Your cart is empty.
Your cart is empty.Keeper 05674-6 Do It Yourself Ramp Kit, Black - Safely Load Motorcycles, Tractors, ATVs, and Other Wheeled Transports On and Off Your Vehicle
Linda Macey
Reviewed in the United States on August 27, 2024
Plenty thick enough, should last long time, one nut was stripped
RayW
Reviewed in the United States on May 28, 2024
Although they sell this as a motorcycle ramp, I use it for my wheelbarrow to go up the 2 steps in my yard. Assembles easily and works well.
SC
Reviewed in the United States on March 27, 2024
I needed something to make ramps to put my lawn tractor in a shed. The ramps had to be 8 feet long to get an angle that worked so I do use a couple of 4x4's under the ramps for extra support. These have worked great for me.
h20_d_it
Reviewed in the United States on February 24, 2024
The item arrived quickly and was a solid built. Very happy with the quality. Easy to install on 2x6 wood ramps for my trailer. Would highly reccomend this
Mattew M Peacock
Reviewed in the United States on November 29, 2024
As advertised.
Mike Goodwin
Reviewed in the United States on April 7, 2024
I used these ramp plates with 2x10 treated wood. They worked great. If needed I would buy again.
Rick G
Reviewed in Canada on February 8, 2023
Angles worked great for ramp. Hardware fit without any issues.
Drifter
Reviewed in Canada on July 29, 2021
A lot shorter where they sit on the trailer than my others that got stolen. But, there are steel not aluminum as advertised so that was a plus
Deer Hunter
Reviewed in the United States on June 18, 2021
If it had non-skid coating on the underside so that you wouldn't have to drill holes in the tailgate in order to keep it from sliding I'd give it 5 stars. To get my generator out of the back of my truck I had to stand on the ramps to keep them from moving while getting the generator onto the ramps. It was a little sketchy. It would also be nice to know exactly what size drill bits to use. I ended up using a vice grip to hold the head of the lag bolt because the bit I used was a tad too large. The brackets worked well with 8' boards. I plan to put a non-skid coating on them though so they won't slide off the tailgate as well as putting a non-skid coating on the top side of the ramp.
Family fun time
Reviewed in Canada on December 12, 2020
When Looking for Ramp Kit I looked at so many options but in the end I chose this one on price.Responding / agreeing with some other reviewsYes it is made in China and distributed by Hampton out of California.It is rated for 700LBS / 317 KG as long as you respect the specs.It does not have treads on it like some pictures, but honestly this does not make a difference if your entire plank is also smooth.I have added a picture from the box, which would have been helpful for me before buying.I needed a ramp for a 3 foot rise and I used a 10" x 12' treated wood. It worked perfect for my needs. My items are around 400Lbs and I did not use any vertical supports however in the picture I attached it warns that additional support maybe need if the rise is over 2 feet. From my experience the plank did sag in the middle so if I used the ramps for anything heavier I would personally put a vertical support under the plank. I am sure we would have this problem regardless the bracket we would purchase.I would do not hesitate to buy this ramp Kit again.
Customer
Reviewed in Canada on November 9, 2020
Seem good quality
Ram Sandhu
Reviewed in Canada on October 21, 2020
Does what is says it will do.🦾
Mark
Reviewed in the United States on July 13, 2019
I recently got a small riding mower, that I wanted to store in my shed. However the shed sits about 10" off the ground. I was not thrilled with the idea of spending $125+ for some of the narrow metal ramps out there. These are a great solution, that results in having very sturdy ramps, that are plenty wide, and at a great price.I paired these with 2x12x4ft boards I found in the culled lumber pile (huge discount versus buying full lumber boards), at the "orange and white" big box hardware store (Actually one board was a few inches longer than 4 feet, so I cut it to match the other board). Now I have a very sturdy ramps, which are much wider than the metal options, and my total cost is about $25.Please note, the description says these are aluminum, but they are actually steel. So they are bit heavier than some other options out there. However, my boards are 2x12x4ft, and they are easy to put in and place and pick up after use, so the added weight shouldn't be a problem. Because they are steel, I expect they're probably much stronger than the more expensive aluminum options.I paired these with 2x12 boards, rather than 2x6, 2x8, or 2x10, to make it much easier to line up the mower, and not have to worry about slipping off a narrower ramp. I'm very pleased with these brackets, and my new ramps.
Recommended Products
