Your cart is empty.
Your cart is empty.Product Description
Compared with other common transparent resins, the outstanding feature of Siraya Tech Craft High Clear Resin is that it has a very strong resistance to yellow while still easy enough to print and process.
Yellowing-Resistant
Siraya Tech Craft Ultra Clear Resin ensures long-lasting clarity without yellowing, making it perfect for crystal-clear projects. To retain its pristine quality, avoid over-curing and finish with a clear coat.
High Transparency
Craft Clear Resin yields transparent prints when cleaned, cured, and coated per our guidelines. A coating is key to maintaining the model's clarity. For best practices, see 'Product guides and documents' on the details page.
Get A Clear Print Appearance
Like any clear resin, prints made with Craft will have a foggy translucent look right after cleaning and post-curing. This is due to layer lines from the printing process that refract light and create fogginess.
To restore the clear look, there are two approaches:
- Sanding is good if the object has a lot of flat surfaces. For example lens.
- Clear Coating.
Please read the user guide before your first print.
tinman
Reviewed in the United States on September 9, 2024
This is really unique resin, the glow strength is slightly less than you might get with other processes like casting or molding, but to even manage this effect at all with resin printing is amazing.The pigment, however, collects at the bottom VERY quickly in a sludge. You need to scrape the bottom of your vat FAP and thoroughly stir the resin if it has been left to settle for even an hour. Same for the bottle, it needs really thorough and timely mixing before pouring and printing.You can successfully mix this with colors and dyes, but it will always glow green.
Denny Sawyer
Reviewed in the United States on June 20, 2024
I've used other "clear" resins in the past, and they can best be described as translucent, not really clear, and some are very weak and difficult to use, so I was a little hesitant to spend over 40 bucks on this, but based on Siraya Tech's reputation I decided to take a chance. The quality is great, it prints well using fairly normal exposure times (4.5 seconds on my Creality Halot One), and the clarity is far better than any other clear resin I've tried, but it's still not "crystal" clear unless you coat it with some clear finish. And it does yellow if you cure it for too long, but not as bad as many other resins. This resin is also weaker and softer than regular resins - that's true with all the clear resins I've used - so you do need to be careful when handling the model. It's stronger when cured, but still fragile. Overall, I'm satisfied, but wish it didn't cost so much.
John Eblan
Reviewed in the United States on May 14, 2024
This is a new resin for me. It worked as described and the printed parts were amazing
Jared Bostrom
Reviewed in the United States on March 30, 2024
I’m used to using the simple clear version from the same company. The craft version is a lot thicker. But with the right print settings, it worked well.
Daniel
Reviewed in the United States on March 1, 2024
When using this resin it has a very strong oder.All the final prints I did with thus resin turned cloudy
Markus Müller
Reviewed in Germany on April 21, 2024
Das Resin als nicht Gelb zu bezeichnen ist ne absolute Frechheit. 1 mal und nie wieder
Johnno
Reviewed in Australia on July 27, 2023
I ordered this as it offered clarity. I have followed all the website instructions and used the whole bottle testing and yet never achieved the clarity advertised
JAME5
Reviewed in the United Kingdom on February 17, 2023
After finding the correct layer times for my printer (2.5sec) I have been getting excellent quality parts with this, and following the guide for improving transparency and stopping yellowing it's been great for prototypes. I will be buying this again!
Customer
Reviewed in the United States on November 17, 2023
This resin is terrible for camera night pictures. Details are soft therefore, it looks like a squiggle when a night shot is taken with figures made from this resin. The glow is there yes, but not the best resin for darkness pictures. This resin would be good for Leprechaun's day or that one holiday that involves pinching when no green is worn. Or the figures could be used for a nighttime scavenger hunt that has riddles to reveal the location of the figures. This resin isn't bad at all, it has its purposes.
Erik Knight
Reviewed in the United States on October 17, 2023
I was on the fence about buying this due to the price, but i finally took the plunge for a print I was making for my son. At the moment I only made some lightsabers but they came out gorgeous the first time. The Glow effect seems to last about 3-5 minutes when I use the sun or bright bulbs to ‘charge’ it. Or turn on some Black lights and make it glow continually! I’ll buy again definitely.I will update later when I make more detailed prints.
Filmomentum Canada
Reviewed in Canada on November 7, 2022
It took me a bit of time to find the right settings for my printer but once I got the hang of it it was a lot of fun to use.
Gator
Reviewed in Japan on November 17, 2022
黄変しないレジンを求めていたので満足してます。IPAで洗浄するタイプのレジンで臭いはありますが、プラズマクラスターを横で使えば気になりません。
David Welsh
Reviewed in the United States on October 27, 2022
Fantastic glow in the dark resin. VERY bright, long lasting glow. Prints and dyes well.I used UVO (smoothon) pigments to dye the base milky white resin to an orange color. The glow color, which is yellow/green is not effected by this.Printed very well across multiple machines based on the supplied recommended machine print settings pulled from the Siraya tech website.I've printed using this resin on the following machines using the Lychee slicer and Siraya Tech provided profiles. No changes made from the recommended defaults. All printed at 35UM.Prusa SL1SElegoo Saturn (pumpkins in pictures were printed on this machine)Elegoo Saturn2Peopoly Forge
Recommended Products