Your cart is empty.
Your cart is empty.
FLIR MR160 IGM Moisture Meter, Infrared Guided Measurement, Built-in Thermal Imager, Integrated Pinless Sensor, External Pin Probe, Rugged Design, Internal Rechargeable Battery
Featuring Infrared Guided Measurement (IGM), the MR160 helps you quickly target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings
integrated pinless sensor and an external pin probe provide the flexibility to take either intrusive or non-intrusive measurements. The MR160 can serve as your go-to troubleshooting tool right out of the box
Key Features
- Built-in Thermal Imager
- Integrated Pinless Sensor and External Pin Probe
- Infrared Guided Measurement
- Stored Image Capacity up to 9999 images
- Automatic Image Calibrator
- Color moisture alert
- Portable, Tough and Durable
- Easily investigate insulation and moisture issues
Specifications
- Image Display: Color moisture alert
- Minimum Focus Distance: 10cm (4")
- Spectral Response: 8–14 Micro m
- Thermal Image Resolution: 4800 pixels (80 × 60)
- Thermal Imaging Detector: FLIR Lepton microbolometer
- Field of View (W x H): 51° × 38°
- Image Calibration: Automatic
- Image Frame Rate: 9 Hz
- Measurement Resolution: 0.1
- Pin Moisture Groups: 9 material groups
- Pin Moisture via Ext Probe Range (Accuracy): 0–100% WME (± 5%)
- Pinless Measurement Depth: 0.75" (19mm) Max
- Pinless Moisture Range: 0–100 relative measurement
- Response Time Pinless: 100ms
- Response Time Pin Mode: 750ms
- Thermal Sensitivity: less than 0.15°C
- Battery: 3.7 V, 2600 mAh Li-ion rechargeable via micro USB
- Battery power\Cont Run Time: 18 hours MAX
- Packaging Size: 4.7" x 5.5" x 13"
Triplezeus
Reviewed in the United States on October 6, 2024
Pretty cool to find hidden moisture in walls that not seen on the surface. Really good price on what it can find.
Tom
Reviewed in the United States on April 24, 2024
Did not work as advertised. Provided wrong readings with the touch prongs. Also, the image on the screen was terrible. I expected a better product from Flir. I even called customer support. The customer support person had to get a FLIR MR160 tester in front of him so that we could discuss the issues with my device. The customer service person's device also had wrong readings. He said that the devices were defective and told me to return my device for a full refund. Too bad FLIR couldn't make an accurate water leak tester.
Brockley
Reviewed in the United States on May 16, 2023
From everything I've known flir is supposed to be the who's who of thermal imaging and test and diagnostic equipment.I guess you have to get into the thousand dollar plus range to get a thermal image that's discernable from flir, because let me tell you I've watched scrambled static HBO porn when I was a kid that had a better picture than this thing. Absolutely can't tell what anything is and the color that's supposed to indicate moisture Is just on random objects but also very static looking.On the moisture meter side it's ok'ish. I mean it can kinda get you close to a maybe accurate reading but for $700.00 I want to be with in +- 1% on multiple material options.I'll be straight up honest and tell you right now I wanted to love this thing but its a $700.00 kinda works moisture probe.My cheap Home Depot moisture probe that cost me $40.00 does a way better and much more accurate job then this thing.Then the worst part I've returned it and they're telling me it's going to be a minimum of 30 days before they'll issue a refund and an additional 5-7 days to show up in my account. What a joke .Giving it an extra star because it does feel solid and well built but that's about it.
Maurice
Reviewed in the United States on September 23, 2022
Was very easy to use and very accurate.
Santiago Aguilar
Reviewed in Mexico on July 14, 2022
Ayuda a encontrar el problema muy rápido y correco
Stranger
Reviewed in Canada on February 16, 2022
Old tech. not worth the money, video lags and the images are not clear - you'll save money with a newer handheld thermal camera and a conventional moisture meter.no where near worth $800.00, returned very quickly.
Aram Mehvari
Reviewed in Australia on November 19, 2022
Not relaible, very old looking software, does not work proper
Nico.D
Reviewed in France on April 16, 2020
Formation gratuite en ligne à son utilisation. Dommage que la caméra thermique ne soit pas plus précise avec la possibilité de relever la température. L'emplacement du capteur d'humidité n'est pas optimal mais il fonctionne bien.Je reste satisfait de mon achat.
gregorio
Reviewed in Italy on August 1, 2019
Per quanto costa... Non ne vale la pena... La qualità delle immagini è scarsissima, mi ricorda i primi telefoni a colori degli anni passati... Muovendo lo strumento appaio sul display delle zone blu come ad indicare la presenza di acqua da tutte le parti ma... Solo tenendolo immobile si riesce a capire davvero se c'è o meno l'acqua nella superficie ispezionata
georgia r
Reviewed in the United States on October 9, 2019
This is a nifty little tool. We use it in our business for Mold Inspections and it is serving us well.
Emanuel Lovriha
Reviewed in the United States on February 3, 2018
The pictures are no where as clear as on the advertisements, very grainy and usually cant make out what it is without having an actual photo of the area to refer too.
Brandon B.
Reviewed in the United States on March 29, 2017
I've had it for 2 years now and I love it. Fantastic product if you're in the market for one. Very simple to use. Only wish it came with a portable hard case.
Moose1
Reviewed in the United States on November 25, 2015
I purchased this as a moisture meter with the added feature of having a visual aid. Does a reasonably good job of being a moisture meter, plus it has a pin probe that connects to the bottom. Opening the package there is a dearth of helpful information, though, and I soon discovered that I had a pre-Oct 2015 version that needed a firmware update. I was missing the palette choice, delete option for captured images, and other advertised features.Also, you need to dive into the root software for the basic operating instructions (hook up the meter to a computer and read what's on the unit). This is the only place you'll find the list of wood species by Group number. Really all very non-intuitive.Finally, when updating the firmware you must use a PC (Windows) computer rather than Mac, otherwise it won't take.The unit is nice and robust, and has a lot of clever features. Just get the firmware update and it will work ok.
Recommended Products
