Your cart is empty.
Your cart is empty. YXQ 0-300mA Analog Current Panel 85C1-mA Amp Ammeter Gauge Meter 2.5 Accuracy for Auto Circuit Measurement Tester
Conditions of use: humidity 20-50 ° C (relative humidity Withstand voltage: can withstand positive arc waveform AC 50Hz, 2KV per minute test
Measures current tool with accuracy of Class 2.5 ,Clear and easy to read scale and a button for fine tuning the dial
jimmy
Reviewed in the United States on January 7, 2025
fit like a top works great
jimmy
Reviewed in the United States on January 7, 2025
fit like a top works great
James C Lamborn
Reviewed in the United States on September 8, 2024
I'm using these to monitor the float voltage on lead acid batteries, which is 13.5 volts. When I applied 13.5 volts, they all read almost 14, which is right at the edge of the claimed 2.5% accuracy. So, I used the zero adjust to set them at 13.5, when 13.5 was applied. I used my calibrated H P 6.5 digit bench meter as a reference. Considering the cost, they'll work just fine for what I'm doing. If you're looking for more than 2.5% accuracy, keep looking; and, be prepared to spend a lot more money.
James C Lamborn
Reviewed in the United States on September 8, 2024
I'm using these to monitor the float voltage on lead acid batteries, which is 13.5 volts. When I applied 13.5 volts, they all read almost 14, which is right at the edge of the claimed 2.5% accuracy. So, I used the zero adjust to set them at 13.5, when 13.5 was applied. I used my calibrated H P 6.5 digit bench meter as a reference. Considering the cost, they'll work just fine for what I'm doing. If you're looking for more than 2.5% accuracy, keep looking; and, be prepared to spend a lot more money.
Kooljeep5
Reviewed in the United States on July 14, 2024
Works great to build a test meter for electronics. Good price. I will buy more.
Kooljeep5
Reviewed in the United States on July 14, 2024
Works great to build a test meter for electronics. Good price. I will buy more.
Ed. Chmielewski
Reviewed in the United States on May 8, 2024
Put it on a lawn tractor
Ed. Chmielewski
Reviewed in the United States on May 8, 2024
Put it on a lawn tractor
Robert Uecker
Reviewed in the United States on November 10, 2024
Had to remove it from the circuit.Cheap Junk
Robert Uecker
Reviewed in the United States on November 10, 2024
Had to remove it from the circuit.Cheap Junk
rodger
Reviewed in the United States on April 10, 2024
everything was nice , packed well , just what i needed............
rodger
Reviewed in the United States on April 10, 2024
everything was nice , packed well , just what i needed............
John Colorado
Reviewed in the United States on August 2, 2023
Was having trouble with starting my tractor. Used a voltmeter and found that occasionally voltage to starter solenoid was only 8v. Bought this set of 3 voltmeters and made a panel, with connections to three different places in circuit. Found cutout relay at fault. Easy to read and consistent. 15v range.
John Colorado
Reviewed in the United States on August 2, 2023
Was having trouble with starting my tractor. Used a voltmeter and found that occasionally voltage to starter solenoid was only 8v. Bought this set of 3 voltmeters and made a panel, with connections to three different places in circuit. Found cutout relay at fault. Easy to read and consistent. 15v range.
Rick S
Reviewed in the United States on November 27, 2023
Arrived as pictured and seems to be within one amp of accuracy when compared to other meters in the same circuit. Would have been nice if it had instructions as to which terminals get wired to the upstream and downstream side of the shunt. No documents at all for connecting. Should have four mounting screws at each corner so it can be mounted to a plate more and more easily centered.
Rick S
Reviewed in the United States on November 27, 2023
Arrived as pictured and seems to be within one amp of accuracy when compared to other meters in the same circuit. Would have been nice if it had instructions as to which terminals get wired to the upstream and downstream side of the shunt. No documents at all for connecting. Should have four mounting screws at each corner so it can be mounted to a plate more and more easily centered.
Recommended Products
