James m Thompson
Reviewed in the United States on March 6, 2025
What u see is what u get
Tony
Reviewed in the United States on March 8, 2024
The Allen wrench fittings strip easily and make this difficult to use more than one time
John Smith
Reviewed in the United States on September 29, 2023
They are a decent quality set but unfortunately, I ordered the wrong ones and truthfully have no use for 3/8 I needed 1/2 set. Not the sellers fault.
chas
Reviewed in the United States on November 5, 2023
Tighten up the hex head fasteners and no problems
Time
Reviewed in the United States on January 23, 2023
This extension set came with three 12" sections, two 6 inch sections and a handle full of Allen keys that were all the same size. The two 6 inch extensions has hex holes that were fairly close to size but on of the 6 inch extensions had the hole drilled/broached at an angle. The three 12 inch extension all had the holes drilled at an angle and all of the holes were 0.030 to 0/.040 oversized which made the extensions and drill wobble really badly. I can not recommend in good faith this extensions. The set I received were very low quality and unusable. I ended up purchasing a 36 inch extension that worked and was a very nice part.
Willian71280
Reviewed in the United States on January 21, 2023
This is the worst extension I have ever seen. I had two screws I had to drive in. these were not new screws with new holes, these were the same screw that was taken out of the same holes so hardly any force was needed. this couldn't even last the first use of driving in the two old screws back into their respective holds. Pathetic craftmanship. Do not buy.
the german
Reviewed in the United States on December 31, 2022
Used an 1" spade drill to drill through a number of studs behind the drywall. I strung together 3, 12" extensions and it just ripped out all set screws in the extensions. The extensions have a round ~1/4" hole about 3/4" deep that is there to accept a drill bit or another of the extensions. Unfortunately, the only thing that keeps the drill bit in place are these two tiny set screws. Also, the hole in the extension is just a little bit oversized to accept the bit. as a result, the bit is sitting slightly off center and as you drill, the entire assemble starts to gyrate until it literally blows itself apart.
Kevin
Reviewed in the United States on April 9, 2022
They are exactly what they say they are. I use them with countersinks and they work great.