Your cart is empty.
Your cart is empty.Product Description
Tylor.K
Reviewed in the United States on September 11, 2024
I loaded a 80 pound canoe on the rack for a trip up north, once I got there both crossmembers were bent. The rear one is the worse. Maybe I have received a unicorn and it was just my set that are weak but I can’t say for sure unless this company sends me a new set. Will update if that’s the case.
Customer
Reviewed in the United States on August 3, 2024
This bolted directly to the truck canopy. Canopy had slight angle but worked fine. No plate but an adhesive rubber strip was provided to prevent scratches/rust. No need to caulk with this strip. So far so good
Lori Gooden
Reviewed in the United States on July 30, 2024
The headline for the ad says the cross bars are 60 inches. They are not. You have to read in the description that they are 62.99 inches ... or just buy them like I did and measure. 63 inches. These work great with the Rhino RLT 600 feet on my ARE camper shell. The bars are well built and thicker than the Rhino bars, so I had to take a trip to Lowes to buy 1/4 inch longer bolts. No big deal. I'm very impressed with how beefy they are. Trouble getting the end caps in, but it's all good. I saved a bunch of money by buying this cross bars and in my opinion better than the Rhino bars.
Nick
Reviewed in the United States on July 29, 2024
So far so good. Bought these to put on my truck camper shell for a family trip. Very easily installation and compatible with any rail system. End caps probably will come off at some point as they are just friction fit but then again I’m not looking for the $1,000 look just the utility of the roof rack. Great product.
Shaun K.
Reviewed in the United States on March 17, 2024
i used these to attatch onto my Wildtop brand truck cap on my 2020 jeep gladiatior to attatch a 270 awning. after a long serch of buyind and returning bolts from amazon i was able to get this rack to work. the supplied bolts for the rack were not long enough for my intended purpose (i needed 3" or 65MM lenght bolts) every bolt i bought the heads were not big enough to fit in the track and not spin. the factory head bolts were fine just not long enough. i ended up just drilling a hole in the rails to make my application work.The packaging was not the best, one end arrived damaged/bent from shipping (no packing foam paper or anything to stop them from sliding around in the box. they did have a plastic sleeve over then but that just kept the paint "safe"The black coating on the rails flaked off super easy, i just sprayed them with Black spray paint. and it seems to be ok.they did come with rubber "wind strips" to keep down noise but i dont notice any whistling without them, they also came with some straps and brackets but i am not using them so i cannot speak for them other then to say the seem heavy duty {maybe aluminum} bolts look like they would probally rust after a few months, i ended up using 316 grade stainless for my application to attatch.
GearInches
Reviewed in the United States on February 8, 2024
Perfect finish, seems like great quality, and it included what seems like a whole Ace Hardware store full of hardware. I have so many T-bolts and everything else left over, that I don't know what I'll do with all of it.Instead of mounting it directly to my camper shell, I matched it with a pair of Yakima HD rails, so I can fully adjust it for different loads. It's totally compatible with the Yakima rails, zero issues.
C. Farley
Reviewed in the United States on November 7, 2024
I put this on a Leer truck shell for a 2003 Chevy Silverado. The hardware seems to be good but could use some bigger washers for attaching inside the shell. The little ones you give don't provide enough enough surface area for the weight and forces that will act on the 4 bolts holding the bars in place. Honestly a 4"x1" plate would be better to help with dispersing the tension better. But the only other thing is the rubber gasket material that fits inside the channel is great but these still whistle a little bit.
Charles Termin
Reviewed in the United States on November 3, 2024
I bout this product and installed it on my car to hold my roof rack. It does a great job and is super sturdy. My only complaint is that they only sent 3 out of the 4 end caps. Now I have a sharp cross bar that is a head level. Not very safe.
Recommended Products