Your cart is empty.
Your cart is empty.Product Description
10 Pack Straight Bits
1/8" Shank 2-Flute
This set of HQMaster tungsten steel milling cutter is perfect replacements for your CNC machinery, making you enjoy a precise and easy cutting experience.
Sharp edge design is able for fast engraving and makes high efficiency.
Fits for woodworking engraving machine, advertising CNC router machine. Work perfect on milling or cutting machines.
10 Pack Double Edged Straight Bits
Safety Instructions
● Stop immediately in the processing of anomalies when using the CNC Router Bit and find out the reason before reprocessing.
● Pay attention to the condition of wear and tear of the cutting edge and timely check the CNC Router Bit.
● The bladed product is not for people under 18 years.
● The item is only used for industrial cutting not hazardous article.
- Number of flutes: 2
- Material: tungsten steel
- Package contents: 10pcs straight bits
Wide Application
Ideal for cutting/engraving/carving/grooving/slotting/drilling/hollowing/positioning/roughing /milling in materials like MDF, PVC, Acrylic, wood, solid wood, chipboard, composite board, organic board, core board, density board etc.
Wonderful Performance
Use of tungsten steel material with good milling, cutting performance, ensure high work efficiency The design of 2 flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal. Durable, high precision and not easy to break; it is smokeless and burr-free while processing.
Considerate Package
Bits are well assorted in a portable plastic case for easy storage, each contained in a individual section, with a foam inserted keeping the bits from beating each other up.
Storage case size: 55*51*9mm
Kate S
Reviewed in the United States on July 2, 2023
The media could not be loaded.
Russell
Reviewed in the United States on November 24, 2023
For the price these bits work great used them already. They do a great job I would recommend them.
Sasquashington
Reviewed in the United States on April 29, 2023
Thought I would need all of these to route a 1/8" screen spline 1/4" deep in the oak door I built. Only did passes of 1/8 inch and went slow. Had my colt router on half speed too. Started slowing down towards the end but I was stubborn and wanted to see if I could make the bit last the whole job, IT DID. It was a little heat discolored at the end so threw it out. Still got 9 more!!Prob 16 feet of routing done with one bit. VERY GOOD!
John Joseph
Reviewed in the United States on December 22, 2022
I purchased these because I had just purchased a dove tail jig from a high end woodworking retailer. The bit that came with it broke on first use. A replacement bit was $32. I just received these and finished my project. These worked perfectly and you just can't beat the price.
Vidal garza
Reviewed in Mexico on December 23, 2020
Buena calidad
Brad Goodall
Reviewed in the United States on October 13, 2020
This is a good bit with some specializations. Run this on a Shapeoko with a Bosch 1617. Feeds at 100IPM with a 3/8" DOC at full RPM. Works extremely well on thin plywood (1/4") as you do not need tape to hold the board down, since the cutter will not pull up like it will with spiral flutes. On thicker materials, such as 3/4" ply, you will wind up with a layer of compressed sawdust holding the part in place, which makes cleanup a touch more difficult, as in some instances a screwdriver is required to separate the dust from the cut, but the edge quality is extremely good. Longevity is a tad short, like most of the HQMaster bits, sometimes the bit will go 10hrs or so of straight cutting before you notice signs of dulling (rougher edges, more RPM loss when cutting, etc) and sometimes they will shatter.
Adam Lesser
Reviewed in the United States on July 18, 2019
It was pretty hard to see that this would not be a general purpose bit from the seller’s pictures , but on examination ( see the picture I included ), it’s clear that these bits arnt center cutting !That makes them much less useful for hobby or professional CNC users unless you are very careful to reduce your plunge rate, since these will have a hard time going straight down (vs side to side ). This is a bit of a critical flaw in these bits that makes them unsuitable for general purpose use sadly.
John A.
Reviewed in the United States on July 11, 2019
These are the only bits that i use.They last very well out of the bits that I have bought I have only broken one.I mainly use them on soft pine but have used them on Oak and other hardwood but I drive them extremely hard 100 ins per minute 30in/min down and .0032 each pass.They maintain their sharpness very well and I will get a production run of about 30 units per cutter. When I notice that the cut edge is becoming a little fuzzy I will change it out.As for the individual that complained that they were not 1/8 all the way down you have to have clearance down the sides of the cutter.It is not a fault of the cutter or the manufacturer it is by design.
hogryder
Reviewed in the United States on May 16, 2019
Seems to be well made blades. Due to the small size this type is difficult to sharpen correctly so I bout the ten pack so I'd always have sharp bits. I briefly used one of these and was happy with its ability to cut properly.
Nevets armstrong
Reviewed in Australia on October 23, 2019
All good :)
Recommended Products
$29.99
$ 12 .99 $12.99