Your cart is empty.
Your cart is empty.Product Description
TEANTECH 3/4" Bore 12T Go Kart Clutch with #35 Chain Centrifugal Clutch and Chain for Go Kart Minibike Honda Kart Engines
- Shaft size: 3/4" Bore 12 Tooth
- Chain Size: #35 Chain
- Tooth Count: 12 Tooth
- Engagement Speed: 2300±300 RPM
- Recommended Engine: 2HP - 6.5HP, 3/4" shaft with flat key
- Fitment:
- Perfect for Go Kart, Mini bike, Fun Kart
- For 2-6.5hp Honda & Honda cloned engines GC160 GC190 GX120 GX140 GX160 GX200
- For 3.5-7hp engines using #35 Chain
- For Briggs & Stratton and 2 - 6.5 HP with 3/4" Shaft
- For Tecumseh Engines 2 - 7 HP with 3/4" Shaft
- For Other engines with 3/4 crank shaft and 3/16" key way
- For Most 5.5 HP clones, 6.5 HP clones and 4-7HP motors
How to Oil the Cluth that make it more long-Lasting?
- Remove the Chain from the Clutch. Please ensure all the right tools in place and also your go-kart is in the position where you can easily access the chain and clutch.
- Remove the Clutch from the Go-Kart. Please check how your clutch is secured. Remove the set screws of the clutch and/or the bolt and washer from the crankshaft.
- Apply Oil around the Bushing Only apply oil to the brass bushing, which is in contact with the clutch drum. You don't need to dismantle the clutch or remove the clutch drum. Don't lubricate the ventilation holes of the clutch.
12T 3/4" Bore Go Kart Clutch with #35 Chain wide applicable for Go Kart, Mini bike, Fun Kart
- For Harbor Freight Greyhound 196cc and Harbor Freight Predator 212cc
- For Briggs & Stratton and 2 - 6.5 HP with 3/4" Shaft
- For 2-6.5hp Honda & Honda cloned engines GC160 GC190 GX120 GX140 GX160 GX200
- For Tecumseh Engines 2 - 7 HP with 3/4" Shaft
- For Other engines with 3/4 crank shaft and 3/16" key way
- For Most 5.5 HP clones, 6.5 HP clones and 4-7HP motors
Customer
Reviewed in the United States on February 7, 2025
Put on a Tecumseh 5hp peg leg cart and it lasted for about 20 minutes then would not sit still at idle. Installed correctly, oiled properly, but didn’t last long. Try another brand than this.
Bill H.
Reviewed in the United States on February 28, 2025
Seems to be of good quality. It’s a bigger beafier chain than my old one. And the clutch seems to be good quality. I guess time will tell
John E.
Reviewed in the United States on February 21, 2025
Great product worked perfectly
Customer
Reviewed in Canada on January 5, 2025
Not the highest quality clutch but better than most. Chain came plenty long, cut it to length. Installed on arctic cat z120 mini sled
Jim c
Reviewed in the United States on January 3, 2025
Engine on conveyor
Len L.
Reviewed in Canada on January 3, 2025
Will work great for my application good value
mike G.
Reviewed in the United States on January 11, 2025
Was easy to install an worked for my application
louisa zeffer
Reviewed in the United States on August 17, 2024
good product
Danyk boisclair
Reviewed in Canada on June 15, 2024
Dont fit my 7/8 shaft cuz im dumb otherwise its good
Charles Pitts
Reviewed in the United States on May 3, 2024
I gave three stars because I don’t know if it was quality, or the terrain we used the go kart on. Predator 212 on a one tire fire kart. We were in a bit of mud in hilly terrain. I imagine on flat ground it would still be working.
Tony
Reviewed in Canada on April 5, 2024
Perfect! Good quality highly recommend!
Customer
Reviewed in Canada on April 14, 2024
Fit perfectly for the kids go kart hours of fun
Morgan
Reviewed in the United States on September 18, 2023
So, I got my hands on this Go Kart Clutch, and let me tell you, it's like strapping a turbo boost to my mini-speed machine. The 3/4" Bore 10T is like the precision engineer's dream – it grips onto the power like a determined superhero clinging to justice. If your go-kart had a personality, it would thank you for this upgrade.Now, let's talk chains – the #40, #41, 420 kind of chains. It's like the Goldilocks of chains – not too big, not too small, just right for unleashing the beast within your go-kart. It's the kind of chain that says, "I'm here for a good time, not a long time," but it's sturdy enough to handle the speed demons and the off-road adventures.Installing this combo on my Yerf-Dog kart was like giving it a shot of adrenaline. The Tecumseh engine roars to life, and suddenly, I'm the Mario Andretti of the neighborhood. It's like upgrading from a tricycle to a rocket ship.The 10T clutch is like the traffic cop of the kart world – it regulates the speed, making sure you zoom when you need to and slow down when the corners get tricky. It's the guardian of your adrenaline, ensuring you have a thrill without the spills.And the best part? The durability! It's like this clutch and chain combo has been training for the karting Olympics. It doesn't give up, no matter how many laps you throw at it. It's like the Rocky Balboa of go-kart components – takes a beating and keeps on speeding.In conclusion, this Go Kart Clutch with the 3/4" Bore 10T and #40 41 420 Chain is the upgrade your go-kart didn't know it needed. It's like giving your mini-speedster a shot of espresso and telling it to hit the track with a vengeance. If you want your kart to go from zero to hero, this combo is the key to unlocking its full potential. Get ready to leave your rivals in the dust!
Recommended Products