I tried it on a few other non-wood pieces in inconspicuous places... so far as I can tell it's really only good for wood. For wood, though, it's excellent.
stuerlitz
Reviewed in Germany on February 10, 2021
It's a great product. I used it on the neck of my guitar. It allows you to easily put a thin coat on at a time and it dries quickly. It's eco friendly and almost odorless. Highly recommended.
Ong Kwang Wei
Reviewed in Singapore on August 14, 2020
Very easy to use and gives very good results. I am never going back to traditional brush on varnish or spray can lacquer. Gives better results with much much lesser effort than traditional varnish in a much much shorter time.Gives better results with much much less effort than spray can lacquer though takes more time. Spray lacquer can dry in 15mins. This takes about 1 hour in Singapore's sunny weather.As good as odourless. Clean up with water so easy. Can wipe on with cloth also can brush on. But as it is very thin, there is no brush lines.Minimal sanding (compared to traditional varnish and lacquer) between the layers compared to traditional varnish and lacquer. Reason is minwax is so thin.Dries pretty fast, can be as fast as 1 hour in Singapore's sunny weather.3 to 4 layers gives me the results I want.Makes me wonder why this is not as popular as it should be. Guess is the cost.
Glenn
Reviewed in Canada on August 2, 2017
An easy to clean alternative to oil based poly.
Customer
Reviewed in the United Kingdom on April 12, 2017
Really cool! Color is lighter than the oil based Wipe On Poly's but I like it. Easy to use.
Sharon28
Reviewed in the United Kingdom on April 2, 2016
Worked a treat on my restrained funky kitchen. :)
TomWS
Reviewed in the United States on April 18, 2013
This is a water based 'wipe on' poly. Like all water based top coats, this covers well, is easy to clean up, and does not add any color to the base material (other than possibly darkening a reflectively flat surface). And, as a previous reviewer mentioned, this dries quickly and this feature can be a double edged sword. If you do not apply this over your entire surface within a short period of time, you can easily get ridges or overlaps that don't settle out.This particular product, however, has one advantage over all other water based top coats I've used, it is very thin (low viscosity) and is truly designed for 'wipe on' application. In fact, I would not recommend brushing this on since wiping on is significantly easier to apply the needed thin coat. I have not tried to spray it, it might spray well, but I really like the wipe on aspect and use this product where wipe on is preferred (built-ins or small projects).It is important to note that this is wipe 'on', not wipe 'in'. For each coat this should be applied in one smooth motion, with no more than a quick retrace to pick up excess. Any attempt to 'work' it into the surface will probably make the finish worse and loses the advantage of this finish, which is the ability to apply several thin coats within a day. In 4 hours I can apply 3 coats and I'm done. No sanding in between and very easy cleanup.So far I've only used this as a top coat for Milk Painted trim on some kitchen cabinets and I am very pleased with the results.My only complaint is that it is not widely available and I need to pay outrageous shipping costs for a single pint. Even with the shipping costs combined, however, this finish is worth the price.
Recommended Products
