Your cart is empty.
Your cart is empty.The 115003M Phillips #2 magnetic driver bit features a patented magnetic collar design, strong fastener holding power, Black Oxide finish for added corrosion resistance and a 1/4 in. Quick-change impact ready shaft. Patented magnetic collar design. Strong fastener holding power. Manufactured with high quality S2 steel. Black oxide finish for added corrosion resistance.
Paul Charron
Reviewed in Canada on September 27, 2024
Very good and strong đđ
Remmy Cornelius
Reviewed in the United States on July 13, 2024
Using for framing you will damage it so fast.
stan
Reviewed in the United States on December 28, 2024
Finally, a magnetic bit that really works!
Gary Riding
Reviewed in the United States on November 19, 2024
I'm constantly buying these bits, I'm a drywall contractor and these workout really well in my drill, not for heavy duty stuff but for minor stuff these work out really good
Lori and Vince
Reviewed in the United States on January 29, 2024
They hold screws really nicely. Magnet works great to retain the screw. I have tried others, but like these the best.
wadie
Reviewed in the United States on April 1, 2024
Solid magnet. It moves up and down the bit shaft ever so slightly to accommodate different screw heads. Used daily for weeks and still going strong with first bit. Magnet will pick up metal shavings if youâre using self tappers through metal.
Josue LĂłpez
Reviewed in Mexico on April 27, 2023
Buen agarre y excelente material
Justin Brought
Reviewed in the United States on July 4, 2021
This is by FAR, the best driver bit I have ever used!!!For those bad reviews saying it drives the screw too far, it does. But a little bit of skill will stop that.I am using 3â drywall screws driving thru 1/2â drywall, plaster and lathe, then driving into 120 year old studs. Regular Dewalt drivers will not run these screws without major stress. This one holds and bites the screws flawlessly.Thank you for making such a great product!!
epeltz
Reviewed in the United States on July 4, 2019
Not sure why another poster said these are not magnetic - they come with a magnetic collar that is quite strong. If your use case allows you to use a bit with a collar, then these should work well for you. I would say they work for about 80%-90% of the things I need them for. If I need a regular bit (with no collar), then swap them out.I have owned the Hitachi version and the newer Metabo version. They are the same product, no difference at all. Over time, the collars have a tendency to fall off and the tip does feel a bit softer than some other products, so these may not be the right choice if you are a contractor and need to use them with hundreds or thousands of screws per day. For the consumer/prosumer whose primary need is a home shop or "regular" duty, these work great. Since they have a collar, they are not great for tight spaces, but I have other products to take care of that use case.
gcamarena
Reviewed in Mexico on May 25, 2018
EN UN PAR DE DIAS SE DESPRENDIERON LOS AROS DE ALUMINIO, NO SON PARA NADA DURADEROS, EL ALUMINIO SE MARCA FACILMENTE AL TRAERLOS EN EL ESTUCHE DE TORNILLOS, LA FUERZA DEL IMAN ESTA BIEN PERO LA CALIDAD NO ES PARA MUCHO TIEMPO DE USO,
mr m j hughes
Reviewed in the United Kingdom on December 13, 2018
Great piece of kit stop the screw going in to far magnet a brilliant idea trying to hold the screw in place in a confined space with your fingers not a good idea just use this youâll never be with out it
Trung nguyen
Reviewed in Australia on November 21, 2018
Very good screw bit, like it
Justin D Ozone
Reviewed in the United States on June 23, 2015
I have used magnetic capture bits from all the usual sources over the past 30 years and these are by far the best of breed. I purchased a pair of square drive and a pair of #2 Philips drive to try and because of their outstanding performance have since reordered quantities of both. Since my original purchase I have built two decks. One 12'x26' using over 1,200 stainless steel Philips screws and another 10'x20' requiring about 700 coated square drive fasteners. These bits worked flawlessly and in both cases I only had to use a single bit that still has a lot of service left in it. Cam outs occurred infrequently, only at extreme angles, and resulted in no bit damage or reamed fasteners. The screws almost seem to jump into place on the bit and I never had one fall off the bit or become misaligned. The powerful magnet and the well designed collar work together to center the screw-head on the bit and keep it there without any play/wobble when you start to drive the screw. I have a sheetrock project this weekend and expect to have many instances where I'm holding the drywall in place with one hand while trying to drive a screw with the other. I expect these bits to be a real time and frustration saver.
Recommended Products
$24.90
$ 11 .99 $11.99