Your cart is empty.
Your cart is empty.The Gator Cases GR-STUDIO-8U 8 space studio features 5/8” furniture grade black oak laminate and 3.2mm heavy-duty cold rolled steel rack rails. The GR-STUDIO studio rack case has a rackable depth of 15.5”. The stationary studio rack also features screw covers for the hardware to maintain a professional, low profile appearance.The GR-STUDIO series racks are designed for studio, home studio, office, or venue use and add a professional look to the environment. The black finish is durable and easy to clean. The GR-STUDIO series studio racks are available in 4U, 8U, 12U, and 16U rack sizes. Gator Cases is known for manufacturing innovative products designed to protect! We offer a wide range of available sizes, materials, and protection levels, for all types of instruments and gear including Frameworks stands, Rackworks install racks and accessories, and Protechtor drum cases. It isn’t hard to find a great reason why Gator should be the brand you trust to protect your equipment for life!
Customer
Reviewed in the United States on September 30, 2024
My 3 pieces of gear fit perfect. I only wish it came with screws lol
spawn_mc
Reviewed in the United States on August 8, 2024
No assembly instructions were included. Pressboard was disintegrating around pre drilled holes. Plastic feet fall out of the mounting holes. Unit looks horrible
alfredo
Reviewed in the United States on May 29, 2024
It was super easy to put together. The cabinet is composed of four panels with pre drill holes for the six screws on each side. The rack ears are attached by two screws to each side panel.The final product is ligth, looks good, seems sturdy and fit nicely with my existin rack.Fácil de armar 4 pedazos de madera con orificios listos para los seis tornillos que van instalados en cada lado. Los arneses para el equipo se instalan con dos tornillos cada uno.El producto ya armado se ve bien, es ligero, estable y combina bien con el equipo que ya tengo.
Walt
Reviewed in the United States on March 29, 2024
Pros: Less expensive than fancier options. Reasonably strong.Pro and Con: Fairly heavy.Cons: A few small chips, blemishes, and cosmetic defects here and there. Rack rails are set back too far for my application. (I have a vintage 1960 Crown open reel audio tape machine; the tape reels won't clear the edges of this rack. So I either need to remove the rails, drill new mounting holes, and re-install the rails, or get a different rack.) Shipped broken down as flat boards. Assembly required. No assembly instructions, although it's pretty obvious what you need to do. Material is ⅝ inch coarse particle board with black vinyl veneer. Veneer is a bit loose in some places. Joinery is butt joints with large exposed screws directly into the particle board. This is basically exactly the same construction as inexpensive furniture (e.g. cheap bookcases, desks, etc.) that you must assemble yourself.Bottom line: Good, no-frills option for many situations. But missed the mark for my particular needs.
Len Farmer
Reviewed in the United Kingdom on February 25, 2024
Arrived today, No problem putting it together but however NO SCREWS to install my rack stuff, this is the first time I have bought a 19 inch rack unit and it did not come with the SCREWS to hold in my rack equipment. Have now got to go out and find the right size screws.UPDATEI bought the right size screws for a 19 inch rack unit and guess what they don't fit, why because the holes in are quite a bit smaller, so I HAVE WAISTED MY MONEY ON THE SCREWS. also this is not worth the money £110.
Tom D.
Reviewed in the United States on October 14, 2024
Easy to assemble, well made. Can hold 4U without any issue - you can do any combo up to 4U total. Great for home lab use as well.
Customer
Reviewed in Canada on August 20, 2023
Manque un peux de finition, mais j en avais besoin et il me satisfait.
Frankie Roy
Reviewed in Canada on April 12, 2022
Belle emballage, vaut vraiment la peine lors des spéciaux!!
AMAZADDICT
Reviewed in the United States on March 27, 2020
I was skeptical due to other reviews but I am pleased this worked out for me. It's basic laminated particle board & a good weight without being too heavy or light. Gator packaged this well, making sure all pieces were secure & separated so if yours arrives jacked it's not the manufacturers fault. All the panels were in good shape & all the pieces for assemble were included. There were no instructions but with little thought it was very easy to figure out. It went together very well & it includes screw caps to hide the external screws on the sides of the rack. It came with pre-drilled caster holes (square pattern) on the bottom. The casters I used have a rectangular plate but I was able to use 2 of the pre-drilled holes for each and it was easy to install the others with small self tapping screws that came with the casters I used. It's pretty solid, especially when the gear is racked. With all that, I do feel that the price should be closer to $80 instead of the $150 I paid for the 12U. So far it's been good for my situation & I really like that it's not too bulky.
Awesomeo
Reviewed in Canada on February 22, 2020
I am hesitant to try ordering this product again.First off, the rack came in what I can only call used condition. All the holes appeared worn and heavily chipped away. Dings all over some coloured with what could be black marker possibly and what looks like holes drilled buy a previous user.Then the biggest problem. I could not build the rack because all that was shipped was the wood. No screws to actually put it together with.I get it is a low cost rack, but the expectations are pretty low and straight forward. A simple rack not intended for the road that will be setup and sit in one place holding my gear.Big fail today.
claudemyster
Reviewed in Canada on December 3, 2020
Well made. Easy to put together. Functions as it should. Looks great!
peederj
Reviewed in the United States on October 26, 2019
Sure you could build your own, but I got a nice deal on this scratch & dent from Amazon Warehouse and the scratch was so minor I barely noticed it. Everything is very solid on mine, zero issues. The rack is set in a bit to protect the knobs should the whole thing fall face down. The units mount nearly flush inside, but there is a little left for ventilation. I didn’t try it (not would recommend) but I imagine it could hold my weight OK standing on it to give you an idea of the heavy build quality.
randy randall
Reviewed in the United States on January 13, 2019
Works great. Very easy to build. Good quality. I bought separate casters to attach to the pre drilled holes
Recommended Products
$79.95
$ 31 .99 $31.99