Shopping Cart

Your cart is empty.

Your cart is empty.

LED Display Voltmeter, Voltage Tester Current Detector Square 22mm Dual Display Panel Voltmeter Ammeter AC 0-100A 60-500V Meter Indicator (Blue)

Free shipping on orders over $29.99

$12.29

$ 6 .99 $6.99

In Stock

About this item

  • 【Multiple Colors】: 100% Brand new and high quality. There are four colors of voltage meter , you can choose any color you like.
  • 【Accurate And Stable】: Voltage current detector has beautiful appearance, high measurement accuracy and stable working performance.
  • 【Keep Abreast Of Voltage】: Digital voltage measuring instrument is small, exquisite workmanship, long service life. Volt monitor uses an LED digital display tube for clear display, and you can see the real-time voltage through the display.
  • 【High Quality】: Clear display, easy to use. Voltage tester is made of high quality materials, exquisite workmanship and long service life.
  • 【Measuring Range】: LED display instrument has a wide measuring range of AC 60-500V and 0-100A.



Product Description

1

Features:

  1. Small, exquisite workmanship, long service life.
  2. Clear display, easy to use.
  3. High accuracy, and stable working performance
  4. LED Display meter has wide measurement range of 60-500V, and 0-100A

1

1

1

1

1

1

Specification:

  • Material: plastic
  • Color:Red, white, blue, green(Optional)
  • Installation size: Approx. 22mm/0.87"
  • Accuracy: ±2%
  • current range: 0-100 (A)
  • Measurement range :60-500 (V)
  • Input voltage :60-500 (V)
  • Output voltage :0 (V)

  • Ambient temperature: 0 to 50 (℃)
  • Size: Approx. 15*9cm/5.9*3.5in
  • Weight: Approx.47g~50g/1.7oz~1.8oz

Note:

Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

Package list:

  • 1 x LED Display Voltmeter

José A Jimenez
Reviewed in the United States on February 1, 2025
Very Good for the house electrician
José A Jimenez
Reviewed in the United States on February 1, 2025
Very Good for the house electrician
Terry H. Williams
Reviewed in the United States on January 24, 2025
Worked perfectly - The toaster DOES actually draw 11.1 Amps.
Terry H. Williams
Reviewed in the United States on January 24, 2025
Worked perfectly - The toaster DOES actually draw 11.1 Amps.
Jacoumie
Reviewed in Canada on January 16, 2025
Recommended
Jacoumie
Reviewed in Canada on January 16, 2025
Recommended
Farasat Chaudhry
Reviewed in the United States on March 20, 2024
Display gone,Cheap
Farasat Chaudhry
Reviewed in the United States on March 20, 2024
Display gone,Cheap
Dany B.
Reviewed in Mexico on April 23, 2024
The media could not be loaded.
Dany B.
Reviewed in Mexico on April 23, 2024
The media could not be loaded.
Captain Eric
Reviewed in the United States on April 11, 2024
Perfect for seeing the voltage of our service cable
Captain Eric
Reviewed in the United States on April 11, 2024
Perfect for seeing the voltage of our service cable
Customer
Reviewed in the United States on September 24, 2023
I wanted a live readout on my electrical panel for my solar install. I found this while searching among rectangular ones and such. Could it be real? I only had to drill out a 22mm round hole? No way! One drill and a stepper bit and I had this beautiful thing installed into the face of my panel even before the surrounding metal cooled down. A small gripe was the lack of details to install it, but X1 and X2 for the voltage and the CT for amps. I used a 14 gauge standard SAE quick connector cable for the voltage leads to an unused breaker. The CT was installed with my 1/0 feeder cable and while it's quick connector is nice, it could be a tad longer though. With both of the sampling leads quick disconnecting types, I can remove my panel front without worry about holding it while working inside the box.Now I can witness the live readout of what's really going on in my solar grid and backup panels. It is so simple and didn't hurt my budget at all. I only had to connect two wires. Do note that this will not work on a 200A main service panel nor would the CT fit with 4/0 cabling. But for a sub panel or a feeder below 100A this works perfectly. The accuracy is decent and within a volt and amperage is roughly the same. I use these as a quick visual of the system status.
Customer
Reviewed in the United States on September 24, 2023
I wanted a live readout on my electrical panel for my solar install. I found this while searching among rectangular ones and such. Could it be real? I only had to drill out a 22mm round hole? No way! One drill and a stepper bit and I had this beautiful thing installed into the face of my panel even before the surrounding metal cooled down. A small gripe was the lack of details to install it, but X1 and X2 for the voltage and the CT for amps. I used a 14 gauge standard SAE quick connector cable for the voltage leads to an unused breaker. The CT was installed with my 1/0 feeder cable and while it's quick connector is nice, it could be a tad longer though. With both of the sampling leads quick disconnecting types, I can remove my panel front without worry about holding it while working inside the box.Now I can witness the live readout of what's really going on in my solar grid and backup panels. It is so simple and didn't hurt my budget at all. I only had to connect two wires. Do note that this will not work on a 200A main service panel nor would the CT fit with 4/0 cabling. But for a sub panel or a feeder below 100A this works perfectly. The accuracy is decent and within a volt and amperage is roughly the same. I use these as a quick visual of the system status.
Ricardo
Reviewed in Mexico on December 22, 2023
Todo bien y llegó en la fecha mencionada, gracias.
Ricardo
Reviewed in Mexico on December 22, 2023
Todo bien y llegó en la fecha mencionada, gracias.
Rejean Gervais
Reviewed in Canada on December 14, 2023
parfait pour un montage et assez precis
Rejean Gervais
Reviewed in Canada on December 14, 2023
parfait pour un montage et assez precis
Customer
Reviewed in the United States on January 16, 2023
Simple to install, inexpensive to purchase.
Customer
Reviewed in the United States on January 16, 2023
Simple to install, inexpensive to purchase.
JawaExtra
Reviewed in the United States on August 9, 2022
Directions are a little lacking, but you probably have a good idea how to wire this in if you’re considering it. Reasonably accurate (all within 0.2 amps of my meter), definitely bright enough for indoor use. My only real complaint is wiring length for the hall sensor. You can extend them, but now you’re soldering 4 joints or crimping 4 splices. However at this price point that’s not a dealbreaker.
JawaExtra
Reviewed in the United States on August 9, 2022
Directions are a little lacking, but you probably have a good idea how to wire this in if you’re considering it. Reasonably accurate (all within 0.2 amps of my meter), definitely bright enough for indoor use. My only real complaint is wiring length for the hall sensor. You can extend them, but now you’re soldering 4 joints or crimping 4 splices. However at this price point that’s not a dealbreaker.
Pascal
Reviewed in Canada on December 20, 2022
Recue endomager lecran est craquer
Pascal
Reviewed in Canada on December 20, 2022
Recue endomager lecran est craquer
Jimmy L Miller
Reviewed in the United States on November 24, 2021
Perfect in my application
Jimmy L Miller
Reviewed in the United States on November 24, 2021
Perfect in my application