Your cart is empty.
Your cart is empty.LOCTITE® 567 is an off-white, low strength, thixotropic methacrylate thread sealant. It cures in the absence of air and by contact with metals when confined within threads up to M80/R3”. It is best suited for use on coarse metal threads and its breakaway torque rating is 1.7Nm. Viscosity is 280,000 - 800,000 mPa·s and service temperature -65° to +400°F (-55° to +200ºC). UL approved.
Eshwar Chary
Reviewed in India on January 8, 2025
Ok
Eshwar Chary
Reviewed in India on January 8, 2025
Ok
Train Man
Reviewed in the United States on July 25, 2024
Works well, Be sure to kneed the tube before use as it separates in storage.
Train Man
Reviewed in the United States on July 25, 2024
Works well, Be sure to kneed the tube before use as it separates in storage.
daniel ledbetter
Reviewed in the United States on June 13, 2024
Best general purpose pipe sealant. Use it for most everything except steam. Only because there are better products for steam.
daniel ledbetter
Reviewed in the United States on June 13, 2024
Best general purpose pipe sealant. Use it for most everything except steam. Only because there are better products for steam.
Chevy Man
Reviewed in the United States on March 20, 2024
Sealed NPT threads on an automotive fuel line, with no leaks. Before, when I didn't use the sealer, I had seepage.
Chevy Man
Reviewed in the United States on March 20, 2024
Sealed NPT threads on an automotive fuel line, with no leaks. Before, when I didn't use the sealer, I had seepage.
Just a welder guy
Reviewed in the United States on October 7, 2024
This is the only thing I will use on stainless. It flat works.
Just a welder guy
Reviewed in the United States on October 7, 2024
This is the only thing I will use on stainless. It flat works.
Rob
Reviewed in the United States on October 28, 2024
Had to use this on numerous 1" SS joints and it worked perfectly. I made a test joint and it was rock solid. Part of the test included loosening the cured joint which required a cheater extension on the wrench but I was able to get the joint apart... there was no galling. Isopropl worked very well to remove excess uncured and cured sealer.
Rob
Reviewed in the United States on October 28, 2024
Had to use this on numerous 1" SS joints and it worked perfectly. I made a test joint and it was rock solid. Part of the test included loosening the cured joint which required a cheater extension on the wrench but I was able to get the joint apart... there was no galling. Isopropl worked very well to remove excess uncured and cured sealer.
Christopher J. Pratt
Reviewed in the United States on January 3, 2024
Anyone who works with pipe thread fittings should have a tube of this on hand. Works great.
Christopher J. Pratt
Reviewed in the United States on January 3, 2024
Anyone who works with pipe thread fittings should have a tube of this on hand. Works great.
Customer
Reviewed in the United Kingdom on July 8, 2022
Excellent product for thread sealing.
Customer
Reviewed in the United Kingdom on July 8, 2022
Excellent product for thread sealing.
DWG
Reviewed in the United States on December 13, 2022
For anyone doing steam fittings this is great stuff. We have been putting in a low-pressure steam boiler with a significant amount of piping and have found Locktite 567 to be excellent, good enough that we have purchased another 350ml can.
DWG
Reviewed in the United States on December 13, 2022
For anyone doing steam fittings this is great stuff. We have been putting in a low-pressure steam boiler with a significant amount of piping and have found Locktite 567 to be excellent, good enough that we have purchased another 350ml can.
Stefano
Reviewed in the United States on July 22, 2021
I had a sink in which both hot and cold brass connections to the taps were leaking. I tried different solutions for several months. Teflon tape, polyurethane sealant, pfte dope (white and yellow).. etc. they all leaked. Clearly the connectors were not threaded correctly. Anyway, I got this loctite sealant, and applied/spread generously on the threades. Then I tighted the couplers with 2 wrenches. Finally after 24 hours of cure time I reconnected the water and checked for leaks. Nothing. All super dry. Perfect. From now on I will consider this product also in many other applications.
Stefano
Reviewed in the United States on July 22, 2021
I had a sink in which both hot and cold brass connections to the taps were leaking. I tried different solutions for several months. Teflon tape, polyurethane sealant, pfte dope (white and yellow).. etc. they all leaked. Clearly the connectors were not threaded correctly. Anyway, I got this loctite sealant, and applied/spread generously on the threades. Then I tighted the couplers with 2 wrenches. Finally after 24 hours of cure time I reconnected the water and checked for leaks. Nothing. All super dry. Perfect. From now on I will consider this product also in many other applications.
Debra Myers
Reviewed in Canada on May 16, 2020
My husband uses this product all the time, we love it. A bit costly but the product works and the seller shipped right away!
Debra Myers
Reviewed in Canada on May 16, 2020
My husband uses this product all the time, we love it. A bit costly but the product works and the seller shipped right away!
sergio gutierrez
Reviewed in Mexico on March 30, 2020
Excelente para tuberias de gas incluso helio, probado en tuberias de agua hasta 10 bares sin problemas
sergio gutierrez
Reviewed in Mexico on March 30, 2020
Excelente para tuberias de gas incluso helio, probado en tuberias de agua hasta 10 bares sin problemas
Mike Cerny
Reviewed in Canada on December 25, 2020
Great for assembling gas lines
Mike Cerny
Reviewed in Canada on December 25, 2020
Great for assembling gas lines
Recommended Products
