Your cart is empty.
Your cart is empty.James
Reviewed in the United States on March 3, 2025
I could have gone with a 3D printed version, and I debated it. But for the price, you should go with the injection molded version. It feels much more premium and is super sturdy. The magnets are super strong and it installed perfectly onto my hex driver. The rubber surface is also great for holding the random couple screws you need in a pinch. 10/10 would buy again and probably will.
James
Reviewed in the United States on March 3, 2025
I could have gone with a 3D printed version, and I debated it. But for the price, you should go with the injection molded version. It feels much more premium and is super sturdy. The magnets are super strong and it installed perfectly onto my hex driver. The rubber surface is also great for holding the random couple screws you need in a pinch. 10/10 would buy again and probably will.
Made for a child?
Reviewed in the United States on February 28, 2025
I still have it on my drill 2 years later. One magnet fell out. Sometimes bits fall out. Make sure to use locktight on the screw. Overall pretty good product
Made for a child?
Reviewed in the United States on February 28, 2025
I still have it on my drill 2 years later. One magnet fell out. Sometimes bits fall out. Make sure to use locktight on the screw. Overall pretty good product
steve fuller
Reviewed in the United States on February 13, 2025
I definitely consider this an upgrade to my impact as well as my hammer drill. Iโve got a combo of this unit on one side then the magnetic bit holder (also from Simon tools) on the other side. Super useful combination, six bits should cover most things I encounter on the one side, then screws and drill bits on the other side (see pic). The plastic construction on the unit is pretty tough with a rubberized magnetic section (magnet is little weak). The rubber magnetic patch will hold a number of loose screws as well. The magnets in the slots are very strong, no worries about tips coming out. I really love not having to grab a box of tips when I need my drill for something. I keep a couple of adapters, Phillips, and a torx bit in there.. maybe a slotted.Itโs become one of those tools you canโt imagine not having. Just an extension of the drill. I read where someone wrote that the drill becomes top heavy. I havenโt had that issue myself and I thought I would. The drills having remained fairly balanced. Full disclosure I am using the larger bottom batteries, 3.0 and higher I believe.. that helps balance the drill.Iโm a new fan of Simon Tools!
steve fuller
Reviewed in the United States on February 13, 2025
I definitely consider this an upgrade to my impact as well as my hammer drill. Iโve got a combo of this unit on one side then the magnetic bit holder (also from Simon tools) on the other side. Super useful combination, six bits should cover most things I encounter on the one side, then screws and drill bits on the other side (see pic). The plastic construction on the unit is pretty tough with a rubberized magnetic section (magnet is little weak). The rubber magnetic patch will hold a number of loose screws as well. The magnets in the slots are very strong, no worries about tips coming out. I really love not having to grab a box of tips when I need my drill for something. I keep a couple of adapters, Phillips, and a torx bit in there.. maybe a slotted.Itโs become one of those tools you canโt imagine not having. Just an extension of the drill. I read where someone wrote that the drill becomes top heavy. I havenโt had that issue myself and I thought I would. The drills having remained fairly balanced. Full disclosure I am using the larger bottom batteries, 3.0 and higher I believe.. that helps balance the drill.Iโm a new fan of Simon Tools!
Dan Lion Palazzolo
Reviewed in the United States on February 12, 2025
Very good attachment to the M12 Surge impact driver I got. It serves good utility and completes the impact driver. Very satisfied. Thanks to seller for providing such an excellent product.
Dan Lion Palazzolo
Reviewed in the United States on February 12, 2025
Very good attachment to the M12 Surge impact driver I got. It serves good utility and completes the impact driver. Very satisfied. Thanks to seller for providing such an excellent product.
Customer
Reviewed in the United States on January 31, 2025
The bit holder was a great fit to my m18 fuel driver the magnets are strong and the bits don't move or get lose from the holder when in use I have been a carpenter for over 40 years and supervisor of construction crews and this is the best I've found for convenience and ease ability to use I would approve this to all, great product.
Customer
Reviewed in the United States on January 31, 2025
The bit holder was a great fit to my m18 fuel driver the magnets are strong and the bits don't move or get lose from the holder when in use I have been a carpenter for over 40 years and supervisor of construction crews and this is the best I've found for convenience and ease ability to use I would approve this to all, great product.
Vanz
Reviewed in Canada on January 15, 2025
Fits like a glove and very handy.
Vanz
Reviewed in Canada on January 15, 2025
Fits like a glove and very handy.
Jason Derringer
Reviewed in the United States on January 13, 2025
I absolutely love how the colors match the tool perfectly! All the magnets for the retention are very strong and I have seen no issues with anything falling out. I haven't thoroughly tested the outer magnet for screws and such but it seems pretty strong. The only problem I had was the included mounting screw. It seems to be either the wrong length, off by maybe a millimeter, or it's not exactly the right thread. It either bottomed out or bound up and the head snapped off. A perfect fit is 6/32 thread and 1/2 inch in length. Maybe my specific driver had a more shallow hole, I really don't know but with the new screw, works awesome!
Jason Derringer
Reviewed in the United States on January 13, 2025
I absolutely love how the colors match the tool perfectly! All the magnets for the retention are very strong and I have seen no issues with anything falling out. I haven't thoroughly tested the outer magnet for screws and such but it seems pretty strong. The only problem I had was the included mounting screw. It seems to be either the wrong length, off by maybe a millimeter, or it's not exactly the right thread. It either bottomed out or bound up and the head snapped off. A perfect fit is 6/32 thread and 1/2 inch in length. Maybe my specific driver had a more shallow hole, I really don't know but with the new screw, works awesome!
FL Buyer
Reviewed in the United States on June 25, 2024
Functionality, size, quality are top notch. The attachment screw was too large for my Fuel Surge driver. Went with a much smaller screw with a washer.
