Your cart is empty.
Your cart is empty.Product Description
-
Get Printing Parameters
All the recommend parameters are provided. Refer to resin profile spreadsheet on Phrozen website.
-
Bring 3D Printing to Life
From home décor to figurines and cosplay, discover models that inspire limitless creativity on PIXUP
-
JG
Reviewed in the United States on March 5, 2024
I use this in phrozen sonic mini 8k S.Results are excellent. Details are precise. No problems to remove from build plate with normal effort.Plus this is water washable.It is worth the extra cost.
Dude Guy GO
Reviewed in the United States on March 1, 2024
I would give this resin five stars if it weren't more expensive than others. The detail comes out great and it's slightly more flexible than some others. However, I still find it to be a bit brittle. I love that it's water washable though and my print still came out nice. I just don't think it's worth the extra cost for this resin.
jackbytor
Reviewed in the United States on September 21, 2023
Using this in an Anycubic Photon Mono 2. This stuff is amazing. As usual, once you zero in your exposure and such, mis-prints are a non issue. My exposure is set at 2.80 and I have no problems. The smell is very minimal and clean up is a snap since its water washable. And with a rinse and cure machine it's a no brainer. 5 minute cure time and the minis are just the right flexibility for normal gaming use. Do yourself a favor. If your are in the market for a water washable resin for your 3d printer for gaming minis, search no more. This is the stuff.
Kai
Reviewed in the United States on February 21, 2023
Resin is awesome. The detail may be a bit off (but I do 6mm wargames) but the tanks barrels are reliable enough to not break on a drop. It has some degree of flex but isn't gonna flex a large amount. Just enough to keep from snapping. It will snap eventually but that's from intentional bending. I completely switched to this resin outside of having to do clear models.
Great Dane Inc.
Reviewed in Canada on November 21, 2023
Will keep ordering this resin so easy to wash and with water muhaa way cheaper then alcohol. Printed on my sonic mini 4k . Will order more soon
Wayshwing
Reviewed in the United States on August 12, 2022
3-D printers that use resin and LCD screens are amazing technology. I’ve been 3-D printing for almost 10 years and started with the old maker bot FDM. These 3-D resin printers can’t be beat for speed and resolution.The key to great resolution and quick printing is a watery resin. Resin that is too thick and viscous doesn’t flow very evenly and cures slowly. In the old days the trick was to warm the resin so it would get thinner and more watery. The thinner the resin the sharper the resolution of your parts.This resin is by far the most watery 3-D resin I’ve used. It is actually very close to plain water and it flows smoothly with no bubbles almost. Parts come out super sharp and super high resolution.The other benefit of watery then resin is it washes off much easier than thick gooey resin. I will be using this brand from now on on all five of my printers.
PIERRE TREMBLAY
Reviewed in Canada on August 4, 2021
Best Resin I got so far, very low odor, some flex but rigid
Adam Young
Reviewed in Canada on June 2, 2021
This resin has been great so far for printing miniatures in my anycubic photon mono. It shows detail fantastically. The cured models have some flex to them which should make them less prone to breaking.Ran the anycubic resin calibration print and ended up with 2.6 second exposure times per layer. That's for a mono screen.It's water washability is.. OK... In an anycubic wash and cure 2.0 I wash it in water for about 15 minutes. That removes the majority of the resin but there's generally still some in the crevices of the print. A couple sprays with some IPA is enough to get the last bit. I find a cure time of 4-6 minutes in the curing station cures it enough to harden the model but still leaves some flex.
Jonas
Reviewed in the United Arab Emirates on May 23, 2021
Water washable is definitely the best, no mess at all.Great details and overall easy to use, won't ever buy the regular stuff again!
G. Hess
Reviewed in the United States on May 22, 2021
This resin is faster than Elegoo WW. All results n attached photos were from Mars 2 Pro at 0.030 mm layers, 30sec base layers @ 5 layers, no transition layers, 2 sec normal layer exposure. Elegoo WW I have to use 35sec base and 3 sec normal layers. A nice savings in time for the Phrozen.I am not sure what some of the other reviewers tried, but I found this resin cleaned up very easy with water, taking less than a minute to clean with cold water and a toothbrush.This resin is also much less brittle than other WW resins I have tried. This made the very small Miniatures in the photos very easy to remove from supports without loosing fingers, hands, wings, and other small details. It also cures very fast, so be careful that you do not over-cure your prints.I have also had no failures so far in printing with this resin.I have printed with my Mars 2 Pro almost nonstop since getting it 2 months ago. I have been through over 10 liters of resin in that time, printing small and large multi-part models. This resin is now my go-to resin for all my printing.
J. Renaud
Reviewed in the United States on April 15, 2021
I typically use Elegoo's water-washable resin and have no issues. Bought Phrozen's as it was a bit cheaper, but had quite a few issues. Already sliced prints that had printed perfectly with Elegoo, failed with Phrozen's resin. Either not adhering well to the build plate, or supports not holding the item. I eventually realized that Elegoo needed a longer cure time per layer (using a Creality with mono-screen), it also took longer to cure after washing. So while it's a decent resin if you're looking for water washable. Just know you're going to have longer prints due to longer cure time. The quality of the prints when they don't fail is great though.
Luis G. Rodriguez
Reviewed in the United States on September 24, 2020
I am quite new to resin printing, so I can only compare this to the other two resins I've used, Elegoo normal rapid and the water washable version. In short, this is the resin I'd take for smaller parts (still have to test for larger parts, though). I added a table with my results opinion, not hard science. Price data is the one in Amazon in the moment I am writing this.With this resin I printed a file that failed twice with the Elegoo Water Washable, even though more support was added. With this resin I think that I even will have to remove some supports due to the fact that they are now much more resistant and more likely to stay in place. I had to use my flush cutter, quite lightly, to remove even my thinner supports (which are very thin), something never happened before. Less material to use in supports and less failed prints is a very good thing.All in all, for now and for the stuff I print, this is my to-go resin. Will update as I work more with it.Edit: tried the Grey one now, really good too and also washes perfectly with warm soapy water. My prints were a little brittler so If I'd have to decide, the black one is a tad better and, in the future, I will stick to it.
M Jean-Charles Vauzelle
Reviewed in Singapore on December 30, 2020
easy to use and clean, almost no smell
Recommended Products