Your cart is empty.
Your cart is empty.Product Description
Note: Use the type-c interface for power supply or while measuring small pF capacitance, the reading maybe interfered by environmental noise. Then you can try to connect a grounding cable to ground, like metal water pipe. Caution! Please discharge the capacitor before measuring.
Alignimals MF470 automatic ranging capacitance meter.
- Using a 128X64 dot matrix LCD display, it can display 5 digits readings. The measurement range is large, with a capacitance of 0.01pF to 470F (470,000,000uF).
- New Farad (supercapacitor) measurement range of 47mF to 470F. Provide a wide range of applications from DIY enthusiasts to professional engineers.
- MF470 has the characteristics of fast reading speed and accuracy of up to 1%. Reading 2200uF only takes about 0.2s.
- Capacitance tolerance estimation, showing the percentage deviation between the nominal value and the actual value. The internal resistance ESR value of a capacitor can be estimated to determine its performance.
- It has PC software to support users for real-time data analysis and storage. Widely used in audio DIY testing, home appliance maintenance, engineer development and design, batch quality inspection of capacitors, analysis of capacitor characteristics, etc.
PC connection
It has PC software support for real time analysis and storing data
Type-C power supply
External type-c power supply and PC connection
Auto and Manual range
Support AUTO range and manual range selection
1 key zero
pF level capacitance testing, one key zero operation, eliminating small parasitic capacitance
Capacitance tolerance estimation
Displays the percentage deviation between the nominal value and the actual value
ESR internal resistance measurement
Rough measurement of ESR value of electrolytic capacitor and farad capacitor
Farad measurement
Up to 470F super capacitor, some farad may have internal resistance up to 70ohm, MF470 displays the ESR.
Fast testing speed
MF470 have fast reading speed . Reading a 2200uF only take ~0.2s
Application
Measure starting capacitor 20uF
Measure 5X6800uF electrolytic capacitors in parallel
Measure 6pcs 500F Farad capacitors in series
Cliente de Kindle
Reviewed in the United States on March 3, 2025
Excelente, igual a la descripción
Ed P
Reviewed in the United States on February 4, 2025
I needed something that would measure larger capacitors and ESR is a bonus. Works beautifully. Would not hesitate to recommend.
Allie
Reviewed in the United States on February 19, 2025
This works surprisingly well for me, and the battery has never died on me. Extremely easy to use and you can even use multimeter leads. Small and compact with a bright screen that you can see over the LEDS in your workspace.
Alignimals capacitor tester
Reviewed in the United States on January 6, 2025
It’s a god tester, useful
gt46l
Reviewed in the United States on August 8, 2024
I used this device to help me repair a car stereo with a bad cd changer input(that I use as an aux port). I fully disassembled it down to the circuit board and found a bunch of capacitors had leaked onto the board. Thankfully it had not been long and the corrosion was minimal. I tested all the caps on the board, but only 70% of them could be tested directly on the board (meaning "in-circuit"). The rest had to be removed from the board to be tested. Looking at it one way it saved me a lot of time testing if I'd had to unsolder them all. On the other hand, my expectation was that it could properly test in-circuit so it ended up taking way longer than I had expected. In the end I replaced all the bad caps and the cd-changer input works correctly again. It was cheap enough to be useful for a hobbyist, but I'd think long and hard about buying it again versus a better unit that can test in-circuit. We are talking hours longer for diagnosis, and you'd better have replacement caps on hand if you screw any up desoldering them.
JoePro
Reviewed in the United States on August 31, 2024
I purchased this to verify any questionable capacitors. It is priced really good and I wasn't expecting a lot but I was surprised at how well it actually works. Really simple to use and fairly accurate.Many years ago I had a very expensive Sencore tester it was designed for in circuit testing not sure if this would do that but I really don't need it to. If your looking for a low cost tester this will do the job.
Tutor Turtle
Reviewed in the United States on June 7, 2024
Didn't know what to expect from such an inexpensive meter (professional C meters run from the high $100's to $1000's). Leads are short, but they are banana and you can use longer leads and calibrate for them, nice touch. Highly recommend for the $, if you are not in a research laboratory environment that requires MIL-Spec calibration.
Connor
Reviewed in Canada on December 3, 2024
This product seems to be made with passion. and it's quite accurate.
trt services
Reviewed in the United States on November 18, 2024
would not buy again - purchased sept 2024 and its nov 18th, 2024 and its not working amazon return policy has expired
Recommended Products
$36.78
$ 17 .99 $17.99