Your cart is empty.
Your cart is empty.The 6-Inch x 10-foot PVC Dust Collector Hose - POWERTEC 70221 A practical, safe and cost effective dust collection hose designed to enhance your existing workshop dust collection and filtration systems. Flexible Versatility Whether you have an industrial vacuum cleaner or a centralized dust collection system built into your shop, you understand the importance of having a super lightweight, flexible and kink-proof dust collection hose that can withstand the rigors of everyday shop use. Heavy Duty Made from high quality PVC material, this hose will not collapse under pressure from your dust collector. PVC s durability, strength and easy installation make it ideal for workshop dust control, sawdust collection, carpentry and woodworking applications. Innovative Design Features Flaunts an impressively translucent body, reinforced by interior spiral spring steel wire allowing you to monitor your air movement performance, debris collection and fine dust separation/ filtration. Rated Safe With dust collection, one must always consider the dangers of static electricity and fire risk. This PVC hose features a flame retardant construction, is temperature resistant (up to 176° F) and is capable of electrostatic discharge (when grounded). It also offers exceptional resistance to chemicals along with acidic and alkaline materials. Product Specification Data Construction: Heavy Duty Soft PVC (Polyvinyl Chloride) Reinforced Spiral Spring Steel Wire: Spring Steel Wire Size: 6 inches diameter x 10 feet long Wall Thickness: 0. 5 mm / 1/64 Compression Ratio: 3: 1 Temperature Range: -50° F to 158° F (short term up to176° F)
Product Connoisseur
Reviewed in the United States on January 16, 2025
In order to get the full 20 feet you have to really stretch the hose way out to its max. The hose seems high-quality and I’m sure it will last me a long time.
DENNIS HYBACK
Reviewed in the United States on June 18, 2024
I had to replace the hose on my lawn vacuum after only 2 seasons use. This hose was 1/2 the price andwith a slight modification to the lawn vacuum I only needed to use 5 of the 10 feet that I bought.I have 3 seasons on this hose and it's still working fine. No cracks or tears.
Woody Anderson
Reviewed in the United States on February 13, 2024
This is a versatile low(ish) cost solution for dust collection.The fit is very good and tight onto a rigid vacuum port, and can be manipulated to turn corners in tight spaces etc. without kinking like a clear-flex hose, or without adding difficult coupling lengths when you use rigid pipe.The bend & hold aspect works very well, and the pipe doesn't compress under vacuum or expand/blow out when used on the end of a planer which blows more air that a rigid will suck.I found that the 'fit' on the end of the planer wasn't quite as snug and required a simple hose clamp so the planer didn't eject it immediately. Fit on my other fixtures was very tight and though you can certainly hose clamp them all (especially if your at your final solution), I've had no issues simply using tape.The hose holds its shape in both situations and I was able to fix both situations with a single 36" pack, which I cut with snips and a utility knife.This was a big upgrade from clear flex-hose which compressed or flapped when sucked/blown and required more bracing etc.
Customer
Reviewed in Canada on October 14, 2024
This is great quality and what I was hoping for. It’s perfect for the purpose I ordered it for.
Bill Davies
Reviewed in Canada on September 22, 2023
For something that is "Heavy Duty", I would not want to see their light duty
RKS
Reviewed in the United States on August 25, 2023
I bougt this because it was half the price of the AgriFab vacuum tube and long enough to use with a zero turn mower without an extension. It does fit over both the discharge shut at the mower deck and the suction intake at the motor. While it is thinner material it works well with a slight modification. I slit the old, worn out, AgriFab tube town the middle and slipped a 3' section of it it over this tube where it may come in contact with the ground or rub on the mower's tire during turns. This provides abrasion resistance for the new tube.
Chris
Reviewed in Canada on August 12, 2023
It is see through so it is easy to see the grass going into the grass catcher. It is flexible so it moves easily when turning the mower on corners
Tim Douglass
Reviewed in the United States on May 7, 2023
I purchased this hose to extend my dust collector on my industrial blast cabinet. It works great and it’s lightweight. I was worried how it would hold up but it’s been in service 8 hours a day for the last 2 weeks with no problems. This is a great buy
Richard L
Reviewed in Canada on August 5, 2021
Thin PVC makes it light duty. The way it is designed places the spring wire inside the hose (higher friction). Much better hose available for the same price.
Dale Ryan Leckie
Reviewed in Canada on July 6, 2021
I tried to run this around a bend. It’s didn’t collapse exactly, but it bent in a very strange way that restricted air flow. I was expecting this to be a tough as most of the 4” hose I have, but it’s much softer. That may be a good thing for some people.
captain hook
Reviewed in the United States on December 19, 2021
I was expecting some very cheap tubing for the price but its actually very nice. unfortunately its just not tough enough for my yard vack as a few sticks did put holes in it. for any lighter duty application i would definitely buy again!
AKFred
Reviewed in the United States on September 25, 2020
I used this between my Thien baffle and dust collector. Since it is 10' long I have that little extra distance I may need for dust collection. Both my baffle and dust collector are on wheels, so this hose make it easier to maneuver everything around.Pros: It is flexible It makes for easy connection to dust collection system Material is thickCons: Not easy to find good clamps. Not really a con on this item though.
B. Sherman
Reviewed in the United States on March 27, 2020
good hose to use for the leaf vac, and a great price. only used for 1 fall of leaves so far, but it worked good and has held up good. need to have ability to hang it in between the mower and leaf vac well, as I ended up running it over twice while backing up and I thought I had it supported well. but was able to bend it back into shape and it did not break the hose. added another tarp strap at the back of the mower and that solved the problem.
Recommended Products
