Your cart is empty.
Your cart is empty.These shelf pegs are constructed of plastic and come in a clear finish for increased concealment. They are designed to receive 1/2 inch thick shelves and can support a maximum of 5 lbs. each, per peg. The main feature of these shelf pegs is the self-locking tabs that secure the 1/2 inch thick shelves in place, preventing tipping and rotating of shelves. The 1/4 inch outside diameter pegs have a 5/16 inch depth and feature serrated stems for a stronger grip. Adjustment Tip: To remove and relocate these support pegs, the tabs which lock in the shelves must be pushed in and held in while twisting the shelf upward in a clockwise direction if lifting the shelf from the left side. If shelf will be lifted upward starting from the right side, push and hold in the locking tabs of the support pegs (on the right) while twisting the shelf upward in a counter-clockwise direction from the right side. To accomplish this task a third or fourth hand may be required. Another option would be to slide in a couple of old credit cards or business cards in between the shelf's edge and the locking tab of the support pegs. This may assist causing the locking tabs to be pressed in by the cards when pushing up on one side of the shelf. Make sure the cards to be used are no longer needed as it is possible they will scratch and no longer be useful. Once the shelf is removed from its supports, the supports can be pulled out from the cabinet and relocated to desired height.
Jazzy
Reviewed in the United States on February 8, 2025
This is good product but it didn't work for my cabinets so I had to return. Measure, measure, measure to be sure this will work for your cabinets.
lobrdge
Reviewed in the United States on February 19, 2025
had one of our clips broke. So, I found these and really like them. a perfect fit. the others i had were smaller in thickness and wouldn't work. I wish all these types of clips they would make all one size for the part that fits in the holes. I understand for smaller clips but for cabinets shelfs they should be the same but they are not. I will buy these again. We even added an extra shelf to one of our cabinets and it worked perfect for that one too.
Patrick
Reviewed in the United States on January 25, 2025
It Works. Installed a couple months ago, no issues.
Pope Mel
Reviewed in the United States on September 21, 2024
Fit right in my 1/4” peg hole and holds my 3/4” shelf securely in place.
Willie V. Hughes
Reviewed in the United States on February 4, 2024
Not much I can say about these other than they work well. Make sure to very carefully measure three things: the space between your cabinet walls and the shelves, the thickness of your shelves, and the holes in your cabinets. If any of these things are off, you'll be in trouble. In my case, it was a very, very tight fit getting these mounts to slide in the narrow spaces on the sides in between the edges of the shelves and the cabinet walls.
RichardC
Reviewed in the United States on December 23, 2024
This shelf bracket fits perfect in my cabinets. 1/2 inch with 1/4 inch pin not easy to find.
KWgirl
Reviewed in the United States on September 28, 2023
When we got the shelf pegs, they were too large for our cupboard hole. We got out the drill and realized that the hole was not 1/4". We pulled out each drill bit up until it got to 1/4" and once we drilled that, the part fit. I'm hoping it lasts as long as the old shelf pegs as they lasted 20 years before they cracked and broke. It would be nice if it were made out of something a little stronger as the old shelf pegs were a thicker plastic, but they did last 20 years. We moved all the heavy stuff to the bottom shelf and put the lighter items on the top shelf. This is being used for a bottom set of cupboards.
Sandy
Reviewed in Canada on June 10, 2020
Seems to be okay for now
Ms. R. S. M. Davies
Reviewed in the United Kingdom on April 5, 2018
Needed to replace one of these in a bathroom cabinet, and these where better quality than the ones the cabinet came with! The bit that goes in the existing hole was a bit smaller than I needed, but as it sits flush in the cabinet it made no difference to its usability.
Recommended Products