FL Buyer
Reviewed in the United States on June 25, 2024
Functionality, size, quality are top notch. The attachment screw was too large for my Fuel Surge driver. Went with a much smaller screw with a washer.
Customer
Reviewed in the United States on June 14, 2024
This accessory is pretty neat. It holds several bits to avoid wasting time searching for the right one, without taking up too much space. The M12 impact is a small, lightweight tool that I keep on me all day for most tasks, and this device maximizes its efficiency. There is a magnet that can hold a few screws. Itโs not super strong, but can hold 4-5 drywall screws to get a sheet started. Some small bits, like the T-20 and drywall bit, can be challenging to remove, and occasionally the holder gets in the way in tight spaces, but those are the only downsides. Itโs easy to install and remove. I also have an M12 hammer drill; it looks like this would fit on that as well if you shave off the small tab at the top of the back, but maybe there is a better option for that drill. Overall, very happy with it after 6 months.
Customer
Reviewed in the United States on June 14, 2024
This accessory is pretty neat. It holds several bits to avoid wasting time searching for the right one, without taking up too much space. The M12 impact is a small, lightweight tool that I keep on me all day for most tasks, and this device maximizes its efficiency. There is a magnet that can hold a few screws. Itโs not super strong, but can hold 4-5 drywall screws to get a sheet started. Some small bits, like the T-20 and drywall bit, can be challenging to remove, and occasionally the holder gets in the way in tight spaces, but those are the only downsides. Itโs easy to install and remove. I also have an M12 hammer drill; it looks like this would fit on that as well if you shave off the small tab at the top of the back, but maybe there is a better option for that drill. Overall, very happy with it after 6 months.
Fernando Cesar
Reviewed in Mexico on December 31, 2024
Cumple con lo que promete, de buen material, ya habรญa intentado con otros productos y este es el mejor, estoy muy satisfecho
Fernando Cesar
Reviewed in Mexico on December 31, 2024
Cumple con lo que promete, de buen material, ya habรญa intentado con otros productos y este es el mejor, estoy muy satisfecho
Misty
Reviewed in the United Kingdom on December 22, 2024
Excellent quality bit holder for GEN 2 Milwaukee M12 impact driver, holds 3-25mm bits and 3-50mm bits .Fits on the Driver like it belongs there.Saves time looking for bits, bits hold firm with the magnetic holders.Takes a little longer to arrive coming from the US.Many thanks ๐.
Misty
Reviewed in the United Kingdom on December 22, 2024
Excellent quality bit holder for GEN 2 Milwaukee M12 impact driver, holds 3-25mm bits and 3-50mm bits .Fits on the Driver like it belongs there.Saves time looking for bits, bits hold firm with the magnetic holders.Takes a little longer to arrive coming from the US.Many thanks ๐.
็ฒ็ใใใใตใจใ
Reviewed in Japan on October 31, 2024
ใใกใใฏ่ฒซ้ๅผ3ๆฌใฎใใซใใผใงใฏใชใใ้่ฒซ้ๅผใฎ6ๆฌใใซใใผใงใใใชใฎใง็้ ญใใใใใในใใใใใฆๅ
้ปใใชใซใฎๅ ดๅใฏweraใฎใฉใใใใขใใใฟใผใไฝต็จใใไบใงใใใชใในใใผใใชๅใพใใซใชใใพใใใในใใช้ทใใฏใชใขใฏ30mmใใใญใณใใฏ50mmใงใใ้ใซ้ทใใใใใใใชใซ็ญใฏๅพใใซ้ฃใณๅบใใใ้ใใง่ฝไธใฎๅฑ้บใใใใพใใใใชใซไปฅๅคใฎใใใใใกใคใณใงไฝฟใใฎใงใใใฐใๆฏ้weraใฎใฉใใใใขใใใฟใผใจไฝต็จใใฆไฝฟ็จใใไบใใชในในใกใใพใใใใชใซใกใคใณใชใใใกใใฎๅใฏไธๅใใงใใ
็ฒ็ใใใใตใจใ
Reviewed in Japan on October 31, 2024
ใใกใใฏ่ฒซ้ๅผ3ๆฌใฎใใซใใผใงใฏใชใใ้่ฒซ้ๅผใฎ6ๆฌใใซใใผใงใใใชใฎใง็้ ญใใใใใในใใใใใฆๅ
้ปใใชใซใฎๅ ดๅใฏweraใฎใฉใใใใขใใใฟใผใไฝต็จใใไบใงใใใชใในใใผใใชๅใพใใซใชใใพใใใในใใช้ทใใฏใชใขใฏ30mmใใใญใณใใฏ50mmใงใใ้ใซ้ทใใใใใใใชใซ็ญใฏๅพใใซ้ฃใณๅบใใใ้ใใง่ฝไธใฎๅฑ้บใใใใพใใใใชใซไปฅๅคใฎใใใใใกใคใณใงไฝฟใใฎใงใใใฐใๆฏ้weraใฎใฉใใใใขใใใฟใผใจไฝต็จใใฆไฝฟ็จใใไบใใชในในใกใใพใใใใชใซใกใคใณใชใใใกใใฎๅใฏไธๅใใงใใ
Julio C.
Reviewed in Mexico on October 13, 2023
Es el mejor portador de puntas del mercado. Vale cada centavo! Sin duda esta fue una muy buena compra. Los imanes son muy buenos, facilita y agiliza el trabajo 10 de 10
Julio C.
Reviewed in Mexico on October 13, 2023
Es el mejor portador de puntas del mercado. Vale cada centavo! Sin duda esta fue una muy buena compra. Los imanes son muy buenos, facilita y agiliza el trabajo 10 de 10
Recommended Products
