Your cart is empty.
Your cart is empty.Product Description
ESKONKE Thread Locker Advantages :
- Enhanced Efficiency: Simple operation, room-temperature curing, and fast curing. Ideal for frequent disassembly and installation.
- Vibration/Shock Resistance: Locks bolts and nuts, effectively resisting vibration and shock to ensure equipment stability.
- Penetration & Sealing: Enhances resistance to rust, stains, and corrosion in threaded connections.
- Simplify the Process: No tools required. Simply apply the adhesive to the desired area for bonding.
- High Strength after Curing with Minimal Shrinkage: Uncured overflow can be easily removed.
- Excellent Durability: Performs exceptionally under pressure, vibration, impact, and chemical exposure, with resistance to extreme temperatures, corrosion, and moisture.
- Solvent-free Product: EP and pollution-free during use. Safe and easy to transport/store.
- Cost Savings: Eliminates the need for spare gaskets and traditional fasteners of various sizes, reducing inventory costs.
ESKONKE Thread Locker VS Traditional Anti Loosening Devices:
- Perforated Screws with Pins: Requires precise alignment of pins and holes during assembly. ESKONKE thread locker simplifies the process with quick, tool-free application.
- Nylon Self-locking Nuts: Prone to gap formation over time, reducing effectiveness. ESKONKE thread locker fills gaps completely, forming a durable thermosetting plastic for long-term stability.
- Spring Grommet: Risks damaging contact surfaces and weakening structural integrity. ESKONKE thread locker provides non-invasive, high-strength bonding without surface damage.
- Ribbed Flange Nuts: Requires larger support surfaces, which can damage contact areas and still allow loosening over time. Gaps between nuts and screws lead to wear. ESKONKE thread locker fills these gaps, creating a unified, wear-resistant connection.
Key Advantage: Traditional devices fail to prevent corrosion in harsh environments. ESKONKE thread locker forms a protective sealing layer, ensuring corrosion resistance and long-lasting performance.
Usage Instructions for ESKONKE Thread Locker
- Preparation:
Shake well before use to ensure uniform composition. Clean and dry the fastener surface, removing any oil or contaminants.
- Curing Mechanism:
The product requires air exposure to cure. Note that the bottle contains only 4/9 liquid volume to prevent premature curing.
- Application Limits:
1. Not recommended for bolts ≥M32, as excessive thread clearance may reduce curing speed and bond strength.
2. Compatible with common metals: carbon steel, stainless steel, alloy steel, copper, aluminum alloy, and titanium alloy.
3. Incompatible with non-metallic materials: stone, plastic, rubber, wood, paper, glass, ceramic, cement, and fiber.
- Environmental Restrictions:
Avoid use in pure oxygen, oxygen-rich, pure chlorine, or chlorine-rich environments. Not suitable for sealing hydroxide materials.
- Storage & Handling:
1. Do not pour unused adhesive back into the bottle to prevent contamination.
2. Cures without smoke; seal tightly after use to preserve active ingredients.
3. Store in a cool, dry place at room temperature, away from direct sunlight and high heat.
Richie
Reviewed in the United States on March 8, 2025
Well, this is kinda hard to review. It’s locked tight used too much. You know what happens. Don’t use enough you know what happens.
Guitar Man
Reviewed in the United States on March 7, 2025
Very good product. Just as good as more expensive brands. Will buy again.
D-Rain
Reviewed in the United States on February 19, 2025
this is a great alternative to other higher priced lock tight. A little goes a long way. I prep race cars so i use this on a daily basis. Works great is not messy at all. This is the red i believe they make blue too i have had to use heat to remove some bolts but it has a great heat resistance its filling capacity is nice and you can use a little or a lot depending on your application. Excellent locking dispenser lid and makes for precise application on smaller fasteners.
Customer
Reviewed in the United States on February 18, 2025
Great price and fast delivery.
YouTube Product Reviewers
Reviewed in the United States on January 8, 2025
Exactly as expected and works well.
Dad
Reviewed in the United States on July 3, 2024
I used two nuts on a piece of 3/8 inch threaded rod as a test case before using this for internal components in my YZ dirtbike. I let it threaded rod sit and cure for 24 hours. The nuts locked up much tighter than I expected for something advertised as removable. I’d say it’s closer to Loctite blue. I’m happy with it. Used it in my engine on all the small retaining screws. Easy application tip. Worked excellent.
Jesse
Reviewed in the United States on March 29, 2024
Ok, so here goes. For anyone who is confused or just inexperienced, blue thread locker is what most people would use to hold their nuts and bolts in place, or anything that needs a more than temporary setting. Blue is much easier to remove than the red and is more common, however depending on your applications needs red may be the option u need. That being said, i use loc-tite on a number of things, especially my RC cars and drones.Recently I purchased a new Traxxas XRT and found that although the pinion gear comes from the factory with blue loctite u actually need/should use red. I used the standard red-271 and found that I was unable to get the pinion gear to stay seated for more than one run. Sometimes even that was difficult. I stripped many farts because of this until I looked into red loc-tite (272). This is supposed to be used for a more permanent solution and or for higher temps, and or heavy vibration or excessive hits, bumps whatever. It actually is a bit thicker too. Although it was only a small difference, it ended up making a large difference as it held great for nearly 3 different race sessions.Obviously don’t use this for everything but if u are having problem getting set or grub screws to stay in place, think about using this.Works very well!!
Tony Cole
Reviewed in the United States on December 19, 2023
My main use for this if for a little RC helicopter that holds super tiny screws that gets a lot of vibration, i have tried several types of thread lockers for over a year, non were working, until i tried this one, and i have flown my little helicopter countless times and finally my mini rc helicopter blades or not coming off.I'm extremely happy about this.I run a small RC helicopter that runs at very high RPM and several previous thread lockers would only work for a few flights then the mini screws well get loose and heli blades will just come off. This product has finally held the mini screws in place. I'm very happy about this product, extremely happy after more than a year trying different thread lockers, finally found one that holds the super tiny mini screws in place.The screws are so tiny that if i drop the screw while holding it, they are hard to find. So yes, super tiny. Great thread locker, super strong.
Recommended Products