About Waterproof Sealant for Cracks & Leaks

Xmntdo Waterproof Coating is an invisible clear penetrating water repellent. Applicable to anti-leakage of ceramic and concrete material for roof, exterior wall, window sill, toilet and kitchen.

It is water-based formulated that is non-yellowing to not be affected by weathering, dirt, freezing temperatures, UV light, and wind-driven rain, among many other elements.

It dries down to a clear, invisible finish that does not change the surface texture or color appearance. Provides long-lasting and durable water-repellent protection.

Clear Sealant Waterproof is ideal for use on uncoated/unpainted, vertical/horizontal, interior/exterior surfaces such as: concrete, brick, pavers, wood, porous natural and artificial stone, masonry, unglazed/unpainted porous tile, and color integrated or unpainted stucco.

Excellent Flexibility - Resists Cracking

Clear Waterproof Seal Glue outdoor waterproof for use in sunny, dry weather at 10˚C/50˚F or higher. Invisible waterproof sealant is applied over a width of greater than 30cm at the correct point.

Waterproof Insulating Sealant forms a continuous waterproofing barrier with exceptional adhesion and reduces crack transmission for all surfaces.

Ready To Use With No Need For Premixing - Easy To Apply

Transparent Waterproof Coating Agent Can Be Applied By Brush, Roller, Pouring.

Usable Area: 2-3 even coats per 1kg (35oz) of invisible waterproof glue, cross apply, 24 hours between coats, for a long-lasting waterproof sealing effect. Covering approximately 14 square feet, 1.3 square meters.

Liquid Waterproofing Coating Widely Applications

Flat roofs, sloped roofs, roofs, exterior wall cracks, foundations, sheds, basements, shower, kitchen, sink, metal, wood, concrete, gutters, skylights, chimneys, PVC pipe joints, windows, RV's, DIY projects, exterior plumbing, sealing plumbing leaks, walls, corners, toilet leaks, substrate seams, pools, bathtubs, gardens, pipes, bathrooms, window sills, brick walls, metal, ceramics, ponds

For Optimal Bonding We Highly Recommend Preparing The Surface As Mentioned Below For Remarkable Results

Application Tips & Tricks

1. Apply to a clean, dry surface that is free of silicone, loose paint, rust, oil, grease dust, coal tar, or anything that would hinder adhesive.

2. Apply the next coat when dry to touch with nothing wet underneath and is uniform. Apply each coat in an alternate direction to the last coat to ensure even coverage.

3. Allow 24-72 hours dry, curing depends on temperature, humidity, and airflow. Under the environmental conditions of low temperature or higher humidity, the curing time will increase. Avoid hot, direct and strong sunlight, or rainy, humid weather. When applying, try to ensure that the weather before and after use is clear and the operating environment is relatively dry.

4. It is necessary to find the correct leakage points and recommended that the width of the application is greater than 30cm, to ensure that the waterproofing effect is achieved after the application of the waterproofing adhesive.

5. Suggested temperature for use: above 10 ℃ / 50 ℉ (including overnight temperatures).

6. Please wear gloves and protective clothing before construction, prevent the waterproofing agent from staining clothes and other furniure items, diffcult to clean.