Your cart is empty.
Your cart is empty.Product Description
PCI Express Gen 2 to Serial ATA/SATA III Controller Card-2X 6Gbps SATA III Ports for HDD/SSD
LTERIVER PCE-G2S2 is a PCI Express Gen 2 to SATA III (Serial ATA) 6Gbps controller. It will covert PCIE X1 signal to 2-Ports SATA III on desktop PCs and Servers. Allow users add 2X max SATA HDD/SSD on their system for Boot Up or Storage. This PCIE SATA III card will support Plug and Play on Windows, Linux and MAC OS systems, now no need to install driver anymore for PCIE SATA expansion cards.
WARNING:
1. This PCE-G2S2 PCIE SATA card no need to install driver, if PCs or Servers cannot find the added-on HDD/SSD and this device, then double check if the mother board PCIE slot is active and open. Some brand mother board may have defined PCIE function when it produced. User better call mother board manufacture locate the problem.
2. PCE-G2S2 was set on AHCI Boot Up mode. If users using the classical IDE mode, user’s PC will report BSD error. If users do not know which mode is running on PCs, follow steps as below: Windows Device Manage-IDE ATA/ATAPI Controllers- Will see “XXXX SATA AHCI controllers” or “XXX IDE controllers”.
3. PCE-G2S2 is designed on PCIE X1 interface, will works on PCIE X1, X2, X4, X8, X16 slot. Normal users better check if it has empty PCIE slot before purchase.
4. If user add the new or recovered HDD/SSD on the system, users must add this disk on system by Windows reminder in Windows Device Manager-Storage-Disk Management.
Industry Specifications Compliance:
PCI Express Base Specification Rev. 2.0,Bus Master Programming Interface to IDE ATA Controller Rev. 1.0
PCI Express Card Electromechanical Rev. 2.0,Serial ATA AHCI Spec. Rev.1.3,Serial ATA Revision 3.0
PCI Express Features
PCI Express X1 lane for 2.5 and 5GHz signaling,Single virtual channel,SSC support
ECRC and Advanced Error Reporting capability,100MHz differential PCI Express reference clock in,Maximum Payload up to 128 bytes
Serial ATA Features
2 ports Serial ATA PHY for 1.5, 3.0 and 6.0GHz signaling,Support AHCI mode
Support Native Gommand Queue,Support Gen 1m and Gen2m SATAPHY
Technical Specifications:
SATA III 6Gbps Max Speed
- Based on PCIE 2.0 X1 Signal,Provide 5Gbps Total Banwidth.
- Light up 2X AHCI or Storage SATA III 6Gbps max SSD/HDD on Systems.
MAC OS,Linux and Windows
- Plug and Play on Windows XP, 7, 8.x, 10, 11(32/64bit) and Windows Server 2003, 2003R2, 2008, 2008R2, 2012, 2012R2, 2019, 2022 (32/64bit).
- Driver Free on MAC OS X and Linux Kernel Systems.
PCIE Gen 2 X1 Interface
- Based on PCIE 2.0 X1 Interface, will Works on Motherboard PCIE X1, X2, X4, X8, X16 Slot. Users Must Check If PCs Have Empty PCIE Slot.
ASMedia ASM1061 Major Chip
- Select the ASMedia ASM1061 PCIE to SATA III Host Controller.
- Will Works on AMD,ARM and INTEL Hardware Platform.
SATA III SSD/HDD Supported
- Seamless Connect to SATA III/II/I SSDs and HDDs.
- Light up 2X Max 2.5in SSD or 2.5/3.5in HDD in System.
Standard and Slim PCs Supported
- The Full Size Bracket Mounted on this PCIE SATA Card,will Works on Standard Size PCs.
- The Low Profile Bracket in the Package will Works on Slim Size PCs.
Product Description:
LTERIVER PCE-G2S2 is a PCI Express Gen 2 to SATA III (Serial ATA) 6Gbps controller. It will covert PCIE X1 signal to 2-Ports SATA III on desktop PCs and Servers. Allow users add 2X max SATA HDD/SSD on their system for Boot Up or Storage. This PCIE SATA III card will support Plug and Play on Windows, Linux and MAC OS systems, now no need to install driver anymore for PCIE SATA expansion cards.
WARNING:
1. This PCE-G2S2 PCIE SATA card no need to install driver, if PCs or Servers cannot find the added-on HDD/SSD and this device, then double check if the mother board PCIE slot is active and open. Some brand mother board may have defined PCIE function when it produced. User better call mother board manufacture locate the problem.
2. PCE-G2S2 was set on AHCI Boot Up mode. If users using the classical IDE mode, user’s PC will report BSD error. If users do not know which mode is running on PCs, follow steps as below: Windows Device Manage-IDE ATA/ATAPI Controllers- Will see “XXXX SATA AHCI controllers” or “XXX IDE controllers”.
3. PCE-G2S2 is designed on PCIE X1 interface, will works on PCIE X1, X2, X4, X8, X16 slot. Normal users better check if it has empty PCIE slot before purchase.
4. If user add the new or recovered HDD/SSD on the system, users must add this disk on system by Windows reminder in Windows Device Manager-Storage-Disk Management.
Package: 1X PCE-G2S2, 1X User Manual, 1X Low Profile Bracket, 1X Mount Screw, 2X SATA Cable
Farhana Asif
Reviewed in the United States on October 30, 2022
I have windows 7 and an MSI Z97 PC Mate mobo. One of my built-in SATA ports stopped working on the mobo. This little card was expected to work seamlessly but what I am finding is that, when I connect my hard drive to the card (tried both ports), it won't get recognized right away after the Win7 boots up. I have to go to device manager and scan for new hardware and then it will find it. This happens every time I restart my computer so its a bit annoying. I will use it for now until I rebuild my machine in a few months. I will reach out to the seller to see if they can suggest anything and may update this review based on their feedback. Thanks!
Freeman Crosby
Reviewed in the United States on January 23, 2022
Very happy, Plug & Play, no drivers needed using Windows 10, needed on a mother board with only 3 Sata ports, one dedicated to DVD drive.
Peat Moss
Reviewed in the United States on January 21, 2022
it was very cost effective and was a bit concerned about it but it has been working for months now and solved my issue.
S. Taylor
Reviewed in the United States on January 13, 2022
The PCIE card was delivered on time and it was an easy plug and play with Windows 10. I used it to and a second DVD writer and I've never had any problems with speed. So far it starts up everytime and works exactly as it should.
asmocon
Reviewed in the United States on September 30, 2021
This worked perfectly. I ran out of internal SATA connections on my system and needed to add another basic SATA drive for backup storage. This worked perfectly. The SSD I connected to it, is recognized during boot (causes a small boot delay while it turns on) and will even allow me to boot from the drive if needed.The Samsung EVO 860 I have connected appears to be running at max speed (sustained 500+MB/s) and Windows 10 had zero issues recognizing the adapter or the SSD after booting.If you need a cheap solution to add a couple more drives to your system, I would very much recommend this adapter.
Joe Black
Reviewed in the United States on December 5, 2021
The Low Profile bracket that comes with this card is not what is shown in the product photos.1. Note the position of the top mounting hole on the smaller bracket. (see photo)2. The bottom hole is about 2mm too far, meaning that with the bracket installed, there is not enough clearance, and the card will not fit.I had to butcher the full-height bracket to get the card to stay in securely. I will not be buying anything from LTERIVER again.
RJS
Reviewed in the United States on November 20, 2021
I installed this item on an older Gigabyte motherboard because I had bought it used and it had only two functioning SATA ports. After installation, the computer repeatedly crashed, sometimes even locking up the boot screen. I opened the case and unscrewed the SATA card (this purchase), whereupon I found that it was actually loose in its socket. Now, I can't recommend my solution generally, although it seems to have worked fine in this instance. I bent the metal mounting bracket of the card until the card was firmly seated in the socket AND the screw slot of the card matched up PRECISELY with the screw hole in the case, and then put in the screw. No more crashes. Enabled two more SATA connections, as desired. In my opinion, this scenario is actually an example of an inherent weakness of short PCI-e cards - - that they may not seat properly in their sockets when screwed into place.
MIGUEL CUEVAS
Reviewed in the United States on October 10, 2021
I have a older pc running on 8.1 with only 2 sata ports. Now I have 2 more .It is plug and play the pc installed drivers automatically. I installed a laptop hard drive to it it read it. I cleaned it formatted it no problems.
Recommended Products
$180.99
$ 71 .99 $71.99