Your cart is empty.
Your cart is empty.INCLUDES ABRASIVE MATERIAL * Connect tool to your air source through air adapter (included), insert spark plug in end, push blaster button for a few seconds, and remove cleaned spark plug * 2 Position cleaning, position 1 for rigorous abrasive cleaning and position 2 for air blow-off * Mounting flange to attach to workbench * Brass air adapter included * Blaster removes carbon build up on plugs, or will thoroughly dry a flooded plug (blow-off mode) * Air consumption 7.7 CFM * 3/8" hose recommended use * 1/4" NPT inlet, recommended 90 PSI * Works with all spark plug types and sizes Overall dimensions: 8-1/16" L x 2-9/16" W x 3/4" diameter
Jim Lyons
Reviewed in the United States on April 10, 2025
great to have in your shop
Jeff.
Reviewed in the United States on February 14, 2024
Cleans plugs back to new condition quickly. Saves cash.
ron herring
Reviewed in the United States on January 12, 2024
Just what I needed for the shop. Won't be used much but is nice to have it when needed
Nathaniel Rohman
Reviewed in the United States on January 4, 2021
Tool arrived broken had to rdturn it so i never got to use it
Earl
Reviewed in the United States on February 22, 2015
Didn't work for me; wouldn't recommend it. Does a terrible job of cleaning the plug, and leaves sandy residue behind that doesn't fully blow clean with compressed air. It also puts a cloud of toxic ultra fine dust into the air. You ought to wear a dust mask while using it, and don't let kids use it! After experimenting with it a few times, I just threw it out, and have gone back to the old tried and true method of carb cleaner, small file, wire brush and gapping tool to give new life to my plugs.
nikonic
Reviewed in the United States on October 11, 2015
Love it. Like that I can mount it. Not so sure about the connector bib. Setup for a crimped hose option. I just set it up that way for now. not sure if it can be changed out but it wont matter once it is mounted anyway. Have a bad valve on the Yota 4X4 and this will keep me from buying new plugs every few weeks until I get the head replaced. I used to work in a mall engine shop and this was good to have around . I like this product!
J. Vining
Reviewed in the United States on May 29, 2013
I tried it for the first time this past weekend. The first thing I did was remove the barbed hose fitting and replace it with a quick connect coupling for my compressor hose. I also mounted it to the wall per the instructions. After putting the cleaning media in that came with it and using it on 8 spark plugs I can't say I'm very impressed so far. Maybe I need to upgrade the blasting media. I tried cleaning in both switch positions and didn't see any difference. At least the cleaning media didn't lodge itself in the sparkplug like it did with another reviewer.
Smith
Reviewed in the United States on July 1, 2012
I used to have to buy new plugs all the time but now after a few outings on the jet ski I have a spark plug rotation where I always have some clean ones to put in. Takes a bit of use to get them to come out perfect but its fun and the feel good factor is huge. Yes spark plugs don't last forever but in a 2 cycle motor they foul over time. In fact they foul far quicker then the actual spark plugs life ends. For years I have tossed foul plugs away when all they need was a little grit blasting at them to scrap off the oil slick that builds up on them. Keep in mind a good 2 cycle synthetic oil is the key to keeping plugs cleaner. I used a low grade walmart oil and my machines were eating plugs. After switching to a name brand ( Yellow bottle ) oil my plugs lasted way longer.All in all I love this little guy and for the price it pays for itself in a few plug cleanings. Get it.... It will pay for itself after a few uses where you would have bought new plugs. If you don't have one you need one. Keep in mind if you look at your plug and you see warn metal on the conductor or the electrode you need to toss that plug. In 2 cycle engines that will take forever to happen.Don't forget to take some sand paper and knock off any arching marks where the plug fits in the rubber boot. My jet ski makes a few arching marks from time to time and it makes a dead spot on the connector. I just use sand paper to make it all shiny again and we are back in business.You need one so buy it! Plus you friends will say " dang I didn't know you could clean them "
Recommended Products
