Shopping Cart

Your cart is empty.

Your cart is empty.

InSinkErator RSB-00 Removable Sound Baffle

Free shipping on orders over $29.99

$8.10

$ 3 .99 $3.99

In Stock

1.Color:Iron


  • Easily removed for cleaning


Product Description

The Power Cord Kit is easy to install and includes a three-foot UL Listed cord, strain relief clamp, wire connectors and installation instructions. Once installed, disposer plugs directly into a standard wall outlet. This genuine InSinkErator product meets Underwriter Laboratories SPT-3 category for insulation thickness and moisture resistance.

From the Manufacturer

InSinkErator offers an entire range of accessories. They're made to the highest standards. And they are made to fit. So you know they'll work properly and install easily.


ck
Reviewed in the United States on September 27, 2024
This was an easy sound baffle to install and it’s a simple design so it is very easy to clean.
Customer
Reviewed in the United States on July 28, 2024
Was happy to remove the original baffle and replace with this one. It is so much easier to feed food waste into the disposal now and getting rid of the version that gathered debris underneath, creating rotting smell that had to be cleaned frequently. The disposal noise sound change was not significant.
Twister2769
Reviewed in the United States on December 5, 2024
I was so fed up with the baffle that came with our InSinkErator that I had to search for something better. The current baffle had such horrible drainage the sink would fill up with water instead of draining! This baffle looked like it would drain water extremely well and had high reviews, so I bought it. It is so inexpensive I thought it was just going to be a wasted purchase, but I literally JUST received it on my porch and swapped out the baffles. I turned on the water full force and it 100% drained!!! No water back up in the slightest! I am amazing at this baffle and don't understand why InSinkErator doesn't provide THIS one when buying their garbage disposals! It's fantastic!! One drawback is it is not as soundproof as the one that came with the garbage disposal, but to have such fantastic drainage of water, it is worth it!
plumolive
Reviewed in the United States on October 16, 2024
Finding it impossible till now to find or even verify the size needed for a replacement I was pretty stoked that this one popped in slick and tight as you like. Even Moen doesn't give accurate info on the size you need to replace the.protective flap. As I JUST installed it I can't vouch for anything other than fit but knowing this is the right size should help anyone else with the Moen EXL100C who's tired of dodging flying garbage!
Zvi J Doron
Reviewed in the United States on February 17, 2023
After finding all the "easy" ways that one can replace the splash guard / sound baffle on my 20-year old 777ss-1 Insinkerator, using stools, piles of books, shims etc., it occurred to me that there had to be a simpler solution. Well, this thing IS that simpler solution. By far the most difficult part was getting the new splash guard out of its original packing, and that took a pair of scissors and no more than thirty seconds or so. Once it was out I put it in the sink. It fits perfectly, easy to push into place yet tight enough that it is firmly there. Some, but not that much, noise reduction, but my purpose was to avoid splash-back and that works perfectly. Question to Insinkerator: Why not have this kind of splash guard from the beginning, and make life easier for your customers?
Carlos M.
Reviewed in Mexico on December 31, 2023
Llego rápido y como se describe
John
Reviewed in the United States on May 30, 2020
The sound baffles on both of our Insinkerator disposals were shot so I was looking for replacements. I found several different possible baffles - there's this one that was claimed to fit everything *except* the Evolution models, the "one piece" gasket version for the "badger" series (this is what our ProSS came with), and the new "anti-microbial super secret special expensive baffle" that "only fit the Evolution series".There were a ton of reviews, all providing conflicting (mis)information. It was extremely difficult to figure out what was right.This baffle, the RSB-00, was labeled on the package as working with a wide range of disposals, including our ProSS. The Evolution was *not* listed on the package, even though our Evolution disposal originally came with this baffle!When we installed it we replaced the original baffle with the anti-microbial one to match the one our older ProSS used, and put the original RSB-00 in a drawer. I compared that baffle with this new RSB-00 and it is identical.Both the Evolution Essential and ProSS have the same size disposal neck. The RSB-00 installed easily into the Evolution, fitting perfectly over the steel retaining ring. Our ProSS has one of the one-piece baffles installed so I used a matte knife to cut the original baffle out. Once the original baffle was removed the RSB-00 installed easily over the steel retaining ring and fits like a glove.I really like the look of the RSB-00 versus the "upgraded" anti-microbial model. It works better, drains faster, and as near as I can tell the disposals aren't any louder than with the "upgraded" heavier model. The ProSS has always been loud (definitely louder than the Evolution) and with the old degraded baffle it was even louder than normal.With this new baffle it's nearly as quiet as the Evolution, and doesn't splash water out of the disposal anymore. That's a huge upgrade in my opinion!I'm really happy with this purchase. I bought two because I didn't remember we had one already - that just means we have a spare on-hand for when these need replacement.
Sugar Plum
Reviewed in the United Kingdom on July 25, 2019
Took it out of the package popped it into the sink hole, and its working great.
Jesus Barrera
Reviewed in Mexico on December 24, 2018
Remplazo
Joanne
Reviewed in Canada on December 1, 2017
My original insinkerator one that came with the garburator was annoying... didn't let much through, not even water. This one fits perfectly and I am finally able to use the garburator as intended!
ST
Reviewed in the United States on August 11, 2015
Okay, first of all, I used to sell GD's and I didn't even realize that some of them had baffles that couldn't be removed. So, of course, I got one. Before I say anything else, I'm going to tell everyone who, like me, needs someone to draw them a picture, how to remove the old one.I can't believe people actually put a new one over the foul-smelling, moldy, old one but here's how you get rid of it. First, I cut off as much as I could with scissors, then I used a plastic utility knife that lets you let out about an inch of blade, and held it flush against the side of the opening and shaved off the leftover edge, all the way around. Then I scrubbed every bit that I could possibly reach, while the hole was open. Then I put GD cleaner in it overnight and supposedly cleaned it. As described, the baffle fits perfectly. However, this GD has always smelled bad and I have never had one before where nothing works to get rid of it. Of course, it's better now and I can clean the baffle but I thought the problem would be solved. One more random comment; I noticed a lot of people bragging about grinding up bones and corn cobs, etc. Very bad move and not what GD's are meant for--even though the mfr.'s use it as a selling point so you'll spend more money.It's bad for the plumbing, the environment and an all-around bad idea. GD is for the residue left after you scrape your plates and pans in the garbage pail. Just putting that out there for people who want to be responsible users.
nervy
Reviewed in the United Kingdom on October 29, 2013
The previous stopper was 30 years old and rather worn so we did not notice that the macerator had become noisy. The replacement has made an amazing difference considering it is just a moulded piece of rubber. It also fits snugly so no more food clogged in the rubber
Recommended Products