Your cart is empty.
Your cart is empty.Product Description
BassMan854
Reviewed in the United States on February 7, 2025
I've been interested in getting a reasonably priced hand-held thermal scanner for use around the home. I searched Amazon and found the Innova 3360 Thermal Camera. It appeared to have the features I wanted, so I ordered it.The item arrived quickly. It was well packaged in an Amazon shipping box, and it arrived without any damage. Inside that box, the item was factory-packed in its own multi-color, branded box that is suitable for gift-giving. The contents include the full-color thermal scanner, wrist strap, USB cable, and nylon carrying case that can be worn on a belt or carried using the included shoulder strap.I was eager to try it. So, I grabbed the Quick-Start Guide from the box and scanned through it. Note that you must insert 3 AAA batteries, which are not supplied. Once the batteries are installed, you simply press the red button on the panel to activate the unit. The screen goes through a quick initialization, and then the device is ready to use.After powering up the device, I went through the house and scanned the windows and doors. Most were good, but I found a few that had a spot or two where a small amount of cold air was getting past. I will have to look closely at those and tune up the seals as needed. That said, this is exactly why I wanted the scanner, and I'm happy to be able to do this on my own instead of hiring someone to do it.The device has many other features -- too many to go into in this review -- so be sure to read the Owner's Manual, which fully details all of them.
Carlos Ocampo
Reviewed in the United States on February 21, 2025
I was excited to get my hands on the Innova 3360 Thermal Camera, hoping to finally find those pesky thermal leaks in my home and save some money on my energy bills. Unfortunately, my excitement quickly turned to frustration.Right out of the box, the camera powered on, but then it got stuck on the boot screen. I tried everything - restarting it, updating the firmware, even contacting customer support - but nothing worked. It's completely unusable.The camera's description promised high-quality thermal imaging and user-friendly features, but I experienced neither. It's incredibly disappointing to invest in a product that doesn't live up to its claims.I would strongly advise against purchasing this camera. Save your money and look for a more reliable and functional option. This one is a complete waste of time and money
Customer
Reviewed in the United States on February 17, 2025
So far it’s working OK
Sergiu Partenie
Reviewed in the United States on February 15, 2025
From the manual:- 32x32 Pixel infrared sensor- Visible camera: 307200 pixelThe image is VERY low resolution, tried differed lighting in the room, changed color modes and fusion distance.Turns out that it's not using that visible camera at all, but only the 32x32 pixel sensor.See the photos: That red thing is supposed to be the laptop (fusion is set to 0.5m, camera is at 0.5m from laptop)First photo is supposed to be the "fusion" one with both cameras, in 2nd photo I had the visible camera covered - exactly the same result.If the visible camera were defective, it should have displayed an error. I'm fairly sure that visible camera is not even connected to anything inside.And at 75% of the price of other higher-resolution imaging devices ...This is NOT a sponsored review.
Thomas
Reviewed in the United States on February 14, 2025
Pros:- If the picture is distorted, adjust the up/down button and you will get a "good" picture- Long press the Back button to power on/off the device- Press the trigger to take a picture and then Ok button to save an image- Display shows: - E (emissivity) number that is a measure of how well a surface emits infared energy, surfaces with a high emissivity are easier to measure. - Target, Minimum, and Maximum Temperature- Ability to save the images on the device - unfortunately, the images can not be viewed from the device. However, there is a micro-USB port and included cable that can be used to connect to a computer. The device shows up as a USB drive. Each saved image is 140 kb and is stored as a BMP file that is 240 x 294.- Good build quality, feels like a commercial product- Comes with canvas bag with shoulder strap and 2 compartments- IP 54 ratingCons:- Requires 3 AA batteries (not included). I have so many devices where I leave the battery in and then it corrodes and damages the device, I really wish this device was rechargeable.- Takes about 11 seconds to save an image - so slow!- You can NOT view the image FROM the device itselfProduct InfoTEMPERATURETemperature Range -20 to 600°C (-4 to 1112°F)Temperature Measurement Accuracy. 12% 12°C (#3,6°F) as tested at 25°C (77°F)Screen Shot Rate Correction - YesIMAGE PERFORMANCEImage Capture Frequency 7HzSensor Type - Non-refrigerating heat release pointThermal Sensitive(netd) 254mkInfrared Band 8 to 14pmVisible Camera 307200 PixelField of View 33° x 33°Focal Length - Fixed focal lengthIMAGE DISPLAY MODEColor Table - Iron Red, Color Red, Grayscale (White Heat), Grayscale (Black Heat)Level and Span AutomaticFUSION INFORMATIONVisible and Infrared Fusion Distance. 0.5m, 1.0m, 2.0mView Options 50% StepHot Spot and Cold Spot Tracking YesIMAGE CAPTURE AND STORAGETacking Pictures YesStorage Medium - Internal flash storage can store over 100 piecesDocument Format - BMPMemory Viewing - View or delete stored photos from the menuOperating Temperature 0 to 50° C (32 to 122° F)Storage Temperature -20 to 60° C (-4 to 140° F)Relative Humidity 10% to 90% non-dewfallDisplay Screen 2.0 inch, 240 x 320 TFT LCDWaterproofing Grade IP54
Recommended Products