Your cart is empty.
Your cart is empty.4.8 out of 5 stars
- #11,973 in Musical Instruments (See Top 100 in Musical Instruments)
- #115 in Electric Guitar Hardware
Set of 4, pop-out socket mount. 2" diameter x 7/8" Ruberex wheel split level. Maximum recommended weight is 70 lbs per caster. Part number 6102.
J.P.
Reviewed in the United States on January 6, 2025
I adapted these casters to my 1960A Marshall cab using 2 inch round neoprene rubber washers and they work great. More practical and less expensive than the original caster wheels from Marshall.
veritas
Reviewed in Australia on July 2, 2024
Bought to fit to a Fender Champion 100 2 x 12" combo. Not fitted yet, but a straightforward fitment with the right sized 5/8" spade drill. Bonus. The Ernie Ball set comes supplied with its 16 x 14.1 required woodscrews included which saved me from having to source them, as they are an both oddball size (gauge & length) not on the shelves in the average hardware store here in AU where non-metric is difficult to source. Buying by the pre-pack, woodscrews are not cheap either, so appreciated value adding by Ernie Ball. I was surprised that there was no included printed mounting template, but no dealbreaker. Easy enough to make one.Otherwise, the casters are as described. All swivels with no brakes. The actual wheel bearings are plain bearing instead of ball bearing, but for long term zero maintenance use that's arguably a positive in this application as plain bearing is more resistant to rusting and seizure. Ruberex wheels like the rest of the pressed caster assembly seem robust and up to the job. Would buy again. Recommended.
Allen Hoffman
Reviewed in the United States on May 4, 2024
I install these on to Marshall to 12 cabs and they work very well
Jonathan R. Collier
Reviewed in the United States on March 14, 2024
These are excellent casters; I have purchased three sets and put them on a combo, 412 cab and 410 bass cab. Smooth rolling casters; not noisy at all and very sturdy.
Steve O.
Reviewed in the United States on December 28, 2024
Did the trick. Easy install on an old Marshall cab.
Jonathan
Reviewed in the United States on November 7, 2024
Used these for my bands tour around the country and these wheels held up great in multiple terrain including rocky areas and asphalt. Would definitely recommend them for others to use.
AdamH0101
Reviewed in the United States on April 17, 2024
Bought these for my fender rumble for those downtown gigs parking far away. Hated having to carry a dolly with me. This is going to work much better and can easily stack things now. Barely added any weight. They pop right out so your rig can stay the same size. Wheels are good quality and size, not noisy but I can see them possibly getting squeaky after years of use (probably just spray some wd40 though). Really nice heavy duty screws. Great value overall!
Dario ACCETTA
Reviewed in Italy on May 29, 2023
Avevo necessita' di utilizzare un grosso amplificatore Fender da basso dopo molti anni. Quattro giorni prima dell'uso mi sono accorto che le rotelle erano distrutte per cui ho cercato una sostituzione su Amazon ed ho trovato questo articolo... ma i tempi di consegna erano inconciliabili con il mio impegno. Le ho acquistate ugualmente provando a chiedere cortesemente la consegna ben 3 giorni prima del previsto: sono stato immediatamente contattato dal fornitore MUSICALSTOREche mi ha costantemente aggiornato sullo stato della spedizione che e' arrivata incredibilmente in tempo per le mie necessita, in soli due giorni. Un servizio davvero eccellente !!! E le rotelle sono state immediatamente installate con grande facilita' adattandosi perfettamente negli slot privisti.
Sumo Doug
Reviewed in the United States on May 16, 2023
These were the perfect fit for my Fender Bassman Ten amp. Easy to install. Perfect size and balance. So much easier to move now that I’ve replaced the originals.
pat martin
Reviewed in Canada on April 18, 2023
Worked great. Good quality
Joolsg007
Reviewed in the United Kingdom on March 27, 2018
Bought these as a replacement for my Hartke HyDrive 4 x 10 Bass Cabinet as the old wheels werepretty well worn and the cabinet was quite wobbly.The new Ernie Ball pop in Casters fitted the the existing holes but the screws were considerablybigger so were quite stubborn at times but all went well.Just a tip with installation - remove the rollers first!!
Christian S.
Reviewed in Germany on April 7, 2013
Heavy, sturdy and reliable. I bought this set to replace Framus Cabinet wheels that broke in just two years. Nice set !
Bad Horsie
Reviewed in the United States on May 10, 2012
I bought these casters to replace the rubber feet on a Peavey MC212 vertical 2x12 cabinet. The cab is fairly compact for a vertical 2x12, so the 2" diameter wheels seemed adequate. For wheel diameter, I wanted to go on the smaller side so that the cab would be less likely to fall over or roll away if bumped, but I think I went a little too small.First, the pros:Wheels roll smoothly and the casters swivel smoothly out of the box. A little marine grease should keep them in good working shape. Installation is quick and simple. Rated at 70 lbs per caster, the set will easily support most combo amps or even small cab/head setups like I use (my rig is well over 100 lbs with a rack head sitting on top of the cab). The small wheel diameter means your gear is less likely to roll away. Quality appears to be very good, except for the unsealed bearings (see below). The plate mount is nice as it minimizes the holes and destruction to your cabinet.Finally, the cons:The wheel diameter is probably too small for anything other than small/medium combo amps, and the wheels looked a little under 2" when I opened the package (or, at least, smaller than I expected). You might as well just carry your small combos. Also, the small wheels handle smooth surfaces just fine, but don't expect great performance on carpet or going over small ledges or bumps (i.e. door thresholds or cables/cords on stage). Also, the caster swivel bearings are not sealed (I'm not sure about the wheel bearings), so dirt and dust may take a toll on performance over time.In summary, this caster does its thing well, but I would only recommend it for small amps/cabs. For $20, it was a decent purchase, and since I don't move my gear a whole lot, I'm happy with the casters. However, if you have a medium or large size amp and can find other casters with a 3 or 3.5" wheel for around $5/ea, you'll be better off going that route.
Recommended Products
