Your cart is empty.
Your cart is empty.Claus P.
Reviewed in the United States on August 9, 2024
These Led's fitted straight out of the box unlike the bigger ones that I got from a different supplier that needed some cutting. For the Montero owners a little tip. I coloured the centre diff lock and the 4 low leds with a orange marker otherwise because the leds are brighter these two positions are white instead of the original orange. As long as one remembers that Leds are polarity sensitive and if one doesn't seem to be working just to turn that one 180 degree around. All my Leds worked 100%. Good replacement idea
Finn
Reviewed in the United States on July 4, 2024
I purchased these to replace the burned out incandescent bulbs in a 2003 Honda Pilot HVAC controls, the base requires a little clamping down with small needle nose pliers on the wire contacts in order to be able 'lock' them into place using a very small flat blade screwdriver to go a 1/4 turn. Also, you will need to know which end is the + so that you can orient them correctly otherwise you will have to put them in 180 degrees. I have a bench top power supply so I could test them out and know their orientation before installing. Once you understand that, then you can continue to install them into the sockets. They definitely emit enough brightness and hopefully these will outlast the OEM bulbs they replaced.
Alisa
Reviewed in the United States on November 19, 2024
Thank you, everything fits the Lexus GX 470. Corresponds to the description.
R. Nguyen
Reviewed in the United States on February 28, 2022
These fit in my Honda Accord 1998 for the lights highlighting the gear shifts on the console. They are bright to see in daytime and great deal for 10 so I can replace others if the burn out. Hopefully, they will last long đ
Spoot
Reviewed in the United States on May 17, 2021
I bought 2 packs of these to convert all of the burnt out dash lights in my Honda Ridgeline.It is a bit tedious and you have to spin them if you put them in with the wrong polarity (no way to know).They light up nicely and almost look stock.Of the first 10, 2 didn't work at all....that's why I order 2 sets. And I have spares.
Valerie Grapentine
Reviewed in the United States on January 1, 2021
I tested all 10 and they all lit up. Difficult to install in my Mazda heated seat switch because of the poor quality plastic base. The flat slot to turn them and lock in is shallow and soft, so the plastic slot strips out before the bulb pops onto the locking lugs. Maybe the locking lugs are not formed well too? I was able to get them to lock in by putting snap ring pliers in two holes in the base and turning. So they work, just a PIA. What do you expect for under 70 cents each? Haven't used them yet so no long term review. 4 stars because of the cheap price.
Jami
Reviewed in the United States on January 11, 2020
These are garbage. The LEDs are bright if you can get them to fit. There is no real slot on these to fit a screwdriver into. The plastic is so soft itâs almost impossible to get them to hold even if you do manage to twist them in.I had 8 bulbs to replace and after buying a 10 pack, I managed to get TWO bulbs replaced. The base plastic is just too soft and cheaply made.I have to buy something better & pull these out.
Aastha Jindal
Reviewed in the United States on August 23, 2018
The plastic is too soft and thus you cannot easily turn the bulb to fit into the socket, without mutilating the shape of the plastic. But the brightness of these LEDs is good.
Recommended Products
