Your cart is empty.
Your cart is empty.Product Description
- A = 1.75 inch
- B = 2.95 inch
- C = 1.57 inch
- D = 0.4 inch
- Swing Dia: 8 inch
- Weight: 1.56kg
- The scope of application of the tool post holder set is determined by the main tool post, namely OXA 250-000. The specific size of the main tool holder is shown in Figure, followed by the swing diameter (the space range) and the extension range of the tool holder to confirm whether it is suitable.
Package Includes
- 1 x OXA 250-000 Tool Post
- 1 x OXA 250-001 Tool Holder
- 1 x OXA 250-002 Tool Holder
- 1 x OXA 250-004 Tool Holder
- 1 x OXA 250-007 Tool Holder
- 1 x OXA 250-010 Tool Holder
- A = 0.47 inch
- B = 1.18 inch
- C = 3/8 inch
- D = 1/2 inch
- Weight: 0.63kg
- A = 0.126 inch
- B = 0.55 inch
- C = 1.38 inch
- Blade Height: 1/2 inch
- Weight: 0.37kg
- A = 0.53 inch
- B = 1.77 inch
- C = 1.18 inch
- Clamping Range: 3/16-1/2 inch
- Weight: 0.34kg
Bob
Reviewed in the United States on February 9, 2025
You can’t go wrong! I’ve used this in conjunction with the 12mm tool shanks of various configurations with no issues for about a year now. I use this on a 1956 10” South Bend and cut material from annealed tool steel, stainless to delrin.
Customer
Reviewed in the United States on February 4, 2025
The company listed as support will not offer any assistance for this product. Instead they will tell you to look up the product on Ebay for any help!!! The tool is very nice, we'll build but I wouldn't buy again from this company
Daniel Gervais
Reviewed in Canada on February 19, 2025
perfect
E. M.
Reviewed in the United States on January 10, 2025
I stuck it in an Atlas QC 54. Machined down the T nut to fit and had to machine down a small portion of the compound slide to sit flat and rotate. Every lathe is different. Very happy with the quality.
Tylluaun
Reviewed in the United States on September 9, 2024
Excellent addition to the mini lathe I have. Makes tool adjustment a breeze!
chris smith
Reviewed in the United States on September 8, 2024
Needed some modifications to fit my lathe
Roy S.
Reviewed in the United Kingdom on June 9, 2024
The item looked to be good but it was returned has it was to big
Reg Keown
Reviewed in Canada on November 24, 2024
This set allows me to do some pretty non standard stuff like fixing the post in a milling vise and feeding stock vertically from a quill mounted 6" 3 jaw Chuck.
S. Edwards
Reviewed in the United Kingdom on April 10, 2024
You will need to modify the mounting post to fit an individual lathe. In my case I made a new post to fit the cross slide T slot. I also made a handle and put a bearing to allow the tool post to be locked in place with very little effort. I also milled out some of the toolholder to fit larger tools. In summary if you are able and willing to do some work this will fit almost any small lathe.
steven p.
Reviewed in the United States on December 21, 2023
To mount this tool post on my jet lathe, I had to mill about .125" off the top of the cross slide to lower the tool height...also cut down and studded the new center mounting bolt onto the existing tool post bolt. Installed some inserted cutting tools and now I cant belive the finish on on my work!!!
ryan
Reviewed in the United States on January 21, 2023
All in all a good product. Repeatability isn't perfect. You get a small error from switching tools. Very sturdy though.
windsurfer
Reviewed in the United States on December 11, 2021
The wedge mechanism is a little sloppy. While unscrewing the tool post to accept the tool holder, the wedge separates from the worm drive, making it impossible to mount the holder. I learned to guide the wedge so that it sticks to the tool holder surface so that I can mount the holder to the post. I also have to file the burrs and sharp corners. But, they are well made and solid. You cannot go wrong with the set unless little things bother you. In that case, you have to spend a good $500 for a production tool holder set.
Recommended Products