Your cart is empty.
Your cart is empty.4.1 out of 5 stars
- #17,181 in Electronics (See Top 100 in Electronics)
- #6 in Tablet Digitizers
This premium IPad 5 2017 touch screen is the perfect replacement for cracked screen/glass or non-functioning / unresponsive touch screen. We only use components that are identical or very similar to those used by the original manufacturer. We hope that your ipad can be restored to a completely new state.
*PLEASE NOTE* This is a replacement digitizer for the IPad 5 2017. The LCD screen is not included.
Compatibility：
Compatible with all IPad 5 2017 Models A1822 A1823 WIFI GSM CDMA High quality product!
Packaging Includes:
For IPad 5 2017 Glass Screen Digitizer Complete Full Assembly with Home Button, Camera Bracket and Adhesive PreInstalled
Tool kit incl：
1x1.5mm phillips screwdriver 1xBattery Isolation Tool 1xMetal Knife Opener 1xPlastics pry bar 2xOpen shell fragments 1xSuction cup 1xCleaning cloth
NOTE:
DO NOT glue touch screen with your ipad until you TEST and make sure it works with your ipad.
If you don't know how to install it, we suggest you to find a professional technician to do for you-parts damaged during installation are not accepted for return.
Installation guide is not included.We recommend that you watch online video installation on youtube or consult professionals for help to ensure a successful installation.
CONTACT US:
For any inquiries regarding the product or service, please contact us and we will do our best to solve your problem within 24 Hours.Thank you for your co-operation.
nicholas
Reviewed in Canada on January 1, 2025
Took the time to install it cleanly, works well. Recommend and glass screen protector.
都合により名無し
Reviewed in Japan on August 18, 2024
少し苦労しましたが、交換できました！不具合ありません！
Benjamin Ramsl
Reviewed in Germany on May 14, 2024
The media could not be loaded.
2487
Reviewed in Japan on March 23, 2024
粘着テープの着きが悪くうまくつかなかった、もう一度剥がして接着剤B-7000で接着し直した。
Must Qalander
Reviewed in the United States on February 21, 2022
I have never done any repairs to ANY digital equipment in my life so this was a life saver. Our options were to get rid of our 2015 ipad or attempt repair since Apple's cost to repair was ridiculously expensive. Frankly, the original ipad screen is difficult to remove and saving the original fingerprint button is difficult, so I was very happy that this product came with its own button already in place and works great [but does not recognize the fingerprint]. I don't need this feature and hence happy with the purchase since most apps have already gone to face ID, I think this feature is not needed. The screen has good adhesive and I did not need to add more tape or adhesive. Glass is of good quality and touch screen works great. The only difficult part is taking the original ipad screen off. Do see a few youtube videos to see the installation steps since it will help you a lot. Wear eye protection and gloves to avoid any injuries during original glass removal. This product helped me save a lot of money than giving it for repairs to apple or repair shop. We have used it for about a month now and everything working great.
Papa Doc
Reviewed in the United States on February 27, 2021
Never done this before. Tips: Don’t panic when you get a box with ZERO instructions, not even a website reference. I guess they figure if you can’t figure out how to use what has been shipped then you don’t need to be attempting this repair. Don’t panic - YouTube has your back, after watching a few different videos you will find this is an excellent kit. The tools supplied are perfect, especially the metal bar, and the black pick and push stick. Key things to pay particularly close attention too that doesn’t get addressed in videos is reattaching the glass flat cables. You just have to make sure the two cables that push in are aligned before pushing them down and set, just use fingertip to apply pressure till they seat. The third cable make sure the clasp is open and use pusher to seat it under the clamp, I had to push it a little to get it under the clamp. To clean the old adhesive I used acetone, goo gone, t-shirt swatches and the metal and plastic pick. Once completely clean, the new one stuck just wonderfully, looks factory. Be sure before you stick the glass the cable slack at the hinge point is tucked and doesn’t get pinched between the case groove and the glass. When sticking the glass concentrate on the button alignment and not pinching the glass cables and the rest of it will fall right in place. After completing it I realized the kit is great. Having the pre applied adhesive is so much easier and with this kit you can ignore the button removal from the old one, also nice.Update: I have found the fingerprint recognition doesn’t work with this new button. Everything else seems fins so far.
Manuel de Kathen
Reviewed in Germany on December 6, 2019
Display funktioniert und es passt ganz gut. Es sieht sehr gut verarbeitet aus und der Kleber hält auch so wie er soll. Nun zum Negativen, der homebutten lässt keine Finger ID zu, also muss man immer den Code angeben, finde dies sehr Ärgerlich.Nachtrag: Display löst sich da der Kleber wohl doch nichts taugt, das Gerät macht was es will und öffnet zig Seiten oder schließt Seiten. Mag ein Einzelfall sein. Würde es aber nicht wieder kaufen und kann es auch nicht weiterempfehlen
Skeezix
Reviewed in the United States on November 14, 2019
See latest edit at bottom for details on 1 star rating.1st installationInitially... this seemed to be a mostly viable affordable solution despite visible imperfections and 'wavy-ness' in the screen. With close attention to instructional videos I found online I completed the repair in a relatively straightforward and anal-retentive manner that took me about 3.5 hours. Everything seemed to go according to plan. However when I was completely done I noticed the glue along the right side edge of the screen did not fully adhere and there is discernable movement when I press on that edge despite ensuring I had cleaned away any old glue and made sure the screen fit in properly before exposing the adhesives and fixing it into place. I attempted to apply consistent, even pressure overnight with some books and a heavy stapler to keep the screen edge in contact overnight but it didn't solve the problemFor the moment everything functions as needed but that movement along the right edge of the screen has me worried it will eventually work it's easy loose and I'll have to install another screen (a process I'm not anxious to repeat).I will update my review as things progress. Honestly, if it doesn't get any worse and continues to function properly for another few months, I'll add another star.Edit:I added an additional star since, upon hearing my concerns, the company sent me a replacement. I have not yet installed the newer one mostly due to a lack of time. However, while there is an area (near the button cable junction) that remains loose, it has not gotten worse.Another problem I have had which I cannot necessarily attribute to the replacement screen is that my iPad now seems excessively sensitive to case cover magnets which tell it when the cover is closed/opened (on multiple models).Edit: I removed 3 stars after the 1st screen began reporting phantom touches all the time making the iPad unusable. The replacement screen's glue was worse than than the first, the camera cutout is in the wrong place and entire screen keeps moving around and trying falling out while FaceTimeing. And the ghost touch problem returned.I'm going to try a different brand.
Red
Reviewed in the United States on April 20, 2019
Dropped my ipad 5th generation 128gb ($299 from costco) on the power button edge, screen cracked and power button seized up. Initially ordered another touch screen digitizer that cracked right out of the box. This one was awesome. By the way, i consider myself a excellent diy person, but never messed with an iPad or similar electronic. This product was great righ out of the box( regret not making a video), the Phillips screwdriver was the right size and magnetic. The touchscreen had pre-glued on strips. Disposable wipes were ok, but i had to use a microfiber cloth to clean the lcd screen before final installation. The home button doesn't support fingerprint, so i warmed up the bracket holding the preinstalled one on, removed it, and slipped it my old one.Overall I found everything to be just what's needed.I had to remove power button, sand it down a little, scraped off glue from inside edges where old touchscreen was, followed YouTube videos. For $24, I saved $250 what apple was asking for touchscreen ( not to mention the power button problem)
Recommended Products
