Your cart is empty.
Your cart is empty.
PPE's cast aluminum, high-volume transmission pan is engineered to be a direct bolt-on replacement to the stock-stamped steel pan. This easy upgrade has a 5-inch depth and holds 14 quarts of fluid - that's 7 quarts more fluid capacity compared to using the stock pan! The internal heat sinks channel oil and prevent sloshing, deep external fins radiate heat to keep fluid temps down, and thick side gussets add strength and provide rigidity.
PPE includes a powerful Neodymium magnet equipped billet 304 stainless steel one-inch drain plug to help pull the ferrous metal out of the internals before they can do damage. The kit comes complete with zinc-coated socket-head hardware and a 1/8" NPT plug which can be removed if you want to run a temperature sensor. This upgrade is compatible with the stock filter and you reuse the high-quality factory gasket.
Covered by a limited lifetime warranty.
Installation Disclaimer: Replace with a new copper washer after each service.
Jimmy G
Reviewed in the United States on March 8, 2025
Rock solid
Thomas Hahn
Reviewed in the United States on August 13, 2024
The instructions don't say you need to remove cross member to install. Because you can't put 3 bolts in. Also the cross member needs to cut 3/16" off front of it because oil pan it's it and the bolt holes DON'T line up this is on my super duty 6.7 diesel. Also no magnet in the bottom of the pan. It's aluminum
Carlos
Reviewed in the United States on November 3, 2024
Installed on 2017 F350.Pretty standard install.My pan did not have a drain plug and I had to change my filter.Went with a new gasket just to be sure.Nice and beefy!7 qts more of transmission fluid capacity.The oil pan is must!
Edward F.
Reviewed in the United States on November 10, 2024
Great quality and good fit. It has been installed for nearly 20k miles without no leaks! Great trans pan.
SSR-Chee
Reviewed in the United States on April 8, 2024
Install on my 2016 diesel and fits perfect all hardware was there and looks great. I would recommend this product.
Kevin
Reviewed in the United States on January 11, 2023
My 2018 6.7L Powerstroke was due for a transmission filter & fluid change. To my surprise my transmission pan didn’t have a drain plug, I would have to take a fluid bath to change it. I came across this pan and decided to give it a try. The pan took me about 30 mins to install.Pros:4-5 quarts extra capacityUngraded stainless steel hex boltsStainless Steel drain plug with magnet tipPan works with factory gasket
Michael S.
Reviewed in the United States on April 2, 2023
Fit like a glove to a 6R140 torque shift 6 transmission.Total of 17 quarts to fill after install
Recommended Products
$49.99
$ 26 .99 $26.99