Your cart is empty.
Your cart is empty.Product Description
Multi-material
PEI print surface
PEI coated on stainless steel plate
Frosted print surface adheres well to filament
Can be heated up to over 200℃
PEO print surface
Stainless steel plate covered with a PEO film
The diamond pattern provides good adhesion and can be reprinted with a unique pattern on the bottom surface.
Can be heated up to over 80℃
PET print surface
Stainless steel plate covered with a PET film
The carbon fiber pattern provides good adhesion and can be reprinted with a unique pattern on the bottom surface.
Can be heated up to over 200℃
Applicable filaments
The PEI and PET could heated up to over 200℃ so it can not only print PLA, TPU but also ABS, PETG, PA, PC and other filaments.
And the PEO will be melt at 87-140℃，please keep the bed temperature lower than 85℃
Single side coated PEI
This item includes:
Single side PEI printing plate x1
Magnetic base x1
Double side coated PEI
This item includes:
Double side PEI printing plate x1
Magnetic base x1
PEI on one side, PEO on the other
This item includes:
PEI & PEO printing plate x1
Magnetic base x1
PEI on one side, PET on the other
This item includes:
PEI & PET printing plate x1
Magnetic base x1
Tips
Please leave a gap between the nozzle and printing surface before printing otherwise the heated nozzle may damage the surface.
And it also adheres well to filament.
165x165mm
Flashfoge Adventure 3
Ender 2 pro
LuzBot Mini 2
Geeetech E180
220x220mm
MK2/MK2A
Anet A8
Anet A6
Wanhao Duplicator i3
Artillery Genius
Anycubic Kobra / Neo
235x235mm
Ender-3 Pro
Ender-3 V2
Ender-3
Ender-3S
Ender-3X
Ender-5
Ender-5 Pro
CR-20
CR-20 Pro
310x310mm
CR-10
CR-10S
Artillery Sidewinder X1 X2
Tevo Tornado
230x150mm
Flashforge Creator Pro 2
QID1 X-pro
270x200mm
QIDI X-Plus / I-Mates
250x265mm
Anycubic Vyper
AnkerMake M5 M5C
300x255mm
Sovol SV01 SV01 Pro SV02
QIDI X-Max / X-CF Pro
VWBARRIOS
Reviewed in the United States on March 6, 2025
Been using for a few years now. Now issues at all. I love it.
Carl Oskar Nordstrand
Reviewed in Sweden on February 8, 2025
Funkar väldigt bra, ger bra överföring av mönstret till detaljen.
Donald O'Hearn
Reviewed in the United States on February 7, 2025
I searched for a 3D print bed compatible with a Lulzbot TAZ 5 and 6. I purchased two versions/mfrs from the list. One product fit and the other, above, did not. My complaint is that the search added the incorrect model/size. Maybe partly my fault for not looking closer.
Joe Gustainis
Reviewed in the United States on February 3, 2025
My bigger prints, even with 60C bed temperature would not reliably stick…. It is a very slick surfaceIt seemed to be easily solved by sanding the platform using my random orbital sander with 120 gritI only sanded one side, and wrote in sharpie”120” on that side….Subsequent prints were ok!
STB
Reviewed in Italy on February 25, 2025
Eseguendo stampe in PLA o ABS avevo difficoltà a staccare le stampe, una volta terminate, dal bed della stampante.Cercando in rete sembrava che la soluzione fosse quella di utilizzare un piano magnetico da mettere sopra al piano riscaldato della stampante.Ho trovato questo piano e devo dire che funziona bene. Le stampe si attaccano senza lacca o altro e ai staccano facilmente
Alan Siffer
Reviewed in the United States on February 19, 2025
This build plate is light years better than the original plate that came with my printer! Far exceeded my expectations, and highly recommend it for anyone looking for a replacement plate.
HoWi
Reviewed in Germany on January 5, 2025
Preis und Leistung ist OK, kann man empfehlen
Customer
Reviewed in the United States on January 24, 2025
Awesome plate. Holds my PETG better than PEI. I can print at a wide range of temperature on it also. The hologram effect looks good on certain prints but I didn't really buy it for that. I don't need to just use my cool plate anymore for tough projects. I do have to take extra care with it but I think it's better than a rough surface for most detail and stability. I also had to reduce the Z offset slightly and flow on the first layer.
Kyle
Reviewed in the United States on January 21, 2025
I upgraded to this pei bed after printing on glass for years. It makes a huge difference in how well prints stick and doesn't require any glue stick. The spring steel is really nice. Pay close attention to how it directs you to install the magnetic base so that you get it on your bed straight.
Amir J.
Reviewed in the United States on January 15, 2025
Works great on my artillery sidewinder X1
Álvaro
Reviewed in Spain on August 29, 2024
Compré la versión con patrón en ambas caras, carbono y liso para la impresora cr-10 (310*310) y encaja a la perfección. Ambas dejan la primera capa con esa textura. No he necesitado añadir ningún fijador, al menos con PLA y TPU que es lo que he probado. El montaje, es sencillo pero no vayas a lo loco, despega la pegatina poco a poco y pon a precalentar la mesa para que resulte más fácil.
Ray
Reviewed in the United States on July 23, 2024
it has always been a complaint of mine that the print bed was not removable on The Flashforge Dreamer. It was a total pain to remove printed items from the print bed. This was a simple install. I did go back in and use rubbing alcohol to make sure that I took all of the adhesive off from of the original bed laminate. Installed the magnet for this one and haven't looked back since. I was amazed with my very first print of pteg filament once I upped the print bed temperature. I did raise the print bed temperature up from 50 Celsius to 70 Celsius. No adhesion issues at all. no glue needed. I would highly recommend this as an upgrade for anyone who owns a Flashforge Dreamer. The only thing I would have done differently is make the handle portion that you grab a little larger and possibly have rubber covering it so you do not risk burning your fingers. You can print back alignment corners for your print bed so that your plate sits in there just perfect each time for easy alignment.
attamans
Reviewed in the United Kingdom on October 9, 2024
A worthwhile upgrade for my Creator Pro 2 printer. Having had problems in the past with prints not sticking to the build plate and coming loose during printing, the AJOYIB double sided textured PEI building plate is a joy to use. Set the build plate temp to 55C for PLA filament, your print will stick and not move during printing and removing finished prints is so easy no need to scraping it off and risk damaging the build plate and printer. for me an easy recommend purchase.
Recommended Products