Your cart is empty.
Your cart is empty.Product Description
40mm Heatsink Kit
This 40mm extruded aluminum heatsink kit is designed for Cooling External Hard Drive Enclosure SSD M.2 NVME, Water Cooling Blocks, Thermoelectric Peltier Cooler Modules, Electronic Devices, Robotic Projects, LED Modules, Telecommunication Devices, Wi-Fi Routers, Medical Devices, Solar Invertors, Servers, Industrial Applications, Amplifiers and Audio Equipment, Power Supplies. This set of heatsink is low profile (0.78" / 20mm) and made from 6063-T5 aluminum alloy with high thermal conductivity, structure stability and light weight. The heatsink extrusion is in vertical and horizontal grooves, that is greatly increases the heat dissipation function. The surface of extruded aluminum is anodized. This kit of heatsink comes with pre-applied thermal conductive adhesive tape, for easy installation and optimum heat conductivity.
Specifications
- Material: Extruded Aluminum 6063-T5
- Coating: Anodized
- Color: Black
- Mounting Style: Panel mount / SMD / SMT
- Fin Style: Vertical
- Standard: RoHS compliance
Pre-Applied Thermal Conductive Adhesive Tape
This kit of heatsink comes with pre-applied thermal conductive adhesive tape for easy installation, strong adhesion and premium thermal conductivity.
Divers applications
This set of extruded aluminum heatsink kit, with its high thermal conductivity and efficient design, finds versatile applications across various industries. This set of 40mm heatsink is for cooling SSD M.2 NVMe External Enclosures, Water Cooling Blocks, Thermoelectric Peltier Cooler Modules, Electronic Devices, Robotic Projects, LED Modules, Telecommunication Devices, Wi-Fi Routers, Medical Devices, Solar Invertors, Servers, Industrial Applications, Amplifiers and Audio Equipment, Power Supplies. The 40mm heatsink, with its compact size and efficient cooling capabilities, proves valuable in a wide range of applications where managing thermal performance is essential for the reliable operation of electronic components.
Eric L.
Reviewed in the United States on March 7, 2025
These heatsinks did a great job cooling a hot mini-power amplifier case. They installed in seconds and made my monoblocks amps barely luke-warm to the touch. Recommended.
Luis Robles
Reviewed in Mexico on January 6, 2025
Lo puse en un switch y va bien
Customer
Reviewed in the United States on June 8, 2024
Nothing to dislike here, I mounted in on a tube amp power transformer to reduce heat buildupworks great !
Jeffrey C
Reviewed in the United States on February 6, 2024
Using it to cool down a laptop power brick, working well so far. The preapplied adhesive makes it easy to install.
Ionel Chila
Reviewed in the United States on December 7, 2024
Keep my 2 name enclosures very cool
Bertie
Reviewed in the United States on September 14, 2023
These heatsinks have worked better than I hoped at cooling an external drive.The two heatsinks are well made, very sturdy, no apparent defects, bends, nicks, or blemishes. The top edges of the fan blades are machined smooth. If you stand the heatsink up tall, like an 11 story building, running your finger horizontally across a "floor" will feel smooth. But if you run your finger vertically (up and down like an elevator) it will feel rough, as the corner edges of the fans are not smoothed.Why I wanted a heatsink:I have a 4TB NVME SSD, in an external Thunderbolt 4 drive case. When in use, the drive case could be very warm, hot, even borderline too hot to touch. I worried that the excess heat could potentially reduce the lifespan of the drive or even damage it.I spent a lot of time looking around for different heatsinks and finally chose this one. My reasons:Why I chose this heat sink:• There are 2 heatsinks (2 for 1 pricing compared to others)• The heatsinks come with thermal adhesive already attached. No need to purchase it separately. Just peel off the protective film and stick to your device.• These heatsinks closely match the footprint of my drive case (they are the same length, and nearly as wide)• They tines are tall (which I suspect will help)• I liked the look of the matte black finishThe heatsinks work better than I hoped. My goal was to reduce the heat from 'almost-too-hot-to-touch' to a more acceptable 'hot' or even just 'very warm.' It's far cooler. It's approximately mammal warm or cooler (guesstimate sub ~95F).1 heatsink likely would have been enough. However I used both for good measure.
ReeseReviews
Reviewed in the United States on August 29, 2023
This heat sink works well to bring the extra heat under control for a battery charger we recently bought to keep our car batteries strong.
Dan
Reviewed in the United States on February 24, 2023
I'm using this along with some 80mm server fans to cool the backside of a Dell 3080 gpu. The fans are connected to a Noctua rpm reduction extender, and they sit at ~1500 rpm. This reduced the overall gpu temps by about 10c. Dell sucks but these heatsinks work great.
Jeremy Gorrell
Reviewed in the United States on December 4, 2023
These were dead-simple to install and work quite well - they're helping to keep a fan-less power supply in my bedroom cool and happy. They need a flat surface to stick to and clean the area with alcohol first.
Enrico
Reviewed in Italy on August 23, 2022
Acquistati per aiutare termicamente il pannello posteriore di una coppia di Shape 40 della Focal.Questi dissipatori adesivi sono riusciti ad abbassare un po' la temperatura creata dal trasformatore interno di alimentazione e dall'elettronica.Non erano strettamente necessari, la Focal non credo non abbia considerato il problema ma aiutano comunque a mantenere più bassa la temperatura di esercizio che... non guasta mai.
Andrea
Reviewed in Italy on June 25, 2022
Consegnato puntuale e con cura.Si tratta di 2 dissipatori in alluminio verniciato di nero, dotati di adesivo termoconduttore.Ne ho utilizzato uno sui miei 4 banchi di ddr4 Crucial Ballistix Max 4400, e devo dire che l'adesivo è assolutamente efficace così come lo sono i dissipatori: temperature in idle scese a 30° (-10°) e sotto sforzo non superano i 50° (-5°). Completerò il dissipatore con una ventolina da 40mm ad alta pressione.
Dieter K
Reviewed in Germany on November 16, 2022
Produkt wie beschrieben.Dient als Kühlkörper für meinen Wechselrichter.
Reiner Schütz
Reviewed in Germany on October 20, 2022
Kein Missfallen
Recommended Products