Your cart is empty.
Your cart is empty.The Armour Line RP77271 Pipe and Tubing Reamer removes rough edges of tubing; Helps provide a clean working surface prior to assembling tubes; Removes burrs on tubing 1/8 in; to 1 5/8 in; in diameter; Grooved durable hard plastic body for better grip; For use on PVC pipe and copper tubing only; Prepares tubing for soldering, removing sharp edges; Constructed of long wearing steel blades. If too much force/pressure is used it will cause damage to your tubing or pipe.
Jimmy Linville
Reviewed in the United States on March 5, 2025
Inexpensive and works great!
Product Purchaser
Reviewed in the United States on March 11, 2025
I was surprised at how well it works given how inexpensive it is. I use it at work for deburring the outside of 1/4” OD copper tubing. It is shallower than the other one I have (which is a lot bulkier and cost a lot more than this one). This makes it good for when I’m deburring a tube that has a short end after a 90° bend.The frame is made of plastic and it’s very light so I know it’s definitely not gonna hold up forever - that said, for how cheap it is I can always easily just buy another whenever that day comes.As I mentioned before though, I can really only speak having used it for 1/4” OD copper tubing. It most likely doesn’t work as well for larger-sized tubes.
Matthew J. Hodges
Reviewed in the United States on August 23, 2024
Definitely not a Rigid but works fine. DIY friendly cost
Robertomondo
Reviewed in the United States on October 3, 2024
Very nice reamer, easy to use, works well, great price
Arnold P. Lillie
Reviewed in the United States on January 11, 2024
I used this pipe reaming tool a ton on my daughter's house and it worked great. Easy to use, simple design and it stood up to many reaming (deburring) operations. Would definitely buy this again.
debra s smith
Reviewed in the United States on November 17, 2023
Great reamer - used on PVC 1/2" and 3/4" pipe did a good job of beveling inside and outside. Yes you get some chatter on the bevel but that really doesn't matter as far as pipe fitment is concerned. Sturdy tool but like any tool if you use it harshly or abuse it, will break or become regraded. If you use medium pressure with this tool it will last a very long time. Cutter blades are quite sharp, will work on PVC pipe up to & including 1".
Compeek
Reviewed in the United States on April 12, 2023
This is my first time working with copper pipes, but I needed to replace an outdoor freeze proof faucet, and the old one wouldn't come loose, so I had to cut the end off the pipe and put on a new fitting.I was working with 3/8" pipe, and it was a bit tricky to keep the tool straight as I turned it around. It got the job done, but it would probably work better if it had more blades to help keep it aligned. But, that's why it's so cheap, I guess.One thing worth noting is that it seems to cut by turning counter-clockwise. The blades appear to only go one direction. It seemed counter-intuitive, but once I figured that out and applied some pressured, it did a decent job.I found that reaming the inside first and then the outside led to a cleaner result. And then definitely follow up with an emery cloth or sand cloth or whatever and try to finish any last deburring with that.
Stephen B.
Reviewed in the United States on December 1, 2021
it does technically work. It will clean up the edges of a cut piece of pipe, dislodging sharp burrs and smoothing rough edges. However, it's considerably more messy than a proper pipe deburring tool and takes a steady hand to use properly. It is nice and quick, so on jobs where you just wanna get the pipe deburred and be done with it, it works, but expect to have to reuse it on pipe ends quite a lot until you get good with it.
Recommended Products
