Your cart is empty.
Your cart is empty.Scaffoldings, these days—you know how fickle them can be. One minute you’re rolling them down the floor of your basement or garage and the next minute, the wheels come off. That’s when this set of four 4” Caster Roller Wheels pull up to get your gear back in gear. Sure, they can screw right into any Honey Can Do shelving unit—but their universal design makes them ideal industrial wheels for furniture around your house or other rebellious scaffoldings. And because you like to be thorough, make sure to check the diameter of those holes prior to purchasing. Features-Brakes,Heavy Duty.
DDL
Reviewed in the United States on March 3, 2025
Bought quite a few sets, pretty much every shelf I have has these, work great, extra height is nice, and they hold up well.
P
Reviewed in the United States on January 4, 2025
Nice wheels and fit well. You can screw them in all the way or leave it a little out to even out the shel if need be. Easy to install, seems pretty heavy duty for most household needs.
MS Kookie
Reviewed in the United States on January 19, 2025
4” wheels were perfect for HDX shelve from Home Depot. They fit right in the slot. And roll and lock very well, worth the money.
ian
Reviewed in Mexico on September 26, 2024
Los use con estantes de Home Depot y quedaron perfectos
sheilab
Reviewed in the United States on August 3, 2024
Perfect wheels for our 5-tier cellar shelving. Easy to install, comes with wrench and well packed. Good rubber wheels vs the plastic ones you see - makes it easy to move shelving around as needed without worry of toppling
Customer
Reviewed in the United States on December 28, 2024
Must purchase for your shelf. Good quality perfect with Honey can Do products. Best brand ever!
Zero Signal
Reviewed in the United States on November 26, 2024
I bought the typical wire steel shelves for my garage when one of the big stores had them on sale. I got a couple of different ones and they were great for organizing car parts, bins of screws, etc., but once they were loaded down there was no moving them around.We use similar shelves at work and I noticed that they were on casters. I found these and ordered a pair to try.These screw right into the bottom legs of my shelves, though I recommend you check yours before ordering as some may not be threaded for casters. I put a drop of oil in the swivel bearing at the top of each caster and another on each axle before installing. They swivel and roll very smoothly, even with a couple of hundred pounds of stuff on the shelves.A word of caution: The shelves can tip over easily if the wheel hits debris (a rock or screw, etc.) while rolling. I haven't had this happen but I'm very careful about it, even going so far as to sweep the floor before I roll them around. When I'm done, the brake goes on so the shelves don't go exploring.If you're like me and are constantly rearranging things to make room, these are a great value.
flacracker
Reviewed in the United States on April 24, 2024
These are great wheels. They work perfect on those black wire racks. My only complaint is, I got 1 set 4 inches and my other set appears to be more like 3 inches. But I use them anyway. They roll great and supper easy to install. The little flat wrench they came with was very helpful.
Robert Miller
Reviewed in Canada on July 8, 2022
I needed to replace one wheel on a 48” wide by 18” deep heavy duty wire rack shelf unit. The original wheels are nearly solid plastic. These are the same width where the wheel touches the floor, but thinner in the middle. These wheels are about 1/8” shorter than the originals. I considered adding a couple of washers to add a bit of height, but decided it was easier to just change all four wheels. May not be able to handle as much weight as the original wheels, but in this case they seemed strong enough for what I am placing on the shelves.
Mamá amazing
Reviewed in Mexico on September 20, 2021
Muy resistentes y facil de instalar, me encantaron !!!
Chuck Mitchell.jr
Reviewed in Mexico on August 17, 2017
Tengo una amplia experiencia en la eleccion de productos y provedores de calidad y servicio, lo que me hace un comprador exigente, experimentado y que busca siempre la mejor opcion costo-beneficio.Asi, es como doy base a mis valoraciones, para apoyar la retro-alimentacion entre clientes, futures clientes y vendedores. Comencemos:Satisfecho, con el producto, calidad optima, agradable a la vista.Funcional, cumple su proposito, descripción precisa, sencillo y fácil de instalar, recomiendo revisar el modelo de tu armario antes para que no te equivoques, sin problema alguno.Envío optimo, pedido sin contratiempos.Costo - Beneficio, Excelente.Recomiendo ampliamente el producto.=) excelente compra, buen servicio, gracias.
honestjoe
Reviewed in the United States on August 8, 2015
I ordered these somewhat less sturdy casters as compared to the original casters from Seville Classics, the manufacturer of my original rack system, to provide some mobility for the second half of my full height rack when I decided to split it in two to get 2 (two) approximately 40" high racks. The original casters made by Seville are rated at a total support weight of 500 lbs. for the full system, so they are plenty strong for half of a rack. When I saw these Honey-Can-Do casters that are rated at a total supporting weight of 350 lbs. I was not concerned with their limited strength since they would only be carrying half of the loads of my original rack ! Honey-Can -Do rack systems might be less heavy duty than Seville's but in this case they'll do just fine, especially considering the price and the easier availability than the originals ! The 3/8" x 16 SAE threads of the studs are a perfect match.So anybody considering doing the same as I did, making two lower racks out of one tall one, you can not go wrong with these. They are plenty strong for a 40" rack system as long as you keep in mind the weight limits of the systems.
Peg
Reviewed in Canada on May 28, 2014
I bought these some time ago to use on a 4-shelf chrome rack from the tire store but never got around to unloading the rack to install them. This past week I bought some Trinity Bronze 4-shelf racks from the big box membership store, deciding to turn two racks into three racks using the inner rods to support the middle 'rack'. So instead of 3 separate racks using 12 uprights, I have one long joined rack using 8 uprights. That left me with f4 unused uprights and 2 shelves leftover. I decided to do a half height rack, and discovered these wheels fit the uprights. While installing the wheels, whilst taking it easy on my recliner, the entire thing slid back giving me a table . Eureka! Grandpa has a table for his recliner. Slides right under. It's a tad wobbly with the trays both at the 24-28" height but it works great. And far cheaper than anthing I've been seeing.
Recommended Products
