Your cart is empty.
Your cart is empty. Features:
• Solid brass valve for superior longevity and performance.
• Ball valve provides excellent on/off control without pressure drop.
• 3/4" NPT inlet and outlet w/ 1/2" Floor-Plate Flange fitting
• Easy 1/4-turn operation to turn on or off.
• Flat Black floor plate and key for added beauty to your fire feature.
Compatibility:
✔ Indoors
✔ Outdoors
✔ Natural Gas (NG)
✔ Propane (LP)
✔ Fireplaces
✔ Log Lighters
✔ Gas Log Sets
✔ Gas Fire Pits
Instructions:
• The main valve for the gas line supply MUST be in the closed position.
• Blow out ALL the grit, dirt or other foreign material from the gas supply line. Use a gas rated Teflon tape to seal all joints.
• Screw the gas valve onto the threaded gas supply pipe. Make sure the gas valve is in the CLOSED position.
• Run an air pressure test (2 PSI) on the system to test for leaks. Apply soap water to all the joints to signal any evidence of leakage. Turn on the main gas supply and retest for evidence of any gas leakage.
• DO NOT use excessive torque on the gas valve during installation.
joshua cunningham
Reviewed in the United States on February 18, 2025
Purchased this gas valve for a fire pit. Installed the valve but found it would not fully seal when in the closed position. Enough gas passed through the valve to keep a small flame going on the burner. Took the valve off and noticed a small gap in the seal around the ball valve that probably caused the leak. I initiated a return through Amazon and took the chance with a replacement valve versus a refund. The new valve arrived the next day. Got it installed and it works great.The free return and the quick replacement earns 4 stars. Had to take one star off for having to replace the valve in the first place.
Kurt Glathar
Reviewed in the United States on April 9, 2024
Seems well built only time will tell
Pinser
Reviewed in the United States on June 7, 2023
Well built with nice finish. First time cracking open the valve was very hard…. Recommend putting the ball valve body in a vise and using a regular wrench to break it off it’s seat. Once that’s done the first time it’s easy to turn with the supplied key wrench.
Mr. Sunny
Reviewed in the United States on November 10, 2023
Good quality ball valve which does the job ver well. The ball valve was very tight initially; it literally hurt my hand while trying to turn it open but got better slightly better overtime. Turning anti-clockwise will open the flow valve and clockwise will shut off the gas flow.After we did the plumbing with inlet on one side and outlet on the other side; we closed the ball valve and pumped air into the mainline to ensure there were no leaks followed by spraying soap water. Feels solid and works solid comes with a ~ 9” key.
perep
Reviewed in the United States on March 29, 2022
sent it back for EXCHANGE as there is tiny bit of gas leaking through when closed, hope new one does the trick
Anthony Leeper
Reviewed in the United States on January 20, 2022
Bought it for a natural gas fire pit. Looks like I will get many years of use out of it.
greg
Reviewed in the United States on February 21, 2021
This Midwest Hearth fire pit key valve is exactly what I needed for a full bore key valve. It doesn’t reduce the size of the opening like most key valves (see my photos). It’s a tight valve which insures no leaking. If you want a key valve that easy to turn, you might be looking at leaking issues in the future. This valve is exactly what I wanted. I included several photos with a tape measure so you can see the exact dimensions.
gcruise15
Reviewed in the United States on April 18, 2020
Update: 8/18/2020Great valve! Great customer support! Required extra leverage to break the ball valve free from factory. Works like a charm now.Just opened the ball valve and it is missing the ball valve. Major bummer since I was planning on installing it this weekend. Hope the replacement works!Update (4/21/2020):Received the replacement with the same issue🤦🏻♂️👎🏼😡
Recommended Products
