Your cart is empty.
Your cart is empty.Product Description
EASY-TO-FOLLOW INSTRUCTIONS
UPGRADE YOUR REMOTE
Take your remote starter’s range from local to limitless – even halfway around the world!
Armando
Reviewed in the United States on February 9, 2025
love this remote start. super easy to install, took maybe 20mins.only thing i didnt like is that the red alarm light stays on when you are driving.
Edoardo
Reviewed in the United States on February 7, 2025
Easy to install and works awesome
Jon
Reviewed in the United States on February 28, 2025
Awesome!! Easy install. Works great!
Texas Squatch
Reviewed in the United States on January 8, 2025
This is the coolest thing ever!!!! Product was cheap and easy to install and works amazing. I would recommend this product to anybody for any vehicle. I will soon get one for the wife's car.
Texsun101
Reviewed in the United States on January 4, 2025
Before I purchased this I watched several online videos. I would recommend the same to anyone else purchasing and installing this themselves. You will need a small ratchet with 10mm socket and a T20 Torx. I struggled a little because I could not find my dedicated T20 screwdriver and was attempting to use a cheapie type screwdriver that has the changeable bits, the issue was that the shaft was too fat. After retreating to the toolbox to find my snap on ratcheting screwdriver the cover was off the bottom of the steering wheel. The plug that you remove from the module was more delicate than I expected so be careful there, the part you have to push is on the back side, I recommend a small 90 degree hook tool . Once you have the sequence down for the programming it is easy to do. One issue I had was figuring out that if you hold down the button too long the sequence starts again, let go once you see all leds turn blue otherwise it starts flashing multiple colors again. Everything is working as it is supposed to. We have not tested the range yet but I think my wife will be happy as long as it works from inside the house.
ethier’s
Reviewed in Canada on January 26, 2025
The unit is literally plug-in. Play follow the instructions and programs and works perfectly. Manufactures flaw on the Jeep Wrangler as described in the video after I remove the lower part of the column, I grind the lip down a bit more before reinstallation and it’s a perfect fit. You do not have to grind anything. I just personally did it so I wouldn’t damage the wife’s Jeep while reinstalling the lower half of the column.
Customer
Reviewed in the United States on January 20, 2025
Easy to install works great
Nathan Plant
Reviewed in the United States on January 12, 2025
I would not recommend for anyone to get this if you have a 2017 Plus Jeep Wrangler. As mentioned in some of the other reviews, there is a lip on the bottom panel of the steering wheel shroud and you cannot get it off. The pry tool that they include in their kit definitely will not work to get this off and the only way to get it off is either to take the steering wheel off or to break the shroud off. The instructions suck, you have to cut a wire, and there's a spot in the instructions where you have to check their harness to make sure that it is pinned right. Don't waste your money.
Khay ohh
Reviewed in Canada on February 4, 2024
It took me 15 min just to installed and done. My jku 07 now has a remote start..and the name on the box is MPC..but the product was actually a Evo-fortin.. but was worth it.
Scottro
Reviewed in the United States on December 28, 2024
I installed this on a 2012 Wrangler. Start to finish, it took me no longer than 10 minutes to install it. So far it has worked every time. For the money, I don't think there is a better option. The extra length of wire can just be ziptied out of the way. The wiring harness is well made as well as the control box. The label on the box could be a bit nicer but you really don't need it for anything.
Jassem
Reviewed in the United Arab Emirates on November 24, 2024
تركيبه سهل جدا ، شوف الفيديو واتبع الخطوات ١٠ دقايق وهو راكب
Snow Man
Reviewed in the United Arab Emirates on May 10, 2023
package included module, harness, kill switch and papers with QR code for online installation manual. installation is straight forward, you just have to wiggle a bit with the steering wheel lower plastic cover to get it out of the way. i used a plastic wedge set that i had. setup done right from first attempt. Make sure to cut the labeled wire if you have a wrangler. I didn't install the kill switch.Amazing feature to be added to the Jeep!
Matt
Reviewed in Australia on September 14, 2020
It works. Sometimes a rough start but handy as and great for a jaw drop from the kids. Was installed in a 2013 Jk Jeep. Had a little trouble programming it but got there the third time. Valet switch works great and have put it through hell 4wd and had no problems with it. I know some people have complained that you have to get in and still turn the ignition or it cuts off but at least the kids can’t drive off with it aswell!! Very happy with it 😈
Recommended Products
$199.99
$ 86 .99 $86.99