Your cart is empty.
Your cart is empty.3.9 out of 5 stars
Product Description
MINI MAGNET POWER HEAD WITH CONTROLLER
A smart wavemaker, build in LED display controller that enables to mimic ocean waves by setting various flow modes, power and frequency according to sunrise and sunset, day and night. 12V DC powered controllable wave maker, is energy efficient and safe to use. Create a ideal ocean-like environment for your saltwater aquariums.
- Simulates ocean reef currents by continuously circulating water
- Easy to install and detach magnet mounted
- 360 degree circulating water to whole tank back and forth
- Smart controller to create customized current
- Compact size, easy to hide
- 1600 gph powerhead for 3-25 gallon freshwater and saltwater aquariums
- 2600 gph powerhead for 26-55 gallon freshwater and saltwater aquariums
Notice: something need to know when setting the wave maker:
- When adjust wave mode into 4 ( random mode), power and frequency can’t be adjust. Such as 1040,2040, 3040,4040, 5040.
- If you set wave mode into 3 (constant stream), frequency can’t be adjust. Such as 5138, 5238, 5338, 5438.
- When powerhead runs reversely, it means something twist around inside you need to take it out and clean impeller
- Error code 7 means something stuck the impeller. You need to unplug it and take it apart to prod the motor fan in few circles, then restarts. Also. remember to place the pump 6 inches below water surface. Too shallow water could also cause error 7.
Programmable Power Flow Mode Frequency
5 PERIOD OF TIME
The default time can not be set. You can set each time with specific power, flow mode and frequency. Default setting see above image.
4 LEVELS OF POWERS
There are 4 levels of power to be set, from low to high: you can set from 40%, 60%, 80% and 100%.
4 FLOW MODES
The third digital number indicates wave mode: 1. Classic Wave 2. Nutrition Transmission Wave 3. Constant Stream 4. Random Wave.
8 LEVELS OF FREQUENCY
The frequency is programmable, set from fast to slow, 1-8. 1 is the fastest and 8 is the slowest.
TROUBLESHOOTING
- Err7 code or stopped working
Reason: out of water protection/debris clog up
Solution: please take the impeller out, pry off the fan with a screwdriver and pull out the post with plier, prod around the impeller fan few circles, wash clean and then restart. Please place it underwater at least 20 cm deep.
- Err6 code
Reason: Loose connection or damage electric wire
Solution: Please check the wire connection or Replace part of the pump
John Greaves
Reviewed in the United States on January 31, 2025
Couldn’t be happier, it works amazingly in my Fluval Evo, people complain about setting up, Read the instructions it’s very easy. Great product. Flow is great so far no problems I like the Durability.
Karen N
Reviewed in the United States on March 5, 2024
I cant understand for the life of me how this has good reviews! Its sucks! I have attempted several time to program and just gave up! Its on default mode and judging by the diagram listed on here its not working right. Its 12:47pm and the first number says 0! I dont see how that can be. That number is not listed as an option. It must be malfunctioning! Its now reading 0801and its barely doing anything. I shuts on and off putting out very short little bursts! I wish I would have returned it a long time ago! I will stick with Jebao from here on out! Supposedly its on default so the numbers and flow should change throughout the day. The numbers change but flow dosnt! It just does the same thing all day short tiny bursts! ! Beside that It has these 4 rubber prongs that attach it to the magnet and one of the rubber prongs broke right away so I only have 3 and its constantly needing to be put back in the holes! I hate this wavemaker! The worst I have ever bought and it isnt cheap! I am about ready to trash it and buy a jebao! Then use this for down bottom and add a tiny bit of flow because thats all I can get from it!
yafar perez
Reviewed in Mexico on November 12, 2024
buena calidad del producto y tiene programa automatico mis peces estan mejor desde que onstale esta bomba
robert whitcombe
Reviewed in the United Kingdom on October 23, 2024
Product doesn't seem to want to work
Jason
Reviewed in the United States on April 30, 2024
The media could not be loaded.
Nayna
Reviewed in Australia on April 29, 2024
This is a great powerful little wave maker for my 150l tank. It does what it says and can be adjusted to yr settings.
Khalifa
Reviewed in the United Arab Emirates on May 4, 2023
This thing is Fantastic, straight out of the box and into the tank, Do not change the setting or anything and just clean once a week. Would buy again
ajitesh b.
Reviewed in India on May 7, 2022
Love this micro beast. You can set your preferred flow during different times of the day. And it generates strong flow.
citan-uzuki
Reviewed in the United States on October 21, 2020
This little Hygger wave pump is a very good value. Don't let anybody tell you that it takes $300 to build a good wave pump.The Hygger pump is low on features. As you would expect at this price. But a wave pump is a wave pump. They are propellers used to move the water inside a fish tank. The level of quality and features differ greatly among the price points. But they all function the same way. This Hygger device will move water as well as any pump of the same size. What you get in the more expensive device is a better build quality and more features. This one does not have WiFi. It has no App control. All of the control are on the included console.I use this pump to add movement to a 20-gallon long. I have it on the lowest setting. This tank has three filter-feeding shrimp. They grab moving particles from the water and eat it. The particles have to be tiny. Flakes and crushed flakes are too big. I needed enough water movement to keep the food powder in circulation. This Hygger pump does just that at its lowest setting. Too bad Hygger does not make a smaller pump.Setting the power levels, wave modes, and frequencies will take a little getting used to. There are four digits on the display panel. The first digit is the code for the time of day. A day is broken into intervals. You cannot change the intervals. You can program the power level for each time interval. Level 1 has a maximum power output of 40%. In my opinion, it should be 20% to accommodate smaller tanks. It goes up to 100% as you increase the number. The third is the wave mode. The last digit is the frequency of the waves. The lower that number, the more quicker the wave pulses. A higher number will give a gentler water movement.You may need some kind of a screen if you have smaller fish in the tank. The pump is powerful and could draw in small fish. The easiest way is to use those garlic nets. Go to the produce section of your grocery store and look for the garlic. They come in a sock-like net tubing. Wash the tubing and soak it in water. You want to remove any traces of garlic. Then cut a 2" piece and slip it over the pump head. And there you have an excellent net to prevent smaller fish from getting drawn into the pump.This is an excellent wave pump. It is nowhere near the quality, power, and features as a Vortech MP10, but then again, it's not $300. Save the Vortechs and the Maxspect Gyres for your reef tank. Those high dollar pumps are not needed in a freshwater tank.Highly recommended for the smaller fish-only tank or invertebrate tank. Spend more money for reef tank use.
Recommended Products
$179.99
$ 85 .99 $85.99